Tables |
TABLE 1-1 Hardware and Software Requirements 3
TABLE 2-1 Blade and Power Supply Status Codes 20
TABLE 2-2 10/100/1000BASE-T Data Network Port Pinouts 22
TABLE 2-3 Serial Port Pinouts 23
TABLE 4-1 user Commands 40
TABLE 4-2 Parameter Description for User Access 42
TABLE 4-3 Parameters for Setting the IP Address 44
TABLE 4-4 Variables for Sending a ping Request 46
TABLE 4-5 Parameters for Configuring the Subnet Mask for a VIP 50
TABLE 4-6 Parameters and Variables for Setting Up a Server for Monitoring 51
TABLE 4-7 Variables for Adding SSL Blade Configurations 52
TABLE 4-8 Parameters for Adding and Removing Port Pairs 53
TABLE 4-9 Variables for Adding or Removing an SSL Blade Interface 54
TABLE 4-10 Options for Setting the TCP Parameters 56
TABLE 4-11 Parameters for Creating a Load Balancing Service 59
TABLE 4-12 Parameters for Adding SSL Devices to a Service 61
TABLE 4-13 Parameters for Removing SSL Devices from a Service 62
TABLE 4-14 Parameters for Modifying SSL Devices in a Service 62
TABLE 4-15 Parameters for Adding a Default Load Balancing Group to a Service 63
TABLE 4-16 TCP, Parameters for a Service 65
TABLE 4-17 Service Point Parameters 67
TABLE 4-18 Service Point Parameters 69
TABLE 4-19 Parameters for Configuring a Service for Persistence 70
TABLE 4-20 Parameters for Configuring a Service for Tracking 72
TABLE 4-21 Parameters for Configuring a Service for Cookie-Based Persistence 74
TABLE 4-22 Parameters for Enabling or Disabling a Server 78
TABLE 4-23 Parameters for Creating an IP Load Balancing Rule 80
TABLE 4-24 Parameters for Creating an HTTP Load Balancing Rule 81
TABLE 4-25 Parameters for Creating Load Balancing Groups 86
TABLE 4-26 Parameters for Adding Rules to a Load Balancing Group 87
TABLE 4-27 Parameters for Adding Servers to a LB Group 89
TABLE 4-28 Parameters for Removing Servers to a LB Group 90
TABLE 4-29 Parameters for Setting Servers to Active or Standby 91
TABLE 4-30 Parameters for Configuring the Diagnostic and Verbosity Level 97
TABLE 4-31 Parameters for Configuring the Debug Level for Specific Modules 98
TABLE 4-32 Module Names to Use for Configuring the Debug Level 98
TABLE 4-33 Parameters for the dump memory Command 101
TABLE 4-34 Parameters for the dump module Command 102
TABLE 4-35 Module Names to Use with the dump module Command 102
TABLE 4-36 Modules in the NPU Listed by Index 103
TABLE 5-1 Parameters for the no enable vlan Command 127
Copyright © 2003, Sun Microsystems, Inc. All rights reserved.