Tables |
TABLE 1-1 Hardware and Software Requirements
TABLE 1-2 Supported Servers and Operating Systems
TABLE 1-3 Zip Files Available at the Sun Download Center
TABLE 1-4 VLAN Based Security
TABLE 2-1 Blade and Power Supply Status Codes
TABLE 2-2 10/100/1000BASE-T Data Network Port Pinouts
TABLE 2-3 Serial Port Pinouts
TABLE 4-1 user Commands
TABLE 4-2 Parameter Description for User Access
TABLE 4-3 Parameters for Setting the IP Address
TABLE 4-4 Parameters for Sending a ping Request
TABLE 4-5 Parameters and Variables for Setting Up a Server for Monitoring
TABLE 4-6 Parameters for Setting Up Application Monitoring
TABLE 4-7 Parameters for Configuring Application Monitoring
TABLE 4-8 Parameters for Adding SSL Device Configurations
TABLE 4-9 Parameters for Adding and Removing Port Pairs
TABLE 4-10 Parameters for Adding or Removing an SSL Device Interface
TABLE 4-11 Options for Setting the TCP Parameters
TABLE 4-12 Parameters for Creating a Load Balancing Service
TABLE 4-13 Parameters for Configuring the Subnet Mask for a VIP
TABLE 4-14 Parameters for Adding SSL Devices to a Service
TABLE 4-15 Parameters for Removing SSL Devices from a Service
TABLE 4-16 Parameters for Modifying SSL Devices in a Service
TABLE 4-17 Parameters for Adding a Default Load Balancing Group to a Service
TABLE 4-18 TCP, Parameters for a Service
TABLE 4-19 Service Point Parameters
TABLE 4-20 Service Point Parameters
TABLE 4-21 Parameters for Configuring a Service for Persistence
TABLE 4-22 Parameters for Configuring a Service for Tracking
TABLE 4-23 Parameters for Configuring a Service for Cookie-Based Persistence
TABLE 4-24 Parameters for Enabling or Disabling a Server
TABLE 4-25 Parameters for Creating an IP Load Balancing Rule
TABLE 4-26 Parameters for Creating an HTTP Load Balancing Rule
TABLE 4-27 Parameters for Creating Load Balancing Groups
TABLE 4-28 Parameters for Adding Rules to a Load Balancing Group
TABLE 4-29 Parameters for Adding Servers to a LB Group
TABLE 4-30 Parameters for Removing Servers to a LB Group
TABLE 4-31 Parameters for Setting Servers to Active or Standby
TABLE 4-32 Parameters for Modifying a Load Balancing Group Scheme
TABLE 4-33 Parameters for Modifying a Load Balancing Group Scheme
TABLE 4-34 Parameters for Configuring the Diagnostic and Verbosity Level
TABLE 4-35 Parameters for Configuring the Debug Level for Specific Modules
TABLE 4-36 Module Names to Use for Configuring the Debug Level
TABLE 4-37 Parameters for the dump memory Command
TABLE 4-38 Parameters for the dump module Command
TABLE 4-39 Module Names to Use with the dump module Command
TABLE 4-40 Modules in the NPU Listed by Index
TABLE 4-41 Tasks Listed by Index for the dump module task Command
TABLE 4-42 VxWorks Network Statistics/Tables by Index
TABLE 4-43 Failover Sub-modules by Index
TABLE 4-44 Statistics Listed by Index for the dump module stats Command
TABLE 5-1 List of Configuration Commands
TABLE 6-1 Parameters for the no enable vlan Command
TABLE B-1 Files and Directories to be Compressed and Exported
Copyright © 2004, Sun Microsystems, Inc. All rights reserved.