-A P P E N D I X

A P P E N D I X B

Error and Event Messages

This appendix lists:

Error and Status Messages

Error Codes

Error and Status Messages

The following table lists the onscreen error and status messages for the CLI.


Description
LD-ID %.8X on StorEdge Array SN#%s: ALERT: add scsi drive operation failed
LD-ID %.8X on StorEdge Array SN#%s: ALERT: clone failed (CH%d ID%d)
LD-ID %.8X on StorEdge Array SN#%s: ALERT: expansion failed
LD-ID %.8X on StorEdge Array SN#%s: ALERT: initialization failed
LD-ID %.8X on StorEdge Array SN#%s: ALERT: parity regeneration failed
LD-ID %.8X on StorEdge Array SN#%s: ALERT: rebuild failed
LD-ID %.8X on StorEdge Array SN#%s: ALERT: SCSI drive failure (CH%d ID%d)
LD-ID %.8X on StorEdge Array SN#%s: NOTICE: adding SCSI drive completed
LD-ID %.8X on StorEdge Array SN#%s: NOTICE: adding SCSI drive operation paused
LD-ID %.8X on StorEdge Array SN#%s: NOTICE: clone operation completed), (CH%d ID%d)
LD-ID %.8X on StorEdge Array SN#%s: NOTICE: continue adding SCSI drive operation
LD-ID %.8X on StorEdge Array SN#%s: NOTICE: expansion of logical drive completed
LD-ID %.8X on StorEdge Array SN#%s: NOTICE: initialization of logical drive completed
LD-ID %.8X on StorEdge Array SN#%s: NOTICE: parity regeneration of logical drive completed
LD-ID %.8X on StorEdge Array SN#%s: NOTICE: rebuild of logical drive completed
LD-ID %.8X on StorEdge Array SN#%s: NOTICE: starting add SCSI drive operation
LD-ID %.8X on StorEdge Array SN#%s: NOTICE: starting clone operation (CH%d ID%d)
LD-ID %.8X on StorEdge Array SN#%s: NOTICE: starting initialization
LD-ID %.8X on StorEdge Array SN#%s: NOTICE: starting logical drive expansion
LD-ID %.8X on StorEdge Array SN#%s: NOTICE: starting logical drive rebuild
LD-ID %.8X on StorEdge Array SN#%s: NOTICE: starting parity regeneration
Peripheral Device on StorEdge Array SN#%s: ALERT: current sensor failure detected (sensor %d)
Peripheral Device on StorEdge Array SN#%s: ALERT: current sensor low threshold exceeded (current sensor %d)
Peripheral Device on StorEdge Array SN#%s: ALERT: current sensor low threshold exceeded (current sensor %d)
Peripheral Device on StorEdge Array SN#%s: ALERT: current sensor not present or failure detected (sensor %d)
Peripheral Device on StorEdge Array SN#%s: ALERT: current sensor state changed to critical (current sensor %d)
Peripheral Device on StorEdge Array SN#%s: ALERT: Fan %d cooling fan failure detected
Peripheral Device on StorEdge Array SN#%s: ALERT: Fan %d cooling fan low speed threshold exceeded
Peripheral Device on StorEdge Array SN#%s: ALERT: Fan %d cooling fan low speed threshold exceeded
Peripheral Device on StorEdge Array SN#%s: ALERT: Fan %d cooling fan not present or failure detected
Peripheral Device on StorEdge Array SN#%s: ALERT: Fan %d high speed threshold exceeded
Peripheral Device on StorEdge Array SN#%s: ALERT: Fan %d high speed threshold exceeded
Peripheral Device on StorEdge Array SN#%s: ALERT: Fan %d state changed to critical
Peripheral Device on StorEdge Array SN#%s: ALERT: high temperature threshold exceeded (T#%d)
Peripheral Device on StorEdge Array SN#%s: ALERT: PS%d power supply AC failure detected
Peripheral Device on StorEdge Array SN#%s: ALERT: PS%d power supply AC is OK
Peripheral Device on StorEdge Array SN#%s: ALERT: PS%d power supply DC failure condition ended
Peripheral Device on StorEdge Array SN#%s: ALERT: PS%d power supply DC failure detected
Peripheral Device on StorEdge Array SN#%s: ALERT: PS%d power supply failure detected
Peripheral Device on StorEdge Array SN#%s: ALERT: PS%d power supply high voltage threshold exceeded
Peripheral Device on StorEdge Array SN#%s: ALERT: PS%d power supply high voltage threshold exceeded
Peripheral Device on StorEdge Array SN#%s: ALERT: PS%d power supply low voltage threshold exceeded
Peripheral Device on StorEdge Array SN#%s: ALERT: PS%d power supply low voltage threshold exceeded
Peripheral Device on StorEdge Array SN#%s: ALERT: PS%d power supply state changed to critical
Peripheral Device on StorEdge Array SN#%s: ALERT: temperature sensor failure detected (T#%d)
Peripheral Device on StorEdge Array SN#%s: ALERT: temperature sensor high temperature threshold exceeded (T#%d)
Peripheral Device on StorEdge Array SN#%s: ALERT: temperature sensor low threshold detected (T#%d)
Peripheral Device on StorEdge Array SN#%s: ALERT: temperature sensor low threshold detected (T#%d)
Peripheral Device on StorEdge Array SN#%s: ALERT: temperature sensor not installed or failure detected (T#%d)
Peripheral Device on StorEdge Array SN#%s: ALERT: temperature sensor state changed to critical (T#%d)
Peripheral Device on StorEdge Array SN#%s: ALERT: UPS %d AC line failure condition ended
Peripheral Device on StorEdge Array SN#%s: ALERT: UPS %d AC line failure detected
Peripheral Device on StorEdge Array SN#%s: ALERT: UPS %d battery failure condition ended
Peripheral Device on StorEdge Array SN#%s: ALERT: UPS %d battery failure detected
Peripheral Device on StorEdge Array SN#%s: ALERT: UPS %d DC line failure condition ended
Peripheral Device on StorEdge Array SN#%s: ALERT: UPS %d DC line failure detected
Peripheral Device on StorEdge Array SN#%s: ALERT: UPS %d general failure detected
Peripheral Device on StorEdge Array SN#%s: ALERT: UPS %d state changed to critical
Peripheral Device on StorEdge Array SN#%s: ALERT: voltage sensor failure detected (sensor %d)
Peripheral Device on StorEdge Array SN#%s: ALERT: voltage sensor high voltage threshold exceeded (sensor %d)
Peripheral Device on StorEdge Array SN#%s: ALERT: voltage sensor high voltage threshold exceeded (sensor %d)
Peripheral Device on StorEdge Array SN#%s: ALERT: voltage sensor low voltage threshold detected (sensor %d)
Peripheral Device on StorEdge Array SN#%s: ALERT: voltage sensor low voltage threshold exceeded (sensor %d)
Peripheral Device on StorEdge Array SN#%s: ALERT: voltage sensor not present or failure detected (sensor %d)
Peripheral Device on StorEdge Array SN#%s: ALERT: voltage sensor state changed to critical (sensor %d)
Peripheral Device on StorEdge Array SN#%s: NOTICE: current sensor is ok (sensor %d)
Peripheral Device on StorEdge Array SN#%s: NOTICE: current sensor no longer critical (current sensor %d)
Peripheral Device on StorEdge Array SN#%s: NOTICE: current sensor no longer critical (current sensor %d)
Peripheral Device on StorEdge Array SN#%s: NOTICE: Fan %d cooling fan is ok
Peripheral Device on StorEdge Array SN#%s: NOTICE: Fan %d cooling fan state no longer critical
Peripheral Device on StorEdge Array SN#%s: NOTICE: Fan %d state no longer critical
Peripheral Device on StorEdge Array SN#%s: NOTICE: Fan %d state no longer critical
Peripheral Device on StorEdge Array SN#%s: NOTICE: PS%d power supply no longer critical
Peripheral Device on StorEdge Array SN#%s: NOTICE: PS%d power supply OK
Peripheral Device on StorEdge Array SN#%s: NOTICE: PS%d power supply state is no longer critical
Peripheral Device on StorEdge Array SN#%s: NOTICE: PS%d power supply voltage is OK
Peripheral Device on StorEdge Array SN#%s: NOTICE: temperature sensor is OK (T#%d)
Peripheral Device on StorEdge Array SN#%s: NOTICE: temperature sensor low threshold no longer critical (T#%d)
Peripheral Device on StorEdge Array SN#%s: NOTICE: temperature sensor no longer critical (T#%d)
Peripheral Device on StorEdge Array SN#%s: NOTICE: temperature sensor no longer critical (T#%d)
Peripheral Device on StorEdge Array SN#%s: NOTICE: UPS %d general failure condition ended
Peripheral Device on StorEdge Array SN#%s: NOTICE: UPS %d state change notification
Peripheral Device on StorEdge Array SN#%s: NOTICE: voltage sensor high voltage threshold no longer critical (sensor %d)
Peripheral Device on StorEdge Array SN#%s: NOTICE: voltage sensor is ok (sensor %d)
Peripheral Device on StorEdge Array SN#%s: NOTICE: voltage sensor ok (sensor %d)
Peripheral Device on StorEdge Array SN#%s: NOTICE: voltage sensor state no longer critical (sensor %d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: %s failure detected
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: %s threshold status critical
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: current sensor failure detected (current sensor %d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: current sensor low threshold detected (current sensor %d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: current sensor low threshold detected (current sensor %d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: current sensor not present or failure detected (current sensor %d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: current sensor state changed to critical (current sensor %d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Fan %d cooling fan failure detected
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Fan %d cooling fan not present or failure detected
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Fan %d high speed threshold exceeded
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Fan %d high speed threshold exceeded
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Fan %d low speed threshold exceeded
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Fan %d low speed threshold exceeded
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Fan %d state changed to critical
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply AC failure detected
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply AC OK
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply DC failure detected
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply DC is OK
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply failure detected
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply high voltage threshold exceeded
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply high voltage threshold exceeded
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply low voltage threshold exceeded
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply low voltage threshold exceeded
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply state changed to critical
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: temperature sensor failure detected (T#%d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: temperature sensor high temperature threshold exceeded (T#%d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: temperature sensor high temperature threshold exceeded (T#%d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: temperature sensor low temperature threshold exceeded (T#%d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: temperature sensor low temperature threshold exceeded (T#%d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: temperature sensor not installed or failure detected (T#%d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: temperature sensor state changed to critical (T#%d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d AC line failure condition ended
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d AC line failure detected
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d battery failure condition ended
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d battery failure detected
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d DC line failure condition ended
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d DC line failure detected
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d general failure detected
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d state changed to critical
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: voltage sensor failure detected (voltage sensor %d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: voltage sensor high voltage threshold exceeded (voltage sensor %d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: voltage sensor high voltage threshold exceeded (voltage sensor %d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: voltage sensor low voltage threshold exceeded (voltage sensor %d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: voltage sensor low voltage threshold exceeded (voltage sensor %d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: voltage sensor not present or failure detected (voltage sensor %d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: ALERT: voltage sensor state changed to critical (voltage sensor %d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: %s now online
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: %s threshold status back to normal
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: current sensor is ok (current sensor %d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: current sensor low threshold critical ended (current sensor %d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: current sensor no longer critical (current sensor %d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: Fan %d condition no longer critical
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: Fan %d cooling fan is OK
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: Fan %d high speed condition no longer critical
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: Fan %d low speed condition is no longer critical
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: PS %d power supply high voltage condition is no longer critical
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: PS %d Power Supply OK
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: PS %d power supply state is no longer critical
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: PS %d power supply state is no longer critical
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: temperature sensor is no longer critical (T#%d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: temperature sensor is no longer critical (T#%d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: temperature sensor is no longer critical (T#%d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: temperature sensor is OK (T#%d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: UPS %d general failure condition ended
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: UPS %d state change notification--check UPS
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: voltage sensor is OK (voltage sensor %d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: voltage sensor no longer critical (voltage sensor %d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: voltage sensor no longer critical (voltage sensor %d)
SAF-TE Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: voltage sensor no longer critical (voltage sensor %d)
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: %s failure detected
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: %s threshold status critical
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: current sensor failure detected (sensor %d)
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: current sensor low threshold exceeded (sensor %d)
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: current sensor low threshold exceeded (sensor %d)
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: current sensor not present or failure detected (sensor %d)
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: current sensor state changed to critical (sensor %d)
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Fan %d cooling fan Failure Detected
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Fan %d cooling fan high speed threshold detected (%d RPM)
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Fan %d cooling fan high threshold detected (%d RPM)
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Fan %d cooling fan low speed threshold detected (%d RPM)
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Fan %d cooling fan low speed threshold detected (%d RPM)
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Fan %d cooling fan not present or failure detected
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Fan %d coolng fan state changed to critical
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: high temperature threshold exceeded (T%d = %6.2f%c)
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: high temperature threshold exceeded (T%d = %6.2f%c)
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: low temperature threshold exceeded (T%d = %6.2f%c)
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: low temperature threshold exceeded (T%d = %6.2f%c)
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply AC failure detected
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d Power Supply AC is OK
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply DC failure detected
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply DC is OK
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply failure detected
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply high voltage threshold exceeded (%5.2fV)
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply high voltage threshold exceeded (%5.2fV)
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply low voltage threshold exceeded (%5.2fV)
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply low voltage threshold exceeded (%5.2fV)
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: PS %d power supply state changed to critical
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: temperature sensor failure detected (T#%d)
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: temperature sensor not installed or failure detected (T#%d)
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: temperature sensor state changed to critical (T#%d)
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d AC line failure condition ended
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d AC line failure detected
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d battery failure condition ended
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d battery failure detected
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d DC line failure condition ended
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d DC line failure detected
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d general failure detected
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: UPS %d state change critical
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Voltage Sensor %d low threshold Detected (%d RPM)
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: Voltage Sensor %d low threshold Detected (%d RPM)
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: voltage sensor failure detected (sensor %d)
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: voltage sensor high voltage threshold exceeded (sensor %d) (%d RPM)
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: voltage sensor high voltage threshold exceeded (sensor %d) (%d RPM)
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: voltage sensor not present or failure detected (sensor %d)
SES Device on StorEdge Array SN#%s CH%d ID%d: ALERT: voltage sensor state changed to critical (sensor %d)
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: %s Back Online
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: %s threshold status back to normal
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: current sensor is no longer critical (sensor %d)
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: current sensor is OK (sensor %d)
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: current sensor state is no longer critical (sensor %d)
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: Fan %d cooling fan is no longer in critical state
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: Fan %d cooling fan is now operational
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: Fan %d cooling fan now above low speed threshold
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: Fan %d cooling fan now below high speed threshold
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: PS %d power supply is no longer critical
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: PS %d power supply is OK
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: PS %d power supply voltage now within acceptable limits
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: PS %d power supply voltage now within acceptable limits
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: temperature no longer below low threshold (T#%d)
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: temperature sensor now below high threshold (T#%d)
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: temperature sensor now online (T#%d)
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: temperature sensor state changed is no longer critical (T#%d)
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: UPS %d general failure condition ended
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: UPS %d state change notification
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: Voltage Sensor %d low threshold Critical Ended
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: voltage sensor is OK (sensor %d)
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: voltage sensor now within acceptable limits (sensor %d)
SES Device on StorEdge Array SN#%s CH%d ID%d: NOTICE: voltage sensor now within acceptable limits (sensor %d)
StorEdge Array SN#%s CH%d ID%d LUN %d: ALERT: parity error detected
StorEdge Array SN#%s CH%d ID%d LUN %d: ALERT: re-select timeout
StorEdge Array SN#%s CH%d ID%d LUN %d: NOTICE: clear/abort-queue/abort-tag message received
StorEdge Array SN#%s CH%d ID%d LUN %d: NOTICE: SCSI bus device reset
StorEdge Array SN#%s CH%d ID%d LUN %d: NOTICE: SCSI bus reset
StorEdge Array SN#%s CH%d ID%d: ALERT: redundant path failure detected (CH%d ID%d)
StorEdge Array SN#%s CH%d ID%d: NOTICE: redundant path restored (CH%d ID%d)
StorEdge Array SN#%s CH%d ID%d: SCSI Drive ALERT: aborted command
StorEdge Array SN#%s CH%d ID%d: SCSI Drive ALERT: bad block encountered (%.2Xh, %.2Xh,%.2X/%.2X)
StorEdge Array SN#%s CH%d ID%d: SCSI Drive ALERT: block reassignment failed
StorEdge Array SN#%s CH%d ID%d: SCSI Drive ALERT: block successfully reassigned
StorEdge Array SN#%s CH%d ID%d: SCSI Drive ALERT: data overrun/underrun detected
StorEdge Array SN#%s CH%d ID%d: SCSI Drive ALERT: drive hardware error (%.2Xh, %.2Xh,%.2X/%.2X)
StorEdge Array SN#%s CH%d ID%d: SCSI Drive ALERT: unexpected sense received (%.2Xh, %.2Xh,%.2X/%.2X)
StorEdge Array SN#%s CH%d ID%d: SCSI Drive NOTICE: scan SCSI drive successful
StorEdge Array SN#%s CH%d ID%d: SCSI Target ALERT: gross error on scsi bus detected
StorEdge Array SN#%s CH%d ID%d: SCSI Target ALERT: invalid status/sense data received (%.2Xh, %.2Xh,%.2X/%.2X)
StorEdge Array SN#%s CH%d ID%d: SCSI Target ALERT: negotiation error detected
StorEdge Array SN#%s CH%d ID%d: SCSI Target ALERT: SCSI parity/CRC error detected
StorEdge Array SN#%s CH%d ID%d: SCSI Target ALERT: timeout waiting for io to complete
StorEdge Array SN#%s CH%d ID%d: SCSI Target ALERT: unexpected disconnection encountered
StorEdge Array SN#%s CH%d ID%d: SCSI Target ALERT: unexpected drive not ready (%.2Xh, %.2Xh,%.2X/%.2X)
StorEdge Array SN#%s CH%d ID%d: SCSI Target ALERT: unexpected select timeout
StorEdge Array SN#%s CH%d ID%d: SCSI Target ALERT: unit attention received (%.2Xh, %.2Xh,%.2X/%.2X)
StorEdge Array SN#%s CH%d: ALERT: fibre channel loop connection failure detected (ALT CH%d)
StorEdge Array SN#%s CH%d: ALERT: redundant loop connection error detected
StorEdge Array SN#%s CH%d: ALERT: redundant loop failure detected (ALT Surviving CH%d)
StorEdge Array SN#%s CH%d: ALERT: redundant path expected but not found (CH%d ID%d)
StorEdge Array SN#%s CH%d: NOTICE: fibre channel loop connection restored
StorEdge Array SN#%s CH%d: SCSI Drive Channel ALERT: SCSI bus reset issued
StorEdge Array SN#%s CH%d: SCSI Drive Channel ALERT: SCSI channel failure
StorEdge Array SN#%s CH%d: SCSI Drive Channel NOTICE: SCSI bus reset issued
StorEdge Array SN#%s Controller ALERT: DRAM Parity Error Detected
StorEdge Array SN#%s Controller ALERT: pci bus 2 parity error
StorEdge Array SN#%s Controller ALERT: pci bus 3 parity error
StorEdge Array SN#%s Controller ALERT: power supply unstable
StorEdge Array SN#%s Controller ALERT: redundant controller failure detected
StorEdge Array SN#%s Controller NOTICE: controller initialization completed
StorEdge Array SN#%s Controller NOTICE: controller reset
StorEdge Array SN#%s Controller NOTICE: memory is now sufficient to fully support current configuration
StorEdge Array SN#%s Controller NOTICE: NVRAM factory defaults restored
StorEdge Array SN#%s Controller WARNING: memory not sufficient to fully support current configuration
StorEdge Array SN#%s Peripheral Device ALERT: %s %s threshold exceeded (%6.2f%c)
StorEdge Array SN#%s Peripheral Device ALERT: +%sV %s threshold exceeded (%5.2fV)
StorEdge Array SN#%s Peripheral Device ALERT: battery board failure detected
StorEdge Array SN#%s Peripheral Device ALERT: battery board not fully charged
StorEdge Array SN#%s Peripheral Device ALERT: battery board not installed
StorEdge Array SN#%s Peripheral Device ALERT: cooling fan failure detected
StorEdge Array SN#%s Peripheral Device ALERT: cooling fan not installed
StorEdge Array SN#%s Peripheral Device ALERT: cooling fan not installed or failure detected
StorEdge Array SN#%s Peripheral Device ALERT: elevated temperature alert
StorEdge Array SN#%s Peripheral Device ALERT: Fan %d %s threshold exceeded(%d RPM)
StorEdge Array SN#%s Peripheral Device ALERT: Fan %d fan failure detected
StorEdge Array SN#%s Peripheral Device ALERT: Fan %d fan not present
StorEdge Array SN#%s Peripheral Device ALERT: Fan %d not present or failure detected
StorEdge Array SN#%s Peripheral Device ALERT: power supply failure detected
StorEdge Array SN#%s Peripheral Device ALERT: primary battery board failure detected
StorEdge Array SN#%s Peripheral Device ALERT: primary battery board not fully charged
StorEdge Array SN#%s Peripheral Device ALERT: primary battery board not installed
StorEdge Array SN#%s Peripheral Device ALERT: secondary battery board failure detected
StorEdge Array SN#%s Peripheral Device ALERT: secondary battery board not fully charged
StorEdge Array SN#%s Peripheral Device ALERT: secondary battery board not installed
StorEdge Array SN#%s Peripheral Device NOTICE: %s temperature %s now back to non-critical level (%6.2f%c)
StorEdge Array SN#%s Peripheral Device NOTICE: +%sV %s: voltage now within acceptable limits
StorEdge Array SN#%s Peripheral Device NOTICE: battery board back online
StorEdge Array SN#%s Peripheral Device NOTICE: battery board fully charged
StorEdge Array SN#%s Peripheral Device NOTICE: battery board present
StorEdge Array SN#%s Peripheral Device NOTICE: elevated temperature now back to normal level
StorEdge Array SN#%s Peripheral Device NOTICE: Fan %d now online
StorEdge Array SN#%s Peripheral Device NOTICE: fan now online
StorEdge Array SN#%s Peripheral Device NOTICE: primary battery board back online
StorEdge Array SN#%s Peripheral Device NOTICE: primary battery board fully charged
StorEdge Array SN#%s Peripheral Device NOTICE: primary battery board present
StorEdge Array SN#%s Peripheral Device NOTICE: secondary battery board back online
StorEdge Array SN#%s Peripheral Device NOTICE: secondary battery board fully charged
StorEdge Array SN#%s Peripheral Device NOTICE: secondary battery board present
StorEdge Array SN#%s SMART: CH%d ID%d predictable failure detected

Error Codes

Most of the functionality in the Sun StorEdge CLI is implemented by a library, smlib, which reports success or failure using a status code beginning with "sm_". When a command fails, the CLI typically reports the operation that was in progress, the word "error," and an smlib status code. For example:

sccli: failed to set parameter: error: sm_err_illegal_request

The following table lists the smlib error codes and their descriptions.


Status Code	Description
Normal (good) status codes
sm_ok	good status
sm_being_init	logical drive initializing
sm_being_rebuid	logical drive is rebuilding
File access errors
sm_error_open_device	Open inband/outband device error.
sm_error_close_device	Close inband/outband device error.
sm_error_open_file	open file failure
sm_error_close_file	close file failure
Agent error or socket errors
sm_err_bad_socket	cannot get a socket
sm_err_bad_connection	unable to connect to Primary Agent
sm_err_ift_agent_not_found	no IFT Primary Agent found
sm_err_network_busy	network traffic
Controller access errors
sm_err_ctrl_access	access error to controller
sm_err_ctrl_busy	controller busy
sm_err_ctrl_not_ready	controller not ready
sm_err_not_primary_ctrl	not a primary controller
sm_err_no_valid_data	no valid returned from controller
Monitoring errors
sm_err_bad_event_data	not a valid data for event
sm_err_clear_event_failure	clear events failure
sm_err_get_event_failure	get events failure
Configuration error
sm_err_bad_parameter	bad parameter found to configure raid
sm_err_bad_raid_data	bad data returned from controller
sm_err_illegal_request	illegal request to controller
sm_err_invalid_request	invalid LUN mapping request
sm_err_invalid_command	invalid CLI command
Upload/download error
sm_err_target_not_ready	target device not ready
sm_err_target_not_found	target device not found
sm_err_transfer_timeout	data transfer timed out
sm_err_bad_status_returned	bad status returned while download
sm_err_no_firmware_data	no firmware data for download
sm_err_bad_firmware_data	bad firmware data for download
sm_err_no_model_specified	SCSI device model name missing
sm_err_fw_download_failed	firmware download failed
sm_err_fw_download_not_performed	firmware download not performed
sm_err_set_wdt_jbod_failed	set SES wdt failed on JBOD
sm_err_get_wdt_status_jbod_failed	get ses wdt status JBOD failed
sm_err_engage_failure	controller fw download ok but engage fw failed
sm_err_ctrl_download_ok_but_no_engage_request	after ctrl fw download but ctrl does not request engage
sm_err_nvram_download_failure	failed to download NVRAM data to controller
sm_err_nvram_upload_failure	failed to upload NVRAM from controller to a host file
Device errors
sm_err_not_supported	device not supported
sm_err_not_dev_on_primary_ctrl	user-specified device path does not correspond to a LUN mapped to the primary controller--this path cannot be used for administrative functions.
sm_err_excluded_path	specified device file is not usable due to SANpath LUN masking
Lib database error
sm_err_database_not_valid	lib database data is not valid
sm_err_database_bad_lg_id	bad lg ID returned from database
sm_err_database_bad_lg_idx	bad lg index returned from database
sm_err_database_bad_lv_id	bad lv ID returned from database
sm_err_database_bad_lv_idx	bad lv index returned from database
sm_err_database_bad_log_drvchl	bad log drv chl
sm_err_database_bad_log_hostch	bad log host chl
sm_err_database_bad_phys_chl	bad physical channel
sm_err_database_update	error on database update
Misc error
sm_err_out_of_resource	out of resources (cannot allocate memory)
sm_err_bad_parameters	bad parameters in command
sm_err_shutdown_ctrl_failure	shutdown controller failed
sm_err_get_ctrl_boot_time_failure	failed to get controller boot time
Controller parameters
sm_err_get_controller_name	cannot get controller name parameter
sm_err_set_controller_name	cannot set controller name
sm_err_set_controller_unique_id	error setting controller unique ID
sm_err_get_controller_unique_id	cannot retrieve controller unique ID
sm_err_get_rs232_config	cannot retrieve rs232 configuration info
sm_err_set_rs232_config	cannot set rs232 parameters
sm_err_mute_controller_beep	failed to mute controller
sm_err_get_write_policy	failed to retrieve write-policy
sm_err_set_write_policy	failed to set write policy
sm_err_show_drive_side_param	failed to retrieve drive-side parameters
sm_err_set_drive_side_param	failed to set drive-side parameters
sm_err_show_host_side_param	failed to retrieve host-side parameters
sm_err_set_host_side_param	failed to set host-side parameters
sm_err_get_ctrl_net_interface	failed to retrieve network parameters
sm_err_no_ctrl_net_interface	device has no network interface
sm_err_set_ctrl_net_interface	failed to set drive-side parameters
sm_err_check_or_set_password	failed to check or set controller password
sm_err_get_ctrl_redundant_mode	failed to retrieve drive-side parameters
sm_err_set_cache_param	failed to set drive-side parameters
sm_err_get_cache_param	failed to retrieve drive-side parameters
Physical disk, logical drive, logical volume
sm_err_create_logical_drive_disk_not_available	A specified disk drive is already in use
sm_err_create_logical_volume	could not create logical volume
sm_err_remove_logical_drive	could not delete logical drive
sm_err_remove_logical_volume	could not delete logical volume
sm_err_partition_logical_volume	could not modify lv partitions
sm_err_map_logical_volume	could not map lv to host channel
sm_err_write_params	could not write configuration data to controller
sm_err_reset_timeout	reset-controller operation timed out
sm_err_comp_scsidrv	SCSI drive does not match selection criteria
sm_err_get_ld_partition	could not retrieve ld partition map
sm_err_assign_logical_drive	could not assign ld to host channel
sm_err_show_logical_volumes	could not retrieve logical volume info
sm_err_delete_logical_volume	could not delete logical volume
sm_err_partition_ld_lv	failed to set partition table on ld or lv
sm_err_get_logical_drive_status	failed to get logical drive status
sm_err_map_logical_volume_filter	failed to restore lv LUN filters
sm_err_convert_logical_volume	failed to map lv number to lv ID
sm_err_config_file_format	invalid configuration file format
sm_being_init	logical drive is initializing
sm_being_rebuid	logical drive is rebuilding
SCSI channel
sm_err_get_channel_data	failed to get SCSI channel parameters
sm_err_set_channel_data	failed to set SCSI channel parameters
Host LUN mappings
sm_err_map_partition_to_host_channel	failed to retrieve host channel mappings
sm_err_unmap_partition_from_host_channel	failed to unmap partition from host channel
Read/write configuration file
sm_err_upload_raid_config	get RAID configuration error
sm_err_download_raid_config	set RAID configuration error
sm_err_upload_raid_config_get_params_failure	failed to get ctrl param in upload_raid_config
sm_err_upload_raid_config_get_lun_failure	failed to get LUN map in upload_raid_config
sm_err_upload_raid_config_get_ld_lv_info_failure	failed to get ld and lv info in upload_raid_config
sm_err_upload_raid_config_get_scsi_drv_failure	failed to get SCSI drv info in upload_raid_config
sm_err_upload_raid_config_get_fru_failure	failed to get FRU ID in upload_raid_Config
sm_err_write_raid_config	save RAID configuration to file error
sm_err_read_raid_config	get RAID configuration from file error
sm_writing_download_raid_config	writing_download_raid_config
Link diag errors
sm_err_get_channel_statistics	get channel statistics error
sm_err_set_channel_statistics	set/reset channel statistics error
sm_err_get_controller_statistics	get controller statistics error
sm_err_set_controller_statistics	set/reset controller statistics error
sm_err_get_host_statistics	get host statistics error
sm_err_set_host_statistics	set/reset host statistics error
sm_err_get_drive_statistics	get drive statistics error
sm_err_set_drive_statistics	set/reset drive statistics error
sm_err_get_caching_statistics	get caching statistics error
sm_err_set_caching_statistics	set/reset caching statistics error
sm_err_set_all_statistics
sm_err_io_chl_diag_failure	I/O chl diagnostic command failed
sm_err_io_chl_diag_busy	I/O chl diagnostic command busy
sm_err_io_chl_diag_parameter_error	I/O chl diagnostic command parameter error
sm_err_io_chl_diag_bad_target	I/O chl diagnostic command bad target parameters
sm_err_io_chl_diag_cmdnotrun	I/O chl diagnostic command not running
sm_err_io_chl_diag_no_resource	I/O chl diagnostic command out of resource
sm_err_io_chl_diag_toomuchops	I/O chl diagnostic command too much ops running
sm_err_io_chl_diag_not_ready	I/O chl diagnostic command not ready
sm_stat_io_chl_diag_in_progress	I/O chl diagnostic command in progress
sm_stat_io_chl_diag_complete_noerr	I/O chl diagnostic command completed with no error
sm_stat_io_chl_diag_complete_err	I/O chl diagnostic command completed with errors
sm_stat_io_chl_diag_aborted_user	I/O chl diagnostic command aborted by user
sm_err_get_ctrl_cfg_string	failed to get controller cfg string in page 1 subpage 8
sm_err_get_ctrl_cfg	failed to get controller cfg (page 1 subpage 1)
sm_err_not_host_channel	specified channel is not a host channel
sm_err_not_drive_channel	specified channel is not a drive channel
sm_err_not_existing_channel	specified channel is not an existing channel
sm_err_not_qualifying_channel	specified channel is not a qualifying channel
sm_err_not_existing_target	specified target is not an existing target
sm_err_not_valid_target	specified target is not a valid target
SAF-TE/SES
sm_err_not_supported_safte_target	specified target is not a supported SAF-TE target
sm_err_not_supported_ses_target	specified target is not a supported SES target
sm_err_scan_ses_failure	failed to scan SES target
sm_err_scan_safte_failure	failed to scan SAF-TE target
sm_err_bad_config_sespage	bad SES configuration page
sm_err_element_type_not_found	element type not found in SES config page
sm_err_element_not_found	specified element not found in SES pages
sm_err_get_ses_page_failed	failed to get SES page
sm_err_send_ses_page_failed	failed to send SES page
sm_err_get_offset_encl_pg	failed to get offset in enclosure page for specified element type
sm_err_parse_config_pg_failed	failed to parse SES configuration page
sm_err_invalid_encl_pg_length	invalid enclosure page length
sm_err_get_pld_rev_failure	failed to get pld rev
sm_err_get_pld_register_failure	failed to get pld register raw data
FRU ID related error
sm_err_bad_fru_id	FRU ID data is bad
sm_err_get_fru_id_failure	get FRU ID failure
sm_scan_fru_done_some_missing	scanning FRU is done but at least one FRU missing
sm_err_program_fruid	error in programming the FRU-ID
sm_err_scan_fruid	error in discovering FRU-ID info
sm_err_read_fruid	error in reading FRU-ID info
sm_err_some_fru_missing	expected FRU data not found
Battery
sm_err_battery_type_too_old	battery does not contain service date info
sm_err_set_battery_in_service_failure	could not set battery in-service date
sm_err_set_battery_all_info_failure	could not program battery info
sm_err_get_battery_info_failure	could not retrieve battery info
sm_stat_battery_in_service_date_not_set	battery in-service date is not set
LUN masking
sm_err_get_hostwwn_name_list_failure	could not retrieve host-WWN name list
sm_err_hostwwn_item_exist	attempted to assign duplicate host-WWN name
sm_err_hostwwn_name_too_long	host-WWN name max length exceeded
sm_err_hostwwn_invalid_wwn	host-WWN WWN not valid
sm_err_create_hostwwn_name_failure	could not assign host-WWN name
sm_err_hostwwn_item_not_exist	host-WWN name not assigned
sm_err_delete_hostwwn_name_failure	could not delete host-WWN name assignment
sm_err_restore_hostwwn_name_list_failure	failed to restore host-WWN name list