Sun XVR-100 Graphics Accelerator Installation Guide
|
|
Sun XVR-100 Graphics Accelerator I/O Port Specifications
|
This appendix provides I/O port specifications for the Sun XVR-100 graphics accelerator.
I/O Port Specifications
The external I/O ports are accessible through the I/O connectors on the Sun XVR-100 graphics accelerator back panel (FIGURE A-1).
FIGURE A-1 shows the connector locations on the board back panel.
FIGURE A-1 Sun XVR-100 Graphics Accelerator Back Panel I/O Ports
The Sun XVR-100 graphics accelerator I/O video ports include the HD15 and DVI video ports.
HD15 Video Output Port
FIGURE A-2 and TABLE A-1 shows the Sun XVR-100 graphics accelerator HD15 connector and pinout signals.
The console video output port is the HD15 15-pin connector that connects to the workstation monitor. The HD15 video connector supports DDC2 monitor support and Display Power Management Signaling (DPMS).
FIGURE A-2 Sun XVR-100 Graphics Accelerator HD15 Connector
TABLE A-1 Sun XVR-100 Graphics Accelerator HD15 Connector Pinout
Pin Number
|
Signal
|
1
|
Red analog video
|
2
|
Green analog video
|
3
|
Blue analog video
|
4
|
No Connect
|
5
|
Ground
|
6
|
Ground
|
7
|
Ground
|
8
|
Ground
|
9
|
+5V Supply
|
10
|
Ground
|
11
|
No Connect
|
12
|
Monitor ID1
|
13
|
Horizontal Sync
|
14
|
Vertical Sync
|
15
|
Monitor ID2
|
DVI Video Output Port
FIGURE A-3 and TABLE A-2 shows the Sun XVR-100 graphics accelerator DVI connector and pinout signals. The DVI video output port is a 30-pin connector for a supported workstation monitor. The DVI video port supports both analog and digital resolutions, but cannot be used simultaneously from the individual DVI port.
FIGURE A-3 Sun XVR-100 Graphics Accelerator DVI Connector
TABLE A-2 Sun XVR-100 Graphics Accelerator DVI Video Output Port
Pin
|
Signal
|
1
|
TMDS Data2--
|
2
|
TMDS Data2+
|
3
|
TMDS Data2/4 Shield
|
4
|
No Connect
|
5
|
Ground
|
6
|
DDC clock
|
7
|
DDC data
|
8
|
Analog VSYNC
|
9
|
TMDS Data1--
|
10
|
TMDS Data1 +
|
11
|
TMDS Data1/3 Shield
|
12
|
No Connect
|
13
|
No Connect
|
14
|
+5V Power
|
15
|
Ground
|
16
|
Hot Plug Detect
|
17
|
TMDS Data0--
|
18
|
TMDS Data0+
|
19
|
TMDS Data0/5 Shield
|
20
|
No connect
|
21
|
No connect
|
22
|
TMDS Clock Shield
|
23
|
TMDS Clock+
|
24
|
TMDS Clock--
|
C1
|
Analog R
|
C2
|
Analog G
|
C3
|
Analog B
|
C4
|
Analog HSYNC
|
C5
|
Analog GND
|
Sun XVR-100 Graphics Accelerator Installation Guide
|
816-7560-14
|
|
Copyright © 2004, Sun Microsystems, Inc. All rights reserved.