| Message
|
Message Definition
|
|---|
Out of kernel memory
|
The user request failed because the kernel could not allocate sufficient memory to complete the request successfully. If possible, attempt the request again. If it continues to fail, this may indicate that the system has insufficient resources.
|
IBC error
|
On the Secondary, an attempt was made to dissociate or delete an RLINK from an RVG against which there are outstanding IBC receive ioctls. All such outstanding ioctls must complete before the request will be processed.
|
Duplicate master_datavol mapping
|
Two volumes on the Secondary are mapped to the same volume on the Primary.
|
Multiple attached rlinks on secondary
|
There could be some error during the recovery. The Secondary can only have one active RLINK. Clear the utility fields and then dissociate any inactive RLINKs.
|
Replicated volume may not have a drl
|
An attempt was made to associate a volume with the DRL log to an RVG. A volume with a DRL log is not allowed to be associated to an RVG.
|
SRL cannot be resized
|
An attempt was made to resize the SRL. The resize operation is not allowed if the volume is an SRL.
|
V-5-1-3265 WARNING: DCM log size is smaller than recommended due to increased volume size.
|
To resize the DCM, remove it and use the vxassist addlog command to set the correct size.
|
V-5-1-3265 WARNING: DCM log size will be smaller than recommended due to increased volume size.
|
Remove DCMs from volume and add them back specifying no loglen attribute, to get the default (recommended) size. Then re-issue the vxassist maxgrow command to find out how large the volume can be grown with the new DCM size.
|
