B - A P P E N D I X -

A P P E N D I X B

Console Output for the Automatic Software Install on the Cluster Nodes

The first portion of the installation installs the Solaris operating environment and configuration files, Solstice DiskSuite software, and patches on cluster node 1.

Note - Disregard the message, WARNING: Failed to register application "DiskSuite Tool" with solstice launcher. Solstice Launcher application is not installed.

After the first reboot, the second portion of the installation sets up the Solstice DiskSuite software.

{4} ok boot net - install Resetting... Software Power ON screen not found. Can't open input device. Keyboard not present. Using ttya for input and output. 8-slot Sun Enterprise E4500/E5500, No Keyboard OpenBoot 3.2.28, 8192 MB memory installed, Serial #15070773. Copyright 2000 Sun Microsystems, Inc. All rights reserved Ethernet address 8:0:20:e5:f6:35, Host ID: 80e5f635. Rebooting with command: boot net - install Boot device: /sbus@3,0/SUNW,hme@3,8c00000 File and args: - install SunOS Release 5.8 Version Generic_108528-03 64-bit Copyright 1983-2000 Sun Microsystems, Inc. All rights reserved. whoami: no domain name Configuring /dev and /devices Using RPC Bootparams for network configuration information. SUNW,hme3 : No response from Ethernet network : Link down -- cable problem? Skipping interface hme3 NOTICE: SUNW,qfe7: No response from Ethernet network : Link Down - cable problem? Skipping interface qfe7 NOTICE: SUNW,qfe6: No response from Ethernet network : Link Down - cable problem? Skipping interface qfe6 NOTICE: SUNW,qfe5: No response from Ethernet network : Link Down - cable problem? Skipping interface qfe5 Skipping interface qfe4 SUNW,hme2 : No response from Ethernet network : Link down -- cable problem? Skipping interface hme2 SUNW,hme1 : No response from Ethernet network : Link down -- cable problem? Skipping interface hme1 NOTICE: SUNW,qfe3: No response from Ethernet network : Link Down - cable problem? Skipping interface qfe3 NOTICE: SUNW,qfe2: No response from Ethernet network : Link Down - cable problem? Skipping interface qfe2 NOTICE: SUNW,qfe1: No response from Ethernet network : Link Down - cable problem? Skipping interface qfe1 Skipping interface qfe0 Configured interface hme0 Using sysid configuration file 129.153.47.38:/SOFTWARE/Solaris8_10-00/sysidcfg The system is coming up. Please wait. Starting remote procedure call (RPC) services: sysidns done. Starting Solaris installation program... Searching for JumpStart directory... Using rules.ok from 192.153.47.38:/SOFTWARE/Solaris8_10-00. Checking rules.ok file... Using profile: Profiles/sc3sconf1-n0.profile Using finish script: Drivers/sc3sconf1-n0.driver Executing JumpStart preinstall phase... Searching for SolStart directory... Checking rules.ok file... Using begin script: install_begin Using finish script: patch_finish Executing SolStart preinstall phase... Executing begin script "install_begin"... Begin script install_begin execution completed. Processing default locales Processing profile - Selecting cluster (SUNWCXall) - Deselecting package (SUNWpmowm) - Deselecting package (SUNWpmowu) - Deselecting package (SUNWpmr) - Deselecting package (SUNWpmu) - Deselecting package (SUNWpmux) - Selecting locale (en_US) Installing 64 bit Solaris packages - Selecting all disks - Configuring boot device - Configuring (c0t2d0s0) - Configuring swap (c0t2d0s1) - Configuring /globaldevices (c0t2d0s7) - Configuring (c2t2d0s0) - Configuring (c2t2d0s1) - Configuring (c2t2d0s7) - Configuring (c0t3d0s0) - Configuring (c0t3d0s1) - Configuring (c0t3d0s7) - Configuring (c2t3d0s0) - Configuring (c2t3d0s1) - Configuring (c2t3d0s7) - Configuring / (c0t2d0s3) - Configuring (c2t2d0s3) - Configuring (c0t3d0s3) - Configuring (c2t3d0s3) - Deselecting unmodified disk (c1t0d0) - Deselecting unmodified disk (c3t0d0) Verifying disk configuration Verifying space allocation - Total software size: 734.50 Mbytes Preparing system for Solaris install Configuring disk (c0t2d0) - Creating Solaris disk label (VTOC) Configuring disk (c0t3d0) - Creating Solaris disk label (VTOC) Configuring disk (c2t2d0) - Creating Solaris disk label (VTOC) Configuring disk (c2t3d0) - Creating Solaris disk label (VTOC) Creating and checking UFS file systems - Creating / (c0t2d0s3) - Creating /globaldevices (c0t2d0s7) Beginning Solaris software installation Starting software installation ======== ----Long list of packages at this spot---- ======== Completed software installation Solaris 8 software installation succeeded Customizing system files - Mount points table (/etc/vfstab) - Unselected disk mount points (/var/sadm/system/data/vfstab.unselected) - Network host addresses (/etc/hosts) Customizing system devices - Physical devices (/devices) - Logical devices (/dev) Installing boot information - Installing boot blocks (c0t2d0s3) Installation log location - /a/var/sadm/system/logs/install_log (before reboot) - /var/sadm/system/logs/install_log (after reboot) Installation complete Executing SolStart postinstall phase... Executing finish script "patch_finish"... Finish script patch_finish execution completed. Executing JumpStart postinstall phase... Executing finish script "Drivers/sc3sconf1-n0.driver"... ROOT_DIR is set to /a. FINISH_DIR is set to /tmp/install_config/Finish. FILES_DIR is set to /tmp/install_config/Files. Management Server "MStest01" (192.153.47.38) at 8:0:20:c2:1b:3c Variable Settings (Final) ------------------------------------------- Management Server's Default Router= "192.153.47.248" Cluster Name= "sc3sconf1" Terminal Server's Name= "sc3sconf1-tc" Terminal Server's IP Address= "192.153.47.62" First Node's Name= "sc3sconf1-n1" First Node's IP Address= "192.145.23.91" First Node's Ethernet Address= "9:8:50:bf:c5:91" Second Node's Name= "sc3sconf1-n2" Second Node's IP Address= "192.145.23.92" Second Node's Ethernet Address= "8:9:10:cd:ef:b3" building the /.profile file... building the /etc/motd file to include cluster messages... building the /.rhosts file to allow SDS rsh root access... establishing the default router on the cluster node... disabling software routing on the cluster node... including customized environment in the /etc/hosts file... UNAME is set to 5.8. PACKAGE_MOUNT is set to 129.212.87.38:/SOFTWARE/Solaris8_10-00/Packages. PACKAGE_DIR is set to /tmp/jumpstart-packages. PATCH_MOUNT is set to 129.212.87.38:/SOFTWARE/Solaris8_10-00/Patches/. PATCH_DIR is set to /tmp/install_config/Patches. ================ sc3sconf1-n0.driver: Driver started. ================ NOTICE: Mounting 192.153.47.38:/SOFTWARE/Solaris8_10-00/Packages on /a//tmp/jumpstart-packages. NOTICE: Mounting 192.153.47.38:/SOFTWARE/Solaris8_10-00/Patches/ on /a//tmp/install_config/Patches. ================ sc3sconf1-n0.driver: Starting finish script: add_sds.fin ================ =========================== Installing Package: SUNWmdg =========================== Processing package instance <SUNWmdg> from </a/tmp/jumpstart-packages> Solstice DiskSuite Tool (sparc) 4.2.1,REV=1999.11.04.18.29 Copyright 2000 Sun Microsystems, Inc. All rights reserved. ## Executing checkinstall script. Using </a> as the package base directory. ## Processing package information. ## Processing system information. 4 package pathnames are already properly installed. ## Verifying disk space requirements. Installing Solstice DiskSuite Tool as <SUNWmdg> ## Executing preinstall script. ## Installing part 1 of 1. /a/usr/lib/lvm/X11/app-defaults/Metatool /a/usr/lib/lvm/metatool-toolsmenu [ verifying class <preserve> ] ## Executing postinstall script. Killed Killed WARNING: Failed to register application "DiskSuite Tool" with solstice launcher. Installation of <SUNWmdg> was successful. =========================== Installing Package: SUNWmdja =========================== Processing package instance <SUNWmdja> from </a/tmp/jumpstart-packages> Solstice DiskSuite Japanese localization (sparc) 4.2.1,REV=1999.12.09.15.37 Copyright 2000 Sun Microsystems, Inc. All rights reserved. ## Executing checkinstall script. Using </a> as the package base directory. ## Processing package information. ## Processing system information. 8 package pathnames are already properly installed. ## Verifying disk space requirements. Installing Solstice DiskSuite Japanese localization as <SUNWmdja> ## Executing preinstall script. ## Installing part 1 of 1. 709 blocks /a/usr/lib/lvm/X11/ja/app-defaults/Metatool /a/usr/lib/lvm/locale/ja/metatool-toolsmenu [ verifying class <preserve> ] ## Executing postinstall script. Killed Killed WARNING: Failed to register application "DiskSuite Tool" with solstice launcher. Installation of <SUNWmdja> was successful.

CODE EXAMPLE B-1 Solaris Software, Solstice DiskSuite, and Patches

{4} ok boot net - install

Resetting...

Software Power ON

screen not found.

Can't open input device.

Keyboard not present.  Using ttya for input and output.

8-slot Sun Enterprise E4500/E5500, No Keyboard

OpenBoot 3.2.28, 8192 MB memory installed, Serial #15070773.

Copyright 2000 Sun Microsystems, Inc.  All rights reserved

Ethernet address 8:0:20:e5:f6:35, Host ID: 80e5f635.

Rebooting with command: boot net - install

Boot device: /sbus@3,0/SUNW,hme@3,8c00000  File and args: - install

SunOS Release 5.8 Version Generic_108528-03 64-bit

Copyright 1983-2000 Sun Microsystems, Inc.  All rights reserved.

whoami: no domain name

Configuring /dev and /devices

Using RPC Bootparams for network configuration information.

SUNW,hme3 : No response from Ethernet network : Link down -- cable problem?

Skipping interface hme3

NOTICE: SUNW,qfe7: No response from Ethernet network : Link Down - cable problem?

Skipping interface qfe7

NOTICE: SUNW,qfe6: No response from Ethernet network : Link Down - cable problem?

Skipping interface qfe6

NOTICE: SUNW,qfe5: No response from Ethernet network : Link Down - cable problem?

Skipping interface qfe5

Skipping interface qfe4

SUNW,hme2 : No response from Ethernet network : Link down -- cable problem?

Skipping interface hme2

SUNW,hme1 : No response from Ethernet network : Link down -- cable problem?

Skipping interface hme1

NOTICE: SUNW,qfe3: No response from Ethernet network : Link Down - cable problem?

Skipping interface qfe3

NOTICE: SUNW,qfe2: No response from Ethernet network : Link Down - cable problem?

Skipping interface qfe2

NOTICE: SUNW,qfe1: No response from Ethernet network : Link Down - cable problem?

Skipping interface qfe1

Skipping interface qfe0

Configured interface hme0

Using sysid configuration file 129.153.47.38:/SOFTWARE/Solaris8_10-00/sysidcfg

The system is coming up.  Please wait.

Starting remote procedure call (RPC) services: sysidns done.

Starting Solaris installation program...

Searching for JumpStart directory...

Using rules.ok from 192.153.47.38:/SOFTWARE/Solaris8_10-00.

Checking rules.ok file...

Using profile: Profiles/sc3sconf1-n0.profile

Using finish script: Drivers/sc3sconf1-n0.driver

Executing JumpStart preinstall phase...

Searching for SolStart directory...

Checking rules.ok file...

Using begin script: install_begin

Using finish script: patch_finish

Executing SolStart preinstall phase...

Executing begin script "install_begin"...

Begin script install_begin execution completed.

Processing default locales

Processing profile

- Selecting cluster (SUNWCXall)

 - Deselecting package (SUNWpmowm)

 - Deselecting package (SUNWpmowu)

- Deselecting package (SUNWpmr)

 - Deselecting package (SUNWpmu)

 - Deselecting package (SUNWpmux)

- Selecting locale (en_US)

Installing 64 bit Solaris packages

 - Selecting all disks

 - Configuring boot device

- Configuring  (c0t2d0s0)

 - Configuring swap (c0t2d0s1)

 - Configuring /globaldevices (c0t2d0s7)

 - Configuring  (c2t2d0s0)

 - Configuring  (c2t2d0s1)

- Configuring  (c2t2d0s7)

 - Configuring  (c0t3d0s0)

 - Configuring  (c0t3d0s1)

 - Configuring  (c0t3d0s7)

 - Configuring  (c2t3d0s0)

- Configuring  (c2t3d0s1)

 - Configuring  (c2t3d0s7)

 - Configuring / (c0t2d0s3)

 - Configuring  (c2t2d0s3)

 - Configuring  (c0t3d0s3)

 - Configuring  (c2t3d0s3)

 - Deselecting unmodified disk (c1t0d0)

 - Deselecting unmodified disk (c3t0d0)

Verifying disk configuration

Verifying space allocation

 - Total software size:  734.50 Mbytes

Preparing system for Solaris install

Configuring disk (c0t2d0)

- Creating Solaris disk label (VTOC)

Configuring disk (c0t3d0)

- Creating Solaris disk label (VTOC)

Configuring disk (c2t2d0)

 - Creating Solaris disk label (VTOC)

Configuring disk (c2t3d0)

 - Creating Solaris disk label (VTOC)

Creating and checking UFS file systems

 - Creating / (c0t2d0s3)

- Creating /globaldevices (c0t2d0s7)

Beginning Solaris software installation

Starting software installation

========

 ----Long list of packages at this spot----

========

Completed software installation

Solaris 8 software installation succeeded

Customizing system files

 - Mount points table (/etc/vfstab)

 - Unselected disk mount points

(/var/sadm/system/data/vfstab.unselected)

- Network host addresses (/etc/hosts)

Customizing system devices

- Physical devices (/devices)

 - Logical devices (/dev)

Installing boot information

 - Installing boot blocks (c0t2d0s3)

Installation log location

 - /a/var/sadm/system/logs/install_log (before reboot)

 - /var/sadm/system/logs/install_log (after reboot)

Installation complete

Executing SolStart postinstall phase...

Executing finish script "patch_finish"...

Finish script patch_finish execution completed.

Executing JumpStart postinstall phase...

Executing finish script "Drivers/sc3sconf1-n0.driver"...

ROOT_DIR is set to /a.

FINISH_DIR is set to /tmp/install_config/Finish.

FILES_DIR is set to /tmp/install_config/Files.

Management Server "MStest01" (192.153.47.38) at 8:0:20:c2:1b:3c

 Variable Settings (Final)

-------------------------------------------

Management Server's Default Router= "192.153.47.248"

Cluster Name= "sc3sconf1"

Terminal Server's Name= "sc3sconf1-tc"

Terminal Server's IP Address= "192.153.47.62"

First Node's Name= "sc3sconf1-n1"

First Node's IP Address= "192.145.23.91"

First Node's Ethernet Address= "9:8:50:bf:c5:91"

Second Node's Name= "sc3sconf1-n2"

Second Node's IP Address= "192.145.23.92"

Second Node's Ethernet Address= "8:9:10:cd:ef:b3"

building the /.profile file...

building the /etc/motd file to include cluster messages...

building the /.rhosts file to allow SDS rsh root access...

establishing the default router on the cluster node...

disabling software routing on the cluster node...

including customized environment in the /etc/hosts file...

UNAME is set to 5.8.

PACKAGE_MOUNT is set to 129.212.87.38:/SOFTWARE/Solaris8_10-00/Packages.

PACKAGE_DIR is set to /tmp/jumpstart-packages.

PATCH_MOUNT is set to 129.212.87.38:/SOFTWARE/Solaris8_10-00/Patches/.

PATCH_DIR is set to /tmp/install_config/Patches.

================

sc3sconf1-n0.driver: Driver started.

================

NOTICE: Mounting 192.153.47.38:/SOFTWARE/Solaris8_10-00/Packages on /a//tmp/jumpstart-packages.

NOTICE: Mounting 192.153.47.38:/SOFTWARE/Solaris8_10-00/Patches/ on /a//tmp/install_config/Patches.

================

sc3sconf1-n0.driver: Starting finish script: add_sds.fin

================

===========================

Installing Package: SUNWmdg

===========================

Processing package instance <SUNWmdg> from </a/tmp/jumpstart-packages>

Solstice DiskSuite Tool

(sparc) 4.2.1,REV=1999.11.04.18.29

Copyright 2000 Sun Microsystems, Inc. All rights reserved.

## Executing checkinstall script.

Using </a> as the package base directory.

## Processing package information.

## Processing system information.

 4 package pathnames are already properly installed.

## Verifying disk space requirements.

Installing Solstice DiskSuite Tool as <SUNWmdg>

## Executing preinstall script.

## Installing part 1 of 1.

/a/usr/lib/lvm/X11/app-defaults/Metatool

/a/usr/lib/lvm/metatool-toolsmenu

[ verifying class <preserve> ]

## Executing postinstall script.

Killed

Killed

WARNING: Failed to register application "DiskSuite Tool" with solstice launcher.

Installation of <SUNWmdg> was successful.

===========================

Installing Package: SUNWmdja

===========================

Processing package instance <SUNWmdja> from </a/tmp/jumpstart-packages>

Solstice DiskSuite Japanese localization

(sparc) 4.2.1,REV=1999.12.09.15.37

Copyright 2000 Sun Microsystems, Inc. All rights reserved.

## Executing checkinstall script.

Using </a> as the package base directory.

## Processing package information.

## Processing system information.

 8 package pathnames are already properly installed.

## Verifying disk space requirements.

Installing Solstice DiskSuite Japanese localization as <SUNWmdja>

## Executing preinstall script.

## Installing part 1 of 1.

709 blocks

/a/usr/lib/lvm/X11/ja/app-defaults/Metatool

/a/usr/lib/lvm/locale/ja/metatool-toolsmenu

[ verifying class <preserve> ]

## Executing postinstall script.

Killed

Killed

WARNING: Failed to register application "DiskSuite Tool" with solstice launcher.

Installation of <SUNWmdja> was successful.

After the second reboot, the system boots as a cluster node and joins the cluster. The mirror metadevices are attached for the boot, swap, and global devices partitions.

Finally, node 1 is mirrored and rebooted.

syncing file systems... done rebooting... Resetting.. Software Power ON screen not found. Can't open input device. Keyboard not present. Using ttya for input and output. 8-slot Sun Enterprise E4500/E5500, No Keyboard OpenBoot 3.2.28, 8192 MB memory installed, Serial #15070773. Copyright 2000 Sun Microsystems, Inc. All rights reserved Ethernet address 9:8:50:bf:c5:91, Host ID: 98bfc591. Rebooting with command: boot Boot device: disk2:d File and args: SunOS Release 5.8 Version Generic_108528-05 64-bit Copyright 1983-2000 Sun Microsystems, Inc. All rights reserved. configuring IPv4 interfaces: hme0. Hostname: sc3sconf1-n1 Configuring /dev and /devices Configuring the /dev directory (compatibility devices) The system is coming up. Please wait. checking ufs filesystems /dev/rdsk/c0t2d0s7: is clean. Configuring network interface addresses: hme0 hme1SUNW,hme1 : No response from Ethernet network : Link down -- cable problem? hme2SUNW,hme2 : No response from Ethernet network : Link down -- cable problem? hme3SUNW,hme3 : No response from Ethernet network : Link down -- cable problem? qfe0SUNW,qfe0: 100 Mbps full duplex link up - internal transceiver qfe1NOTICE: SUNW,qfe1: No response from Ethernet network : Link Down - cable problem? qfe2NOTICE: SUNW,qfe2: No response from Ethernet network : Link Down - cable problem? qfe3NOTICE: SUNW,qfe3: No response from Ethernet network : Link Down - cable problem? qfe4 qfe5NOTICE: SUNW,qfe5: No response from Ethernet network : Link Down - cable problem? qfe6NOTICE: SUNW,qfe6: No response from Ethernet network : Link Down - cable problem? qfe7NOTICE: SUNW,qfe7: No response from Ethernet network : Link Down - cable problem? . starting rpc services: rpcbind done. Setting netmask of hme0 to 255.255.255.0 Setting default IPv4 interface for multicast: add net 224.0/4: gateway sc3sconf1-n1 syslog service starting. Print services started. Feb 27 12:02:23 sc3sconf1-n0 sendmail[596]: My unqualified host name (sc3sconf1-n1) unknown; sleeping for retry volume management starting. =========================== Setting up Meta DB's =========================== ============================================================ PLEASE WAIT: Setting up system for root and swap mirroring. System will reboot after setup! ============================================================ hsp001: Hotspare pool is setup hsp002: Hotspare pool is setup d2: Concat/Stripe is setup d3: Concat/Stripe is setup d6: Concat/Stripe is setup d7: Concat/Stripe is setup d11: Concat/Stripe is setup d12: Concat/Stripe is setup d1: Mirror is setup d10: Mirror is setup ====================== Modifying /etc/vfstab ====================== Dump content: kernel pages Dump device: /dev/md/dsk/d5 (dedicated) Savecore directory: /var/crash/sc3sconf1-n0 Savecore enabled: yes installing cluster software on the cluster nodes... Found the sc3sconf1-n1 to be the first cluster node Installing SunCluster 3.0 SUNWscr.....done SUNWscdev...done SUNWscu.....done SUNWscman...done SUNWscsal...Feb 27 12:03:23 sc3sconf1-n1 sendmail[596]: unable to qualify my own domain name (sc3sconf1-n1) -- using short name done SUNWscsam...done SUNWscvm....done SUNWmdm.....done Initializing cluster name to "sc3sconf1" ... done Initializing authentication options ... done Initializing configuration for adapter "qfe0" ... done Initializing configuration for adapter "qfe4" ... done Setting the node ID for "sc3sconf1-n1" ... done (id=1) Checking for global devices global file system ... done Checking device to use for global devices file system ... done Updating vfstab ... done Verifying that NTP is configured ... done Installing a default NTP configuration ... done Please complete the NTP configuration after scinstall has finished. Verifying that "cluster" is set for "hosts" in nsswitch.conf ... done Adding the "cluster" switch to "hosts" in nsswitch.conf ... done Verifying that "cluster" is set for "netmasks" in nsswitch.conf ... done Adding the "cluster" switch to "netmasks" in nsswitch.conf ... done Verifying that power management is NOT configured ... done Ensure network routing is disabled ... done Please re-boot this machine. Log file - /var/cluster/logs/install/scinstall.log.642 Checking installed patches... Verifying sufficient filesystem capacity (dry run method)... Installing patch packages... Patch number 110648-02 has been successfully installed. See /var/sadm/patch/110648-02/log for details Patch packages installed: SUNWscdev SUNWscr SUNWscu Updating the /etc/inet/ntp.conf file.... ============================================================ System will reboot now! ============================================================ syncing file systems... done rebooting... Resetting.. Software Power ON screen not found. Can't open input device. Keyboard not present. Using ttya for input and output. 8-slot Sun Enterprise E4500/E5500, No Keyboard OpenBoot 3.2.28, 8192 MB memory installed, Serial #15070773. Copyright 2000 Sun Microsystems, Inc. All rights reserved

CODE EXAMPLE B-2 Solstice DiskSuite Configuration

syncing file systems... done

rebooting...

Resetting..

Software Power ON

screen not found.

Can't open input device.

Keyboard not present.  Using ttya for input and output.

8-slot Sun Enterprise E4500/E5500, No Keyboard

OpenBoot 3.2.28, 8192 MB memory installed, Serial #15070773.

Copyright 2000 Sun Microsystems, Inc.  All rights reserved

Ethernet address 9:8:50:bf:c5:91, Host ID: 98bfc591.

Rebooting with command: boot

Boot device: disk2:d  File and args:

SunOS Release 5.8 Version Generic_108528-05 64-bit

Copyright 1983-2000 Sun Microsystems, Inc.  All rights reserved.

configuring IPv4 interfaces: hme0.

Hostname: sc3sconf1-n1

Configuring /dev and /devices

Configuring the /dev directory (compatibility devices)

The system is coming up.  Please wait.

checking ufs filesystems

/dev/rdsk/c0t2d0s7: is clean.

Configuring network interface addresses: hme0 hme1SUNW,hme1 : No response from Ethernet network : Link down -- cable problem?

hme2SUNW,hme2 : No response from Ethernet network : Link down -- cable problem?

hme3SUNW,hme3 : No response from Ethernet network : Link down -- cable problem?

qfe0SUNW,qfe0: 100 Mbps full duplex link up - internal  transceiver

qfe1NOTICE: SUNW,qfe1: No response from Ethernet network : Link Down - cable problem?

qfe2NOTICE: SUNW,qfe2: No response from Ethernet network : Link Down - cable problem?

qfe3NOTICE: SUNW,qfe3: No response from Ethernet network : Link Down - cable problem?

qfe4 qfe5NOTICE: SUNW,qfe5: No response from Ethernet network : Link Down - cable problem?

qfe6NOTICE: SUNW,qfe6: No response from Ethernet network : Link Down - cable problem?

qfe7NOTICE: SUNW,qfe7: No response from Ethernet network : Link Down - cable problem?

starting rpc services: rpcbind done.

Setting netmask of hme0 to 255.255.255.0

Setting default IPv4 interface for multicast: add net 224.0/4: gateway sc3sconf1-n1

syslog service starting.

Print services started.

Feb 27 12:02:23 sc3sconf1-n0 sendmail[596]: My unqualified host name (sc3sconf1-n1) unknown; sleeping for retry

volume management starting.

===========================

Setting up Meta DB's

===========================

============================================================

PLEASE WAIT: Setting up system for root and swap mirroring.

System will reboot after setup!

============================================================

hsp001: Hotspare pool is setup

hsp002: Hotspare pool is setup

d2: Concat/Stripe is setup

d3: Concat/Stripe is setup

d6: Concat/Stripe is setup

d7: Concat/Stripe is setup

d11: Concat/Stripe is setup

d12: Concat/Stripe is setup

d1: Mirror is setup

d10: Mirror is setup

======================

Modifying /etc/vfstab

======================

Dump content: kernel pages

Dump device: /dev/md/dsk/d5 (dedicated)

Savecore directory: /var/crash/sc3sconf1-n0

Savecore enabled: yes

installing cluster software on the cluster nodes...

Found the sc3sconf1-n1 to be the first cluster node

** Installing SunCluster 3.0 **

SUNWscr.....done

SUNWscdev...done

SUNWscu.....done

SUNWscman...done

SUNWscsal...Feb 27 12:03:23 sc3sconf1-n1 sendmail[596]: unable to qualify my own domain name (sc3sconf1-n1) -- using short name

done

SUNWscsam...done

SUNWscvm....done

SUNWmdm.....done

Initializing cluster name to "sc3sconf1" ... done

Initializing authentication options ... done

Initializing configuration for adapter "qfe0" ... done

Initializing configuration for adapter "qfe4" ... done

Setting the node ID for "sc3sconf1-n1" ... done (id=1)

Checking for global devices global file system ... done

Checking device to use for global devices file system ... done

Updating vfstab ... done

Verifying that NTP is configured ... done

Installing a default NTP configuration ... done

Please complete the NTP configuration after scinstall has finished.

Verifying that "cluster" is set for "hosts" in nsswitch.conf ... done

Adding the "cluster" switch to "hosts" in nsswitch.conf ... done

Verifying that "cluster" is set for "netmasks" in nsswitch.conf ... done

Adding the "cluster" switch to "netmasks" in nsswitch.conf ... done

Verifying that power management is NOT configured ... done

Ensure network routing is disabled ... done

Please re-boot this machine.

Log file - /var/cluster/logs/install/scinstall.log.642

Checking installed patches...

Verifying sufficient filesystem capacity (dry run method)...

Installing patch packages...

Patch number 110648-02 has been successfully installed.

See /var/sadm/patch/110648-02/log for details

Patch packages installed:

 SUNWscdev

 SUNWscr

 SUNWscu

Updating the /etc/inet/ntp.conf file....

============================================================

System will reboot now!

============================================================

syncing file systems... done

rebooting...

Resetting..

Software Power ON

screen not found.

Can't open input device.

Keyboard not present.  Using ttya for input and output.

8-slot Sun Enterprise E4500/E5500, No Keyboard

OpenBoot 3.2.28, 8192 MB memory installed, Serial #15070773.

Copyright 2000 Sun Microsystems, Inc.  All rights reserved

removing /etc/rc2.d/S94n0-sds-mirror script... Apr 20 14:30:50 node1 reboot: rebooted by root Apr 20 14:30:50 node1 syslogd: going down on signal 15 syncing file systems... done rebooting... Resetting... Software Power ON screen not found. Can't open input device. Keyboard not present. Using ttya for input and output 8-slot Sun Enterprise E4500/E5500, No Keyboard OpenBoot 3.2.28, 8192 MB memory installed, Serial #15070773. Copyright 2000 Sun Microsystems, Inc. All rights reserved Ethernet address 9:8:50:bf:c5:91, Host ID: 98bfc591. Rebooting with command: boot Boot device: disk2:d File and args: SunOS Release 5.8 Version Generic_108528-06 64-bit Copyright 1983-2000 Sun Microsystems, Inc. All rights reserved. WARNING: forceload of misc/md_trans failed WARNING: forceload of misc/md_raid failed configuring IPv4 interfaces: hme0 Hostname: node1 /usr/cluster/bin/scdidadm: Could not load DID instance list. Cannot open /etc/cluster/ccr/did_instances. Booting as part of a cluster NOTICE: CMM: Node node1 (nodeid = 1) with votecount = 1 added. NOTICE: CMM: Node node1: attempting to join cluster. NOTICE: CMM: Cluster has reached quorum. NOTICE: CMM: Node node1 (nodeid = 1) is up; new incarnation number = 987802510. NOTICE: CMM: Cluster members: node1. NOTICE: CMM: node reconfiguration #1 completed. NOTICE: CMM: Node node1: joined cluster. Configuring /dev and /devices Configuring the /dev directory (compatibility devices) Configuring DID devices did instance 1 created. did subpath /dev/rdsk/c0t2d0s2 created for instance 1. did instance 2 created. did subpath /dev/rdsk/c0t3d0s2 created for instance 2. did instance 3 created. did subpath /dev/rdsk/c0t6d0s2 created for instance 3. did instance 4 created. did subpath /dev/rdsk/c1t0d0s2 created for instance 4. did instance 5 created. did subpath /dev/rdsk/c2t2d0s2 created for instance 5. did instance 6 created. did subpath /dev/rdsk/c2t3d0s2 created for instance 6. did instance 7 created. did subpath /dev/rdsk/c3t0d0s2 created for instance 7. obtaining access to all attached disks The system is coming up. Please wait. starting rpc services: rpcbind done. Setting netmask of lo0:1 to 192.255.255.255 Setting netmask of hme0 to 192.255.255.0 Setting default IPv4 interface for multicast: add net 192.0/4: gateway node1 syslog service starting. obtaining access to all attached disks Configuring the /dev/global directory (global devices) Apr 20 14:36:55 sc3sconf1-n1 cl_runtime: NOTICE: CMM: Node tn1 (nodeid = 2) with votecount = 0 added. Apr 20 14:36:55 sc3sconf1-n1 cl_runtime: NOTICE: CMM: Cluster members: Apr 20 14:36:41 sc3sconf1-n1 xntpd[288]: couldn't resolve `clusternode2- priv', giving up on it sc3sconf1-n1. Apr 20 14:36:55 sc3sconf1-n1 cl_runtime: NOTICE: CMM: node reconfiguration #2 completed. Apr 20 14:36:56 sc3sconf1-n1 cl_runtime: NOTICE: clcomm: Adapter qfe0 constructed Apr 20 14:36:56 sc3sconf1-n1 cl_runtime: NOTICE: clcomm: Path sc3sconf1-n10:qfe0 - tn1:qfe0 being constructed Apr 20 14:36:57 sc3sconf1-n1 cl_runtime: NOTICE: clcomm: Adapter qfe4 constructed Apr 20 14:36:57 sc3sconf1-n1 cl_runtime: NOTICE: clcomm: Path sc3sconf1-n1:qfe4 - tn1:qfe4 being constructed Apr 20 14:37:38 sc3sconf1-n1 qfe: SUNW,qfe0: 100 Mbps full duplex link up - internal transceiver Apr 20 14:37:38 sc3sconf1-n1 qfe: SUNW,qfe4: 100 Mbps full duplex link up - internal transceiver Apr 20 14:37:47 sc3sconf1-n1 cl_runtime: WARNING: Path sc3sconf1-n1:qfe0 - tn1:qfe0 initiation encountered errors, errno = 62. Remote node may be down or unreachable through this path. Apr 20 14:37:47 sc3sconf1-n1 cl_runtime: NOTICE: clcomm: Path sc3sconf1-n1:qfe0 - tn1:qfe0 errors during initiation Apr 20 14:37:47 sc3sconf1-n1 cl_runtime: NOTICE: clcomm: Path sc3sconf1-n1:qfe4 - tn1:qfe4 errors during initiation Apr 20 14:37:47 sc3sconf1-n1 cl_runtime: WARNING: Path sc3sconf1-n1:qfe4 - tn1:qfe4 initiation encountered errors, errno = 62. Remote node may be down or unreachable through this path. obtaining access to all attached disks Print services started. d1: submirror d3 is attached d5: submirror d7 is attached d10: submirror d12 is attached volume management starting. The system is ready. sc3sconf1-n1 console login: removing /etc/rc2.d/S94n0-sds-mirror script...

CODE EXAMPLE B-3 Metadevice Mirror Attachment and Cluster Node Booting

removing /etc/rc2.d/S94n0-sds-mirror script...

Apr 20 14:30:50 node1 reboot: rebooted by root

Apr 20 14:30:50 node1 syslogd: going down on signal 15

syncing file systems... done

rebooting...

Resetting...

Software Power ON

screen not found.

Can't open input device.

Keyboard not present.  Using ttya for input and output

8-slot Sun Enterprise E4500/E5500, No Keyboard

OpenBoot 3.2.28, 8192 MB memory installed, Serial #15070773.

Copyright 2000 Sun Microsystems, Inc.  All rights reserved

Ethernet address 9:8:50:bf:c5:91, Host ID: 98bfc591.

Rebooting with command: boot

Boot device: disk2:d  File and args:

SunOS Release 5.8 Version Generic_108528-06 64-bit

Copyright 1983-2000 Sun Microsystems, Inc.  All rights reserved.

WARNING: forceload of misc/md_trans failed

WARNING: forceload of misc/md_raid failed

configuring IPv4 interfaces: hme0

Hostname: node1

/usr/cluster/bin/scdidadm: Could not load DID instance list.

Cannot open /etc/cluster/ccr/did_instances.

Booting as part of a cluster

NOTICE: CMM: Node node1 (nodeid = 1) with votecount = 1 added.

NOTICE: CMM: Node node1: attempting to join cluster.

NOTICE: CMM: Cluster has reached quorum.

NOTICE: CMM: Node node1 (nodeid = 1) is up; new incarnation number

= 987802510.

NOTICE: CMM: Cluster members: node1.

NOTICE: CMM: node reconfiguration #1 completed.

NOTICE: CMM: Node node1: joined cluster.

Configuring /dev and /devices

Configuring the /dev directory (compatibility devices)

Configuring DID devices

did instance 1 created.

did subpath /dev/rdsk/c0t2d0s2 created for instance 1.

did instance 2 created.

did subpath /dev/rdsk/c0t3d0s2 created for instance 2.

did instance 3 created.

did subpath /dev/rdsk/c0t6d0s2 created for instance 3.

did instance 4 created.

did subpath /dev/rdsk/c1t0d0s2 created for instance 4.

did instance 5 created.

did subpath /dev/rdsk/c2t2d0s2 created for instance 5.

did instance 6 created.

did subpath /dev/rdsk/c2t3d0s2 created for instance 6.

did instance 7 created.

did subpath /dev/rdsk/c3t0d0s2 created for instance 7.

obtaining access to all attached disks

The system is coming up.  Please wait.

starting rpc services: rpcbind done.

Setting netmask of lo0:1 to 192.255.255.255

Setting netmask of hme0 to 192.255.255.0

Setting default IPv4 interface for multicast: add net 192.0/4:

gateway node1

syslog service starting.

obtaining access to all attached disks

Configuring the /dev/global directory (global devices)

Apr 20 14:36:55 sc3sconf1-n1 cl_runtime: NOTICE: CMM: Node tn1 (nodeid =

2) with votecount = 0 added.

Apr 20 14:36:55 sc3sconf1-n1 cl_runtime: NOTICE: CMM: Cluster members:

Apr 20 14:36:41 sc3sconf1-n1 xntpd[288]: couldn't resolve `clusternode2-

priv', giving up on it

sc3sconf1-n1.

Apr 20 14:36:55 sc3sconf1-n1 cl_runtime: NOTICE: CMM: node reconfiguration

#2 completed.

Apr 20 14:36:56 sc3sconf1-n1 cl_runtime: NOTICE: clcomm: Adapter qfe0

constructed

Apr 20 14:36:56 sc3sconf1-n1 cl_runtime: NOTICE: clcomm: Path sc3sconf1-n10:qfe0 -

tn1:qfe0 being constructed

Apr 20 14:36:57 sc3sconf1-n1 cl_runtime: NOTICE: clcomm: Adapter qfe4

constructed

Apr 20 14:36:57 sc3sconf1-n1 cl_runtime: NOTICE: clcomm: Path sc3sconf1-n1:qfe4 -

tn1:qfe4 being constructed

Apr 20 14:37:38 sc3sconf1-n1 qfe: SUNW,qfe0: 100 Mbps full duplex link up

- internal  transceiver

Apr 20 14:37:38 sc3sconf1-n1 qfe: SUNW,qfe4: 100 Mbps full duplex link up

- internal  transceiver

Apr 20 14:37:47 sc3sconf1-n1 cl_runtime: WARNING: Path sc3sconf1-n1:qfe0 - tn1:qfe0

initiation encountered errors, errno = 62. Remote node may be down

or unreachable through this path.

Apr 20 14:37:47 sc3sconf1-n1 cl_runtime: NOTICE: clcomm: Path sc3sconf1-n1:qfe0 -

tn1:qfe0 errors during initiation

Apr 20 14:37:47 sc3sconf1-n1 cl_runtime: NOTICE: clcomm: Path sc3sconf1-n1:qfe4 -

tn1:qfe4 errors during initiation

Apr 20 14:37:47 sc3sconf1-n1 cl_runtime: WARNING: Path sc3sconf1-n1:qfe4 - tn1:qfe4

initiation encountered errors, errno = 62. Remote node may be down

or unreachable through this path.

obtaining access to all attached disks

Print services started.

d1: submirror d3 is attached

d5: submirror d7 is attached

d10: submirror d12 is attached

volume management starting.

The system is ready.

sc3sconf1-n1 console login:

removing /etc/rc2.d/S94n0-sds-mirror script...