20 Managing Views, Sequences, and Synonyms

About Views

A view is a logical representation of another table or combination of tables. A view derives its data from the tables on which it is based. These tables are called base tables. Base tables might in turn be actual tables or might be views themselves. All operations performed on a view actually affect the base table of the view. You can use views in almost the same way as tables. You can query, update, insert into, and delete from views, just as you can standard tables.

Views can provide a different representation (such as subsets or supersets) of the data that resides within other tables and views. Views are very powerful because they allow you to tailor the presentation of data to different types of users.

Creating Views

To create a view, you must meet the following requirements:

• To create a view in your schema, you must have the CREATE VIEW privilege. To create a view in another user's schema, you must have the CREATE ANY VIEW system privilege. You can acquire these privileges explicitly or through a role.

• The owner of the view (whether it is you or another user) must have been explicitly granted privileges to access all objects referenced in the view definition. The owner cannot have obtained these privileges through roles. Also, the functionality of the view depends on the privileges of the view owner. For example, if the owner of the view has only the INSERT privilege for Scott's emp table, then the view can be used only to insert new rows into the emp table, not to SELECT, UPDATE, or DELETE rows.

• If the owner of the view intends to grant access to the view to other users, the owner must have received the object privileges to the base objects with the GRANT OPTION or the system privileges with the ADMIN OPTION.

You can create views using the CREATE VIEW statement. Each view is defined by a query that references tables, materialized views, or other views. As with all subqueries, the query that defines a view cannot contain the FOR UPDATE clause.

The following statement creates a view on a subset of data in the emp table:

CREATE VIEW sales_staff AS
      SELECT empno, ename, deptno
      FROM emp
      WHERE deptno = 10
    WITH CHECK OPTION CONSTRAINT sales_staff_cnst;
      

The query that defines the sales_staff view references only rows in department 10. Furthermore, the CHECK OPTION creates the view with the constraint (named sales_staff_cnst) that INSERT and UPDATE statements issued against the view cannot result in rows that the view cannot select. For example, the following INSERT statement successfully inserts a row into the emp table by means of the sales_staff view, which contains all rows with department number 10:

INSERT INTO sales_staff VALUES (7584, 'OSTER', 10);

However, the following INSERT statement returns an error because it attempts to insert a row for department number 30, which cannot be selected using the sales_staff view:

INSERT INTO sales_staff VALUES (7591, 'WILLIAMS', 30);

The view could have been constructed specifying the WITH READ ONLY clause, which prevents any updates, inserts, or deletes from being done to the base table through the view. If no WITH clause is specified, the view, with some restrictions, is inherently updatable.

CREATE VIEW division1_staff AS
      SELECT ename, empno, job, dname
      FROM emp, dept
      WHERE emp.deptno IN (10, 30)
         AND emp.deptno = dept.deptno;

CREATE VIEW dept AS SELECT * FROM scott.dept;

SELECT "DEPTNO", "DNAME", "LOC" FROM scott.dept;

CREATE FORCE VIEW AS ...;

Replacing Views

To replace a view, you must have all of the privileges required to drop and create a view. If the definition of a view must change, the view must be replaced; you cannot use an ALTER VIEW statement to change the definition of a view. You can replace views in the following ways:

• You can drop and re-create the view.

  
  

  Caution: When a view is dropped, all grants of corresponding object privileges are revoked from roles and users. After the view is re-created, privileges must be regranted.

  
  

• You can redefine the view with a CREATE VIEW statement that contains the OR REPLACE clause. The OR REPLACE clause replaces the current definition of a view and preserves the current security authorizations. For example, assume that you created the sales_staff view as shown earlier, and, in addition, you granted several object privileges to roles and other users. However, now you need to redefine the sales_staff view to change the department number specified in the WHERE clause. You can replace the current version of the sales_staff view with the following statement:

  CREATE OR REPLACE VIEW sales_staff AS
       SELECT empno, ename, deptno
       FROM emp
       WHERE deptno = 30
       WITH CHECK OPTION CONSTRAINT sales_staff_cnst;
  
  

Before replacing a view, consider the following effects:

• Replacing a view replaces the view definition in the data dictionary. All underlying objects referenced by the view are not affected.

• If a constraint in the CHECK OPTION was previously defined but not included in the new view definition, the constraint is dropped.

• All views and PL/SQL program units dependent on a replaced view become invalid (not usable). See "Managing Object Dependencies" for more information on how the database manages such dependencies.

Using Views in Queries

To issue a query or an INSERT, UPDATE, or DELETE statement against a view, you must have the SELECT, INSERT, UPDATE, or DELETE object privilege for the view, respectively, either explicitly or through a role.

Views can be queried in the same manner as tables. For example, to query the Division1_staff view, enter a valid SELECT statement that references the view:

SELECT * FROM Division1_staff;

ENAME        EMPNO       JOB             DNAME
------------------------------------------------------
CLARK         7782       MANAGER         ACCOUNTING
KING          7839       PRESIDENT       ACCOUNTING
MILLER        7934       CLERK           ACCOUNTING
ALLEN         7499       SALESMAN        SALES
WARD          7521       SALESMAN        SALES
JAMES         7900       CLERK           SALES
TURNER        7844       SALESMAN        SALES
MARTIN        7654       SALESMAN        SALES
BLAKE         7698       MANAGER         SALES

With some restrictions, rows can be inserted into, updated in, or deleted from a base table using a view. The following statement inserts a new row into the emp table using the sales_staff view:

INSERT INTO sales_staff
    VALUES (7954, 'OSTER', 30);

Restrictions on DML operations for views use the following criteria in the order listed:

1. If a view is defined by a query that contains SET or DISTINCT operators, a GROUP BY clause, or a group function, then rows cannot be inserted into, updated in, or deleted from the base tables using the view.

2. If a view is defined with WITH CHECK OPTION, a row cannot be inserted into, or updated in, the base table (using the view), if the view cannot select the row from the base table.

3. If a NOT NULL column that does not have a DEFAULT clause is omitted from the view, then a row cannot be inserted into the base table using the view.

4. If the view was created by using an expression, such as DECODE(deptno, 10, "SALES", ...), then rows cannot be inserted into or updated in the base table using the view.

The constraint created by WITH CHECK OPTION of the sales_staff view only allows rows that have a department number of 30 to be inserted into, or updated in, the emp table. Alternatively, assume that the sales_staff view is defined by the following statement (that is, excluding the deptno column):

CREATE VIEW sales_staff AS
    SELECT empno, ename
    FROM emp
    WHERE deptno = 10
    WITH CHECK OPTION CONSTRAINT sales_staff_cnst;

Considering this view definition, you can update the empno or ename fields of existing records, but you cannot insert rows into the emp table through the sales_staff view because the view does not let you alter the deptno field. If you had defined a DEFAULT value of 10 on the deptno field, then you could perform inserts.

When a user attempts to reference an invalid view, the database returns an error message to the user:

ORA-04063: view 'view_name' has errors

This error message is returned when a view exists but is unusable due to errors in its query (whether it had errors when originally created or it was created successfully but became unusable later because underlying objects were altered or dropped).

Updating a Join View

An updatable join view (also referred to as a modifiable join view) is a view that contains more than one table in the top-level FROM clause of the SELECT statement, and is not restricted by the WITH READ ONLY clause.

The rules for updatable join views are shown in the following table. Views that meet these criteria are said to be inherently updatable.

There are data dictionary views that indicate whether the columns in a join view are inherently updatable. See "Using the UPDATABLE_ COLUMNS Views" for descriptions of these views.

Examples illustrating the rules for inherently updatable join views, and a discussion of key-preserved tables, are presented in following sections. The examples in these sections work only if you explicitly define the primary and foreign keys in the tables, or define unique indexes. The following statements create the appropriately constrained table definitions for emp and dept.

CREATE TABLE dept (
      deptno        NUMBER(4) PRIMARY KEY,
      dname         VARCHAR2(14),
      loc           VARCHAR2(13));
 
CREATE TABLE emp (
      empno        NUMBER(4) PRIMARY KEY,
      ename        VARCHAR2(10),
      job          VARCHAR2(9),
      mgr          NUMBER(4),
      sal          NUMBER(7,2),
      comm         NUMBER(7,2),
      deptno       NUMBER(2),
      FOREIGN KEY (DEPTNO) REFERENCES DEPT(DEPTNO));

You could also omit the primary and foreign key constraints listed in the preceding example, and create a UNIQUE INDEX on dept (deptno) to make the following examples work.

The following statement created the emp_dept join view which is referenced in the examples:

CREATE VIEW emp_dept AS
      SELECT emp.empno, emp.ename, emp.deptno, emp.sal, dept.dname, dept.loc
      FROM emp, dept
      WHERE emp.deptno = dept.deptno
         AND dept.loc IN ('DALLAS', 'NEW YORK', 'BOSTON');

EMPNO      ENAME      DEPTNO  DNAME          LOC 
---------- ---------- ------- -------------- -----------
      7782 CLARK           10 ACCOUNTING     NEW YORK
      7839 KING            10 ACCOUNTING     NEW YORK
      7934 MILLER          10 ACCOUNTING     NEW YORK
      7369 SMITH           20 RESEARCH       DALLAS
      7876 ADAMS           20 RESEARCH       DALLAS
      7902 FORD            20 RESEARCH       DALLAS
      7788 SCOTT           20 RESEARCH       DALLAS
      7566 JONES           20 RESEARCH       DALLAS
8 rows selected.

UPDATE emp_dept
     SET sal = sal * 1.10 
     WHERE deptno = 10;

UPDATE emp_dept
     SET loc = 'BOSTON'
     WHERE ename = 'SMITH';

UPDATE emp_dept
     SET deptno = 10
     WHERE ename = 'SMITH';

DELETE FROM emp_dept
     WHERE ename = 'SMITH';

CREATE VIEW emp_emp AS
     SELECT e1.ename, e2.empno, e2.deptno
     FROM emp e1, emp e2
     WHERE e1.empno = e2.empno;

CREATE VIEW emp_mgr AS
     SELECT e1.ename, e2.ename mname
     FROM emp e1, emp e2
     WHERE e1.mgr = e2.empno
     WITH CHECK OPTION;

INSERT INTO emp_dept (ename, empno, deptno)
   VALUES ('KURODA', 9010, 40);

INSERT INTO emp_dept (ename, empno, deptno)
   VALUES ('KURODA', 9010, 77);

INSERT INTO emp_dept (empno, ename, loc)
   VALUES (9010, 'KURODA', 'BOSTON');

CREATE VIEW emp_dept_oj1 AS
    SELECT empno, ename, e.deptno, dname, loc
    FROM emp e, dept d
    WHERE e.deptno = d.deptno (+);

SELECT * FROM emp_dept_oj1;

EMPNO   ENAME      DEPTNO  DNAME          LOC         
------- ---------- ------- -------------- -------------
7369    SMITH      40      OPERATIONS     BOSTON       
7499    ALLEN      30      SALES          CHICAGO      
7566    JONES      20      RESEARCH       DALLAS       
7654    MARTIN     30      SALES          CHICAGO      
7698    BLAKE      30      SALES          CHICAGO      
7782    CLARK      10      ACCOUNTING     NEW YORK     
7788    SCOTT      20      RESEARCH       DALLAS       
7839    KING       10      ACCOUNTING     NEW YORK     
7844    TURNER     30      SALES          CHICAGO      
7876    ADAMS      20      RESEARCH       DALLAS       
7900    JAMES      30      SALES          CHICAGO      
7902    FORD       20      RESEARCH       DALLAS       
7934    MILLER     10      ACCOUNTING     NEW YORK     
7521    WARD       30      SALES          CHICAGO      
14 rows selected.

CREATE VIEW emp_dept_oj2 AS
SELECT e.empno, e.ename, e.deptno, d.dname, d.loc
FROM emp e, dept d
WHERE e.deptno (+) = d.deptno;

SELECT * FROM emp_dept_oj2;

EMPNO      ENAME      DEPTNO    DNAME          LOC
---------- ---------- --------- -------------- ----
7782       CLARK      10        ACCOUNTING     NEW YORK
7839       KING       10        ACCOUNTING     NEW YORK
7934       MILLER     10        ACCOUNTING     NEW YORK
7369       SMITH      20        RESEARCH       DALLAS
7876       ADAMS      20        RESEARCH       DALLAS
7902       FORD       20        RESEARCH       DALLAS
7788       SCOTT      20        RESEARCH       DALLAS 
7566       JONES      20        RESEARCH       DALLAS
7499       ALLEN      30        SALES          CHICAGO
7698       BLAKE      30        SALES          CHICAGO
7654       MARTIN     30        SALES          CHICAGO
7900       JAMES      30        SALES          CHICAGO
7844       TURNER     30        SALES          CHICAGO
7521       WARD       30        SALES          CHICAGO
                                OPERATIONS     BOSTON
15 rows selected.

SELECT col1, col2, ... FROM T;

CREATE VIEW emp_v AS
    SELECT empno, ename, deptno
        FROM emp;
CREATE VIEW emp_dept_oj1 AS
    SELECT e.*, Loc, d.dname
        FROM emp_v e, dept d
            WHERE e.deptno = d.deptno (+);

CREATE VIEW emp_v_2 AS
    SELECT empno, ename, deptno
        FROM emp
            WHERE sal > 1000;

SELECT owner, table_name, column_name, updatable FROM USER_UPDATABLE_COLUMNS 
     WHERE TABLE_NAME = 'EMP_DEPT_VIEW';

OWNER       TABLE_NAME      COLUMN_NAM      UPD
----------  ----------      ----------      ---
SCOTT       EMP_DEPT_V      EMPNO           NO
SCOTT       EMP_DEPT_V      ENAME           NO
SCOTT       EMP_DEPT_V      DEPTNO          NO
SCOTT       EMP_DEPT_V      DNAME           NO
SCOTT       EMP_DEPT_V      LOC             NO
5 rows selected.

SELECT COLUMN_NAME, UPDATABLE
      FROM USER_UPDATABLE_COLUMNS
      WHERE TABLE_NAME = 'EMP_DEPT';

COLUMN_NAME                    UPD
------------------------------ ---
EMPNO                          YES
ENAME                          YES
DEPTNO                         YES
SAL                            YES
DNAME                          NO
LOC                            NO

6 rows selected.

Altering Views

You use the ALTER VIEW statement only to explicitly recompile a view that is invalid. If you want to change the definition of a view, see "Replacing Views".

The ALTER VIEW statement lets you locate recompilation errors before run time. To ensure that the alteration does not affect the view or other objects that depend on it, you can explicitly recompile a view after altering one of its base tables.

To use the ALTER VIEW statement, the view must be in your schema, or you must have the ALTER ANY TABLE system privilege.

Dropping Views

You can drop any view contained in your schema. To drop a view in another user's schema, you must have the DROP ANY VIEW system privilege. Drop a view using the DROP VIEW statement. For example, the following statement drops the emp_dept view:

DROP VIEW emp_dept;

About Sequences

Sequences are database objects from which multiple users can generate unique integers. The sequence generator generates sequential numbers, which can help to generate unique primary keys automatically, and to coordinate keys across multiple rows or tables.

Without sequences, sequential values can only be produced programmatically. A new primary key value can be obtained by selecting the most recently produced value and incrementing it. This method requires a lock during the transaction and causes multiple users to wait for the next value of the primary key; this waiting is known as serialization. If developers have such constructs in applications, then you should encourage the developers to replace them with access to sequences. Sequences eliminate serialization and improve the concurrency of an application.

Creating Sequences

To create a sequence in your schema, you must have the CREATE SEQUENCE system privilege. To create a sequence in another user's schema, you must have the CREATE ANY SEQUENCE privilege.

Create a sequence using the CREATE SEQUENCE statement. For example, the following statement creates a sequence used to generate employee numbers for the empno column of the emp table:

CREATE SEQUENCE emp_sequence
      INCREMENT BY 1
      START WITH 1
      NOMAXVALUE
      NOCYCLE
      CACHE 10;

Notice that several parameters can be specified to control the function of sequences. You can use these parameters to indicate whether the sequence is ascending or descending, the starting point of the sequence, the minimum and maximum values, and the interval between sequence values. The NOCYCLE option indicates that the sequence cannot generate more values after reaching its maximum or minimum value.

The CACHE clause preallocates a set of sequence numbers and keeps them in memory so that sequence numbers can be accessed faster. When the last of the sequence numbers in the cache has been used, the database reads another set of numbers into the cache.

The database might skip sequence numbers if you choose to cache a set of sequence numbers. For example, when an instance abnormally shuts down (for example, when an instance failure occurs or a SHUTDOWN ABORT statement is issued), sequence numbers that have been cached but not used are lost. Also, sequence numbers that have been used but not saved are lost as well. The database might also skip cached sequence numbers after an export and import. See Oracle Database Utilities for details.

Altering Sequences

To alter a sequence, your schema must contain the sequence, or you must have the ALTER ANY SEQUENCE system privilege. You can alter a sequence to change any of the parameters that define how it generates sequence numbers except the sequence starting number. To change the starting point of a sequence, drop the sequence and then re-create it.

Alter a sequence using the ALTER SEQUENCE statement. For example, the following statement alters the emp_sequence:

ALTER SEQUENCE emp_sequence
    INCREMENT BY 10
    MAXVALUE 10000
    CYCLE
    CACHE 20;

Using Sequences

To use a sequence, your schema must contain the sequence or you must have been granted the SELECT object privilege for another user's sequence. Once a sequence is defined, it can be accessed and incremented by multiple users (who have SELECT object privilege for the sequence containing the sequence) with no waiting. The database does not wait for a transaction that has incremented a sequence to complete before that sequence can be incremented again.

The examples outlined in the following sections show how sequences can be used in master/detail table relationships. Assume an order entry system is partially comprised of two tables, orders_tab (master table) and line_items_tab (detail table), that hold information about customer orders. A sequence named order_seq is defined by the following statement:

CREATE SEQUENCE Order_seq
    START WITH 1
    INCREMENT BY 1
    NOMAXVALUE
    NOCYCLE
    CACHE 20;

INSERT INTO Orders_tab (Orderno, Custno)
    VALUES (Order_seq.NEXTVAL, 1032);

UPDATE Orders_tab
    SET Orderno = Order_seq.NEXTVAL
    WHERE Orderno = 10112;

SELECT Order_seq.NEXTVAL FROM dual;

INSERT INTO Line_items_tab (Orderno, Partno, Quantity)
    VALUES (Order_seq.CURRVAL, 20321, 3);

INSERT INTO Line_items_tab (Orderno, Partno, Quantity)
    VALUES (Order_seq.CURRVAL, 29374, 1);

CREATE SEQUENCE seq2
    CACHE 50;

CREATE SEQUENCE seq3
    NOCACHE;

Dropping Sequences

You can drop any sequence in your schema. To drop a sequence in another schema, you must have the DROP ANY SEQUENCE system privilege. If a sequence is no longer required, you can drop the sequence using the DROP SEQUENCE statement. For example, the following statement drops the order_seq sequence:

DROP SEQUENCE order_seq;

When a sequence is dropped, its definition is removed from the data dictionary. Any synonyms for the sequence remain, but return an error when referenced.

About Synonyms

A synonym is an alias for a schema object. Synonyms can provide a level of security by masking the name and owner of an object and by providing location transparency for remote objects of a distributed database. Also, they are convenient to use and reduce the complexity of SQL statements for database users.

Synonyms allow underlying objects to be renamed or moved, where only the synonym needs to be redefined and applications based on the synonym continue to function without modification.

You can create both public and private synonyms. A public synonym is owned by the special user group named PUBLIC and is accessible to every user in a database. A private synonym is contained in the schema of a specific user and available only to the user and the user's grantees.

Creating Synonyms

To create a private synonym in your own schema, you must have the CREATE SYNONYM privilege. To create a private synonym in another user's schema, you must have the CREATE ANY SYNONYM privilege. To create a public synonym, you must have the CREATE PUBLIC SYNONYM system privilege.

Create a synonym using the CREATE SYNONYM statement. The underlying schema object need not exist, nor do you need privileges to access the object. The following statement creates a public synonym named public_emp on the emp table contained in the schema of jward:

CREATE PUBLIC SYNONYM public_emp FOR jward.emp

When you create a synonym for a remote procedure or function, you must qualify the remote object with its schema name. Alternatively, you can create a local public synonym on the database where the remote object resides, in which case the database link must be included in all subsequent calls to the procedure or function.

Using Synonyms in DML Statements

You can successfully use any private synonym contained in your schema or any public synonym, assuming that you have the necessary privileges to access the underlying object, either explicitly, from an enabled role, or from PUBLIC. You can also reference any private synonym contained in another schema if you have been granted the necessary object privileges for the private synonym.

You can only reference another user's synonym using the object privileges that you have been granted. For example, if you have the SELECT privilege for the jward.emp synonym, then you can query the jward.emp synonym, but you cannot insert rows using the jward.emp synonym.

A synonym can be referenced in a DML statement the same way that the underlying object of the synonym can be referenced. For example, if a synonym named emp refers to a table or view, then the following statement is valid:

INSERT INTO emp (empno, ename, job)
    VALUES (emp_sequence.NEXTVAL, 'SMITH', 'CLERK');

If the synonym named fire_emp refers to a standalone procedure or package procedure, then you could execute it with the command

EXECUTE Fire_emp(7344);

Dropping Synonyms

You can drop any private synonym in your own schema. To drop a private synonym in another user's schema, you must have the DROP ANY SYNONYM system privilege. To drop a public synonym, you must have the DROP PUBLIC SYNONYM system privilege.

Drop a synonym that is no longer required using DROP SYNONYM statement. To drop a private synonym, omit the PUBLIC keyword. To drop a public synonym, include the PUBLIC keyword.

For example, the following statement drops the private synonym named emp:

DROP SYNONYM emp;

The following statement drops the public synonym named public_emp:

DROP PUBLIC SYNONYM public_emp;

When you drop a synonym, its definition is removed from the data dictionary. All objects that reference a dropped synonym remain. However, they become invalid (not usable). For more information about how dropping synonyms can affect other schema objects, see "Managing Object Dependencies".