| Sun StorEdge 3000 Family Configuration Service 1.5 User's Guide |    
|
| Sun StorEdge 3000 Family Configuration Service 1.5 User's Guide |
|
| C H A P T E R 2 |
|
Before You Begin |
This chapter contains important information you need to be aware of before you use Sun StorEdge Configuration Service. Topics covered in this chapter include:
For installation instructions, refer to the Sun StorEdge 3000 Family Software Installation Guide.
Many example screens are provided throughout this guide to demonstrate the program. These screens might identify either the Sun StorEdge 3310 array or the Sun StorEdge 3510 FC array in the output. Unless specifically noted that a function, and therefore its example screen, is for the Sun StorEdge 3510 FC array only, either array applies.
You must be superuser (administrator) to run the Sun StorEdge Configuration Service console.
The only Sun StorEdge Configuration Service array function supported for the Sun StorEdge 3120 array is viewing component and alarm characteristics. See Monitoring JBODs for procedures related to the Sun StorEdge 3120 SCSI array.
The only Sun StorEdge Configuration Service array function supported for Sun StorEdge 3000 Family JBODs is viewing component and alarm characteristics. See Monitoring JBODs for procedures related to the Sun StorEdge 3120 SCSI array.
|
Note - JBOD (Just a Bunch of Disks) is an array connected directly to a server with no controllers. |
| Sun StorEdge 3000 Family Configuration Service 1.5 User's Guide | 817-3337-12 |
|
Copyright © 2004, Sun Microsystems, Inc. All rights reserved.