Displaying Disk Information

Before you use a disk, you need to know if it has been initialized and placed under VxVM control. You also need to know if the disk is part of a disk group, because you cannot create volumes on a disk that is not part of a disk group. The vxdisk list command displays device names for all recognized disks, the disk names, the disk group names associated with each disk, and the status of each disk.

To display information on all disks that are known to VxVM, use the following command:

VxVM returns a display similar to the following:

To display details on a particular disk defined to VxVM, use the following command:

Displaying Disk Information with vxdiskadm

Displaying disk information shows you which disks are initialized, to which disk groups they belong, and the disk status. The list command displays device names for all recognized disks, the disk names, the disk group names associated with each disk, and the status of each disk.

To display disk information, use the following procedure:

1. Start the vxdiskadm program, and select list (List disk information) from the main menu.
2. At the following display, enter the address of the disk you want to see, or enter all for a list of all disks:
   List disk information 
   Menu: VolumeManager/Disk/ListDisk 
   VxVM INFO V-5-2-475 Use this menu operation to display a list of disks. You can also choose to list detailed information about the disk at a specific disk device address.
   Enter disk device or "all" [<address>,all,q,?] (default: all) 
   • If you enter all, VxVM displays the device name, disk name, group, and status.
   • If you enter the address of the device for which you want information, complete disk information (including the device name, the type of disk, and information about the public and private areas of the disk) is displayed.

   Once you have examined this information, press Return to return to the main menu.