13 Managing Schema Objects

Using DBMS_STATS to Collect Table and Index Statistics

You can use the DBMS_STATS package or the ANALYZE statement to gather statistics about the physical storage characteristics of a table, index, or cluster. These statistics are stored in the data dictionary and can be used by the optimizer to choose the most efficient execution plan for SQL statements accessing analyzed objects.

Oracle recommends using the more versatile DBMS_STATS package for gathering optimizer statistics, but you must use the ANALYZE statement to collect statistics unrelated to the optimizer, such as empty blocks, average space, and so forth.

The DBMS_STATS package allows both the gathering of statistics, including utilizing parallel execution, and the external manipulation of statistics. Statistics can be stored in tables outside of the data dictionary, where they can be manipulated without affecting the optimizer. Statistics can be copied between databases or backup copies can be made.

The following DBMS_STATS procedures enable the gathering of optimizer statistics:

• GATHER_INDEX_STATS

• GATHER_TABLE_STATS

• GATHER_SCHEMA_STATS

• GATHER_DATABASE_STATS

  
  

  See Also: Oracle Database Performance Tuning Guide for information about using DBMS_STATS to gather statistics for the optimizer PL/SQL Packages and Types Reference for a description of the DBMS_STATS package

  
  

Validating Tables, Indexes, Clusters, and Materialized Views

To verify the integrity of the structure of a table, index, cluster, or materialized view, use the ANALYZE statement with the VALIDATE STRUCTURE option. If the structure is valid, no error is returned. However, if the structure is corrupt, you receive an error message.

For example, in rare cases such as hardware or other system failures, an index can become corrupted and not perform correctly. When validating the index, you can confirm that every entry in the index points to the correct row of the associated table. If the index is corrupt, you can drop and re-create it.

If a table, index, or cluster is corrupt, you should drop it and re-create it. If a materialized view is corrupt, perform a complete refresh and ensure that you have remedied the problem. If the problem is not corrected, drop and re-create the materialized view.

The following statement analyzes the emp table:

ANALYZE TABLE emp VALIDATE STRUCTURE;

You can validate an object and all related objects (for example, indexes) by including the CASCADE option. The following statement validates the emp table and all associated indexes:

ANALYZE TABLE emp VALIDATE STRUCTURE CASCADE;

You can specify that you want to perform structure validation online while DML is occurring against the object being validated. There can be a slight performance impact when validating with ongoing DML affecting the object, but this is offset by the flexibility of being able to perform ANALYZE online. The following statement validates the emp table and all associated indexes online:

ANALYZE TABLE emp VALIDATE STRUCTURE CASCADE ONLINE;

Listing Chained Rows of Tables and Clusters

You can look at the chained and migrated rows of a table or cluster using the ANALYZE statement with the LIST CHAINED ROWS clause. The results of this statement are stored in a specified table created explicitly to accept the information returned by the LIST CHAINED ROWS clause. These results are useful in determining whether you have enough room for updates to rows.

ANALYZE CLUSTER emp_dept LIST CHAINED ROWS INTO CHAINED_ROWS;

Using DELETE

You can delete the rows of a table using the DELETE statement. For example, the following statement deletes all rows from the emp table:

DELETE FROM emp;

If there are many rows present in a table or cluster when using the DELETE statement, significant system resources are consumed as the rows are deleted. For example, CPU time, redo log space, and undo segment space from the table and any associated indexes require resources. Also, as each row is deleted, triggers can be fired. The space previously allocated to the resulting empty table or cluster remains associated with that object. With DELETE you can choose which rows to delete, whereas TRUNCATE and DROP affect the entire object.

Using DROP and CREATE

You can drop a table and then re-create the table. For example, the following statements drop and then re-create the emp table:

DROP TABLE emp;
CREATE TABLE emp ( ... );

When dropping and re-creating a table or cluster, all associated indexes, integrity constraints, and triggers are also dropped, and all objects that depend on the dropped table or clustered table are invalidated. Also, all grants for the dropped table or clustered table are dropped.

Using TRUNCATE

You can delete all rows of the table using the TRUNCATE statement. For example, the following statement truncates the emp table:

TRUNCATE TABLE emp;

Using the TRUNCATE statement provides a fast, efficient method for deleting all rows from a table or cluster. A TRUNCATE statement does not generate any undo information and it commits immediately. It is a DDL statement and cannot be rolled back. A TRUNCATE statement does not affect any structures associated with the table being truncated (constraints and triggers) or authorizations. A TRUNCATE statement also specifies whether space currently allocated for the table is returned to the containing tablespace after truncation.

You can truncate any table or cluster in your own schema. Any user who has the DROP ANY TABLE system privilege can truncate a table or cluster in any schema.

Before truncating a table or clustered table containing a parent key, all referencing foreign keys in different tables must be disabled. A self-referential constraint does not have to be disabled.

As a TRUNCATE statement deletes rows from a table, triggers associated with the table are not fired. Also, a TRUNCATE statement does not generate any audit information corresponding to DELETE statements if auditing is enabled. Instead, a single audit record is generated for the TRUNCATE statement being issued. See the Oracle Database Security Guide for information about auditing.

A hash cluster cannot be truncated, nor can tables within a hash or index cluster be individually truncated. Truncation of an index cluster deletes all rows from all tables in the cluster. If all the rows must be deleted from an individual clustered table, use the DELETE statement or drop and re-create the table.

The REUSE STORAGE or DROP STORAGE options of the TRUNCATE statement control whether space currently allocated for a table or cluster is returned to the containing tablespace after truncation. The default option, DROP STORAGE, reduces the number of extents allocated to the resulting table to the original setting for MINEXTENTS. Freed extents are then returned to the system and can be used by other objects.

Alternatively, the REUSE STORAGE option specifies that all space currently allocated for the table or cluster remains allocated to it. For example, the following statement truncates the emp_dept cluster, leaving all extents previously allocated for the cluster available for subsequent inserts and deletes:

TRUNCATE CLUSTER emp_dept REUSE STORAGE;

The REUSE or DROP STORAGE option also applies to any associated indexes. When a table or cluster is truncated, all associated indexes are also truncated. The storage parameters for a truncated table, cluster, or associated indexes are not changed as a result of the truncation.

Enabling Triggers

You enable a disabled trigger using the ALTER TRIGGER statement with the ENABLE option. To enable the disabled trigger named reorder on the inventory table, enter the following statement:

ALTER TRIGGER reorder ENABLE;

To enable all triggers defined for a specific table, use the ALTER TABLE statement with the ENABLE ALL TRIGGERS option. To enable all triggers defined for the INVENTORY table, enter the following statement:

ALTER TABLE inventory
    ENABLE ALL TRIGGERS;

Disabling Triggers

Consider temporarily disabling a trigger if one of the following conditions is true:

• An object that the trigger references is not available.

• You must perform a large data load and want it to proceed quickly without firing triggers.

• You are loading data into the table to which the trigger applies.

You disable a trigger using the ALTER TRIGGER statement with the DISABLE option. To disable the trigger reorder on the inventory table, enter the following statement:

ALTER TRIGGER reorder DISABLE;

You can disable all triggers associated with a table at the same time using the ALTER TABLE statement with the DISABLE ALL TRIGGERS option. For example, to disable all triggers defined for the inventory table, enter the following statement:

ALTER TABLE inventory
    DISABLE ALL TRIGGERS;

Integrity Constraint States

You can specify that a constraint is enabled (ENABLE) or disabled (DISABLE). If a constraint is enabled, data is checked as it is entered or updated in the database, and data that does not conform to the constraint is prevented from being entered. If a constraint is disabled, then data that does not conform can be allowed to enter the database.

Additionally, you can specify that existing data in the table must conform to the constraint (VALIDATE). Conversely, if you specify NOVALIDATE, you are not ensured that existing data conforms.

An integrity constraint defined on a table can be in one of the following states:

• ENABLE, VALIDATE

• ENABLE, NOVALIDATE

• DISABLE, VALIDATE

• DISABLE, NOVALIDATE

For details about the meaning of these states and an understanding of their consequences, see the Oracle Database SQL Reference. Some of these consequences are discussed here.

Setting Integrity Constraints Upon Definition

When an integrity constraint is defined in a CREATE TABLE or ALTER TABLE statement, it can be enabled, disabled, or validated or not validated as determined by your specification of the ENABLE/DISABLE clause. If the ENABLE/DISABLE clause is not specified in a constraint definition, the database automatically enables and validates the constraint.

CREATE TABLE emp (
    empno NUMBER(5) PRIMARY KEY DISABLE,   . . . ;

ALTER TABLE emp
   ADD PRIMARY KEY (empno) DISABLE;

CREATE TABLE emp (
    empno NUMBER(5) CONSTRAINT emp.pk PRIMARY KEY,   . . . ;

ALTER TABLE emp
    ADD CONSTRAINT emp.pk PRIMARY KEY (empno);

Modifying, Renaming, or Dropping Existing Integrity Constraints

You can use the ALTER TABLE statement to enable, disable, modify, or drop a constraint. When the database is using a UNIQUE or PRIMARY KEY index to enforce a constraint, and constraints associated with that index are dropped or disabled, the index is dropped, unless you specify otherwise.

While enabled foreign keys reference a PRIMARY or UNIQUE key, you cannot disable or drop the PRIMARY or UNIQUE key constraint or the index.

ALTER TABLE dept
    DISABLE CONSTRAINT dname_ukey;

ALTER TABLE dept
    DISABLE PRIMARY KEY KEEP INDEX,
    DISABLE UNIQUE (dname, loc) KEEP INDEX;

ALTER TABLE dept
    ENABLE NOVALIDATE CONSTRAINT dname_ukey;

ALTER TABLE dept
    ENABLE NOVALIDATE PRIMARY KEY,
    ENABLE NOVALIDATE UNIQUE (dname, loc);

ALTER TABLE dept
    MODIFY CONSTRAINT dname_key VALIDATE;

ALTER TABLE dept
    MODIFY PRIMARY KEY ENABLE NOVALIDATE;

ALTER TABLE dept
    ENABLE CONSTRAINT dname_ukey;

ALTER TABLE dept
    ENABLE PRIMARY KEY,
    ENABLE UNIQUE (dname, loc);

ALTER TABLE dept
    DISABLE PRIMARY KEY CASCADE;

ALTER TABLE dept
    RENAME CONSTRAINT dname_ukey TO dname_unikey;

ALTER TABLE dept
    DROP UNIQUE (dname, loc);

ALTER TABLE emp
    DROP PRIMARY KEY KEEP INDEX,
    DROP CONSTRAINT dept_fkey;

Deferring Constraint Checks

When the database checks a constraint, it signals an error if the constraint is not satisfied. You can defer checking the validity of constraints until the end of a transaction.

When you issue the SET CONSTRAINTS statement, the SET CONSTRAINTS mode lasts for the duration of the transaction, or until another SET CONSTRAINTS statement resets the mode.

SET CONSTRAINTS ALL DEFERRED; 

Reporting Constraint Exceptions

If exceptions exist when a constraint is validated, an error is returned and the integrity constraint remains novalidated. When a statement is not successfully executed because integrity constraint exceptions exist, the statement is rolled back. If exceptions exist, you cannot validate the constraint until all exceptions to the constraint are either updated or deleted.

To determine which rows violate the integrity constraint, issue the ALTER TABLE statement with the EXCEPTIONS option in the ENABLE clause. The EXCEPTIONS option places the rowid, table owner, table name, and constraint name of all exception rows into a specified table.

You must create an appropriate exceptions report table to accept information from the EXCEPTIONS option of the ENABLE clause before enabling the constraint. You can create an exception table by executing the UTLEXCPT.SQL script or the UTLEXPT1.SQL script.

Both of these scripts create a table named EXCEPTIONS. You can create additional exceptions tables with different names by modifying and resubmitting the script.

The following statement attempts to validate the PRIMARY KEY of the dept table, and if exceptions exist, information is inserted into a table named EXCEPTIONS:

ALTER TABLE dept ENABLE PRIMARY KEY EXCEPTIONS INTO EXCEPTIONS;

If duplicate primary key values exist in the dept table and the name of the PRIMARY KEY constraint on dept is sys_c00610, then the following query will display those exceptions:

SELECT * FROM EXCEPTIONS;

The following exceptions are shown:

fROWID               OWNER      TABLE_NAME      CONSTRAINT
------------------  ---------  --------------  -----------
AAAAZ9AABAAABvqAAB  SCOTT      DEPT            SYS_C00610 
AAAAZ9AABAAABvqAAG  SCOTT      DEPT            SYS_C00610 

A more informative query would be to join the rows in an exception report table and the master table to list the actual rows that violate a specific constraint, as shown in the following statement and results:

SELECT deptno, dname, loc FROM dept, EXCEPTIONS
    WHERE EXCEPTIONS.constraint = 'SYS_C00610'
    AND dept.rowid = EXCEPTIONS.row_id;

DEPTNO     DNAME             LOC
---------- --------------    -----------
10         ACCOUNTING        NEW YORK
10         RESEARCH          DALLAS

All rows that violate a constraint must be either updated or deleted from the table containing the constraint. When updating exceptions, you must change the value violating the constraint to a value consistent with the constraint or to a null. After the row in the master table is updated or deleted, the corresponding rows for the exception in the exception report table should be deleted to avoid confusion with later exception reports. The statements that update the master table and the exception report table should be in the same transaction to ensure transaction consistency.

To correct the exceptions in the previous examples, you might issue the following transaction:

UPDATE dept SET deptno = 20 WHERE dname = 'RESEARCH';
DELETE FROM EXCEPTIONS WHERE constraint = 'SYS_C00610';
COMMIT;

When managing exceptions, the goal is to eliminate all exceptions in your exception report table.

Viewing Constraint Information

Oracle Database provides the following views that enable you to see constraint definitions on tables and to identify columns that are specified in constraints:

Manually Recompiling Views

To recompile a view manually, you must have the ALTER ANY TABLE system privilege or the view must be contained in your schema. Use the ALTER VIEW statement with the COMPILE clause to recompile a view. The following statement recompiles the view emp_dept contained in your schema:

ALTER VIEW emp_dept COMPILE;

Manually Recompiling Procedures and Functions

To recompile a standalone procedure manually, you must have the ALTER ANY PROCEDURE system privilege or the procedure must be contained in your schema. Use the ALTER PROCEDURE/FUNCTION statement with the COMPILE clause to recompile a standalone procedure or function. The following statement recompiles the stored procedure update_salary contained in your schema:

ALTER PROCEDURE update_salary COMPILE;

Manually Recompiling Packages

To recompile a package manually, you must have the ALTER ANY PROCEDURE system privilege or the package must be contained in your schema. Use the ALTER PACKAGE statement with the COMPILE clause to recompile either a package body or both a package specification and body. The following statement recompiles just the body of the package acct_mgmt:

ALTER PACKAGE acct_mgmt COMPILE BODY;

The next statement compiles both the body and specification of the package acct_mgmt:

ALTER PACKAGE acct_mgmt COMPILE PACKAGE;

Using a PL/SQL Package to Display Information About Schema Objects

The Oracle-supplied PL/SQL package DBMS_METADATA.GET_DDL lets you obtain metadata (in the form of DDL used to create the object) about a schema object.

Example: Using the DBMS_METADATA Package

The DBMS_METADATA package is a powerful tool for obtaining the complete definition of a schema object. It enables you to obtain all of the attributes of an object in one pass. The object is described as DDL that can be used to (re)create it.

In the following statements the GET_DDL function is used to fetch the DDL for all tables in the current schema, filtering out nested tables and overflow segments. The SET_TRANSFORM_PARAM (with the handle value equal to DBMS_METADATA.SESSION_TRANSFORM meaning "for the current session") is used to specify that storage clauses are not to be returned in the SQL DDL. Afterwards, the session-level transform parameters are reset to their defaults. Once set, transform parameter values remain in effect until specifically reset to their defaults.

EXECUTE DBMS_METADATA.SET_TRANSFORM_PARAM(
     DBMS_METADATA.SESSION_TRANSFORM,'STORAGE',false);
SELECT DBMS_METADATA.GET_DDL('TABLE',u.table_name)
     FROM USER_ALL_TABLES u
     WHERE u.nested='NO' 
     AND (u.iot_type is null or u.iot_type='IOT');
EXECUTE DBMS_METADATA.SET_TRANSFORM_PARAM(
     DBMS_METADATA.SESSION_TRANSFORM,'DEFAULT');

The output from DBMS_METADATA.GET_DDL is a LONG datatype. When using SQL*Plus, your output may be truncated by default. Issue the following SQL*Plus command before issuing the DBMS_METADATA.GET_DDL statement to ensure that your output is not truncated:

SQL> SET LONG 9999

Using Views to Display Information About Schema Objects

These views display general information about schema objects:

The following sections contain examples of using some of these views.

SELECT OBJECT_NAME, OBJECT_TYPE 
    FROM USER_OBJECTS;

OBJECT_NAME                OBJECT_TYPE
-------------------------  -------------------
EMP_DEPT                   CLUSTER
EMP                        TABLE
DEPT                       TABLE
EMP_DEPT_INDEX             INDEX
PUBLIC_EMP                 SYNONYM
EMP_MGR                    VIEW

SELECT TABLE_OWNER, TABLE_NAME, SYNONYM_NAME
    FROM DBA_SYNONYMS
    WHERE OWNER = 'JWARD';

TABLE_OWNER             TABLE_NAME   SYNONYM_NAME
----------------------  -----------  -----------------
SCOTT                   DEPT         DEPT
SCOTT                   EMP          EMP