Index |
active-active configuration, 1
active-standby configuration, 1
failed component description, 1
silencing, 1
mounting, 1
automatic rebuild, 1
BAD drive status, 1
battery support, 1
muting, 1
bus configurations, 1
cables supplied, 1
customer-provided, 1
drive IDs label summary, 1
dual bus configuration procedures, 1
dual bus drive IDs, 1
Ethernet connection, 1
Expansion Units, 1
limited number of drive IDs, 1
picture of connections, 1
RS-232 connection, 1
single and dual bus configurations, 1
single bus cabling procedures, 1
single bus drive IDs, 1
summary, 1
cache status, 1
set as host or drive, 1
clearances to allow, 1
concurrent rebuild, 1
first-time minimum, 1
key steps, 1
minimum requirements, 1
Configuring a Linux Server, 1
Configuring a Server Running the Solaris Operating Environment, 1
Configuring a Windows 2000 Server, 1
Configuring a Windows NT Server, 1
Configuring an HP Server Running the HP-UX Operating Environment, 1
Configuring an IBM Server Running the AIX Operating Environment, 1
controller assignment, 1
controller failure, 1
controller IDs, 1
controller limitations, 1
controller NAME, 1
controller voltage and temperature, 1
logical drive, 1
customer obligations, 1
DHCP, 1
drive channel defaults, 1
drive ID limitation, 1
dual bus configuration procedures, 1
dual bus drive IDs, 1
dual-bus configurations, 1
Dynamic Host Configuration Protocol, 1
electrical specifications, 1
electromagnetic compatibility (EMC), 1
EMU LED, 1
environmental range, 1
Ethernet connection, 1
event LED, 1
Event Logs, 1
Expansion Unit cabling, 1
fan LED, 1
fault-tolerance, 1
cache status, 1
controller failure/rebuild/replacement, 1
controller firmware upgrade, 1
controller voltage and temperature, 1
cursor bar, 1
gauge range, 1
initial screen, 1
logical drive status, 1
logical volume status, 1
main menu, 1
manual rebuild, 1
navigation keys, 1
quick installation, 1
SCSI channel status, 1
SCSI drive status, 1
transfer rate indicator, 1
view event logs, 1
VT-100 screen selection, 1
VT100 terminal mode, 1
flash all but selected drive command, 1
Flash All Drives command, 1
flash drive time command, 1
flash selected drive command, 1
all SCSI drives, 1
selected SCSI drives, 1
format utility, 1
listing, 1
manuals, 1
gauge range, 1
hardware overview, 1
hardware specifications, 1
host channel defaults, 1
HP-UX, 1
IBM AIX, 1
Linux, 1
Solaris Operating Environment, 1
Windows 2000, 1
Windows NT, 1
host IDs (adding), 1
defined in sd.conf, 1
edit system file, 1
humidity, 1
identifying drives, 1
Identifying SCSI drive command, 1
initial firmware window, 1
INITING status, 1
INVALID status, 1
IP address, setting, 1
dual bus,multi-initiator config, 1
cabling, 1
dual bus, 1
single bus with one host, 1
single bus with two hosts, 1
keys to navigate, 1
drives, 1
front panel, 1
rear panel, 1
controller, 1
checking adapter BIOS, 1
configuring, 1
local spare assignment, 1
128-LUN limit, 1
assign local spare, 1
assign RAID level, 1
change assignment, 1
defaults, 1
ID, 1
larger than 253 Gbyte, 1
LG number, 1
maximum number of disks per logical drive, 1
maximum physical drive capacity, 1
maximum usable capacity per logical drive, 1
minimum requirements, 1
RAID level, 1
RAID level selected, 1
RAID levels defined, 1
size, 1
status, 1
status table, 1
logical drive preferences, 1
rebuilding, 1
logical volume, 1
logical volume status, 1
described, 1
manual rebuild, 1
MISSING drive status, 1
Mounting your array, 1
alarms, 1
beeper, 1
NAME (controller), 1
NEW DRV drive status, 1
maximum size, 1
maximum size, 1
out-of-band management, 1
package contents, 1
phyical drives listed, 1
size and speed, 1
status, 1
physical drive capacity setting, 1
planning site, 1
power LED, 1
power specifications, 1
power supply/fan LED, 1
preparing for logical drives larger than 253 Gbyte, 1
quick installation (not applicable), 1
cabinet-mounting an array, 1
RAID (5+0), 1
concurrent rebuild in, 1
RAID level assignment, 1
defined, 1
selected, 1
RAID levels defined, 1
maximum size, 1
RARP, 1
automatic, 1
concurrent in RAID 1+0, 1
manual, 1
Rebuilding Logical Drives, 1
labeling, 1
explained, 1
silencing failed component alarms, 1, 2
upgrading firmware via, 1
safety precautions, 1
SB-MISS drive status, 1
SCSI channel status, 1
default channels, 1
host or drive, 1
global or local spare, 1
STANDBY mode, 1
USED DRV mode, 1
vendor ID, 1
SCSI drive status, 1
SCSI host IDs (creating), 1
sd.conf file, 1
sd.conf for device files, 1
maximum size, 1
serial port parameters, 1, 2, 3
settings records to keep, 1
silencing alarms, 1
reset button, 1
single bus cabling procedures, 1
single bus drive IDs, 1
single-bus configurations, 1
site planning, 1
console requirement, 1
customer obligations, 1
electrical/power, 1
EMC, 1
environmental, 1
layout, 1
physical, 1
safety precautions, 1
site preparation survey, 1
size of drive, 1
edit sd.conf, 1
edit system file, 1
Solaris 8 reboot, 1
Solaris 9 reboot, 1
configuring, 1
editing sd.conf file, 1
labeling a volume, 1
new devices and LUNs, 1
spare (local for logical drive), 1
spare drives, 1
clearances, 1
electrical/power, 1
physical (array), 1
specifications (product), 1
speed of drive, 1
STAND-BY drive status, 1
system file, 1
system file edit, 1
temp LED, 1
environmental range, 1
temperature LED, 1
transfer rate indicator, 1
USED DRV drive status, 1
enabling for RAID arrays, 1
with a single-bus JBOD, 1
connected drives, 1
labeling, 1
VT100 terminal connection, 1
VT100 terminal mode, 1
accessing HyperTerminal, 1
new devices and LUNs, 1
serial port parameters, 1
Traffic Manager, 1
Copyright © 2004, Sun Microsystems, Inc. All rights reserved.