This appendix lists the specifications for the Sun Crypto Accelerator 4000 MMF and UTP adapters. It contains the following sections:
Sun Crypto Accelerator 4000 MMF Adapter
This section provides the specifications for the Sun Crypto Accelerator 4000 MMF adapter.
Connectors
FIGURE A-1 shows the connector for the Sun Crypto Accelerator 4000 MMF adapter.
FIGURE A-1 Sun Crypto Accelerator 4000 MMF Adapter Connector
TABLE A-1 lists the characteristics of the SC connector (850 nm).
TABLE A-1 SC Connector Link Characteristics (IEEE P802.3z)
|
Characteristic
|
62.5 Micron MMF
|
50 Micron MMF
|
|
Operating range
|
Up to 260 meters
|
Up to 550 meters
|
Physical Dimensions
TABLE A-2 Physical Dimensions
|
Dimension
|
Measurement
|
Metric Measurement
|
|
Length
|
12.283 inches
|
312.00 mm
|
|
Width
|
4.200 inches
|
106.68 mm
|
Performance Specifications
TABLE A-3 Performance Specifications
|
Feature
|
Specification
|
|
PCI clock
|
33/66 MHz max
|
|
PCI data burst transfer rate
|
Up to 64-byte bursts
|
|
PCI data/address width
|
32/64-bit
|
|
PCI modes
|
Master/slave
|
|
1 Gbps, 850 nm
|
1000 Mbps (full duplex)
|
Power Requirements
TABLE A-4 Power Requirements
|
Specification
|
Measurement
|
|
Maximum power consumption
|
6.25 W @ 5V
12.75 W @ 3.3V
|
|
Voltage tolerance
|
5V +/- 5%
3.3V +/- 5%
|
Interface Specifications
TABLE A-5 Interface Specifications
|
Feature
|
Specification
|
|
PCI clock
|
33 MHz or 66 MHz
|
|
Host interface
|
PCI 2.1 with support for 33 MHz or 66 MHz clock rate and 3.3V or 5V power.
|
|
PCI bus width
|
32 bits or 64 bits
|
Environmental Specifications
TABLE A-6 Environmental Specifications
|
Condition
|
Operating Specification
|
Storage Specification
|
|
Temperature
|
0° to +55° C, +32° to +131° F
|
-40° to +75° C, -40° to +167° F
|
|
Relative humidity
|
5 to 85% noncondensing
|
0 to 95% noncondensing
|
Sun Crypto Accelerator 4000 UTP Adapter
This section provides the specifications for the Sun Crypto Accelerator 4000 UTP adapter.
Connectors
FIGURE A-1 shows the connector for the Sun Crypto Accelerator 4000 UTP adapter.
FIGURE A-2 Sun Crypto Accelerator 4000 UTP Adapter Connector
TABLE A-7 lists the characteristics of the Cat-5 connector used by the Sun Crypto Accelerator 4000 UTP adapter.
TABLE A-7 Cat-5 Connector Link Characteristics
|
Characteristic
|
Description
|
|
Operating range
|
Up to 100 meters
|
Physical Dimensions
TABLE A-8 Physical Dimensions
|
Dimension
|
Measurement
|
Metric Measurement
|
|
Length
|
12.283 inches
|
312.00 mm
|
|
Width
|
4.200 inches
|
106.68 mm
|
Performance Specifications
TABLE A-9 Performance Specifications
|
Feature
|
Specification
|
|
PCI clock
|
33/66 MHz max
|
|
PCI data burst transfer rate
|
up to 64-byte bursts
|
|
PCI data/address width
|
32/64-bit
|
|
PCI modes
|
Master/slave
|
|
1 Gbps, 850 nm
|
1000 Mbps (full duplex)
|
Power Requirements
TABLE A-10 Power Requirements
|
Specification
|
Measurement
|
|
Maximum power consumption
|
6.25 W @ 5V
12.75 W @ 3.3V
|
|
Voltage tolerance
|
5V +/- 5%
3.3V +/- 5%
|
Interface Specifications
TABLE A-11 Interface Specifications
|
Feature
|
Specification
|
|
PCI clock
|
33 MHz or 66 MHz
|
|
Host interface
|
PCI 2.1 with support for 33 MHz or 66 MHz clock rate and 3.3V or 5V power
|
|
PCI bus width
|
32 bits or 64 bits
|
Environmental Specifications
TABLE A-12 Environmental Specifications
|
Condition
|
Operating Specification
|
Storage Specification
|
|
Temperature
|
0° to +55° C, +32° to +131° F
|
-40° to +75° C, -40° to +167° F
|
|
Relative humidity
|
5 to 85% noncondensing
|
0 to 95% noncondensing
|
