# Makefile.in generated automatically by automake 1.4 from Makefile.am

# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.


SHELL = @SHELL@

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@

bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include

DESTDIR =

pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@

top_builddir = ..

ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@

INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@

NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_alias = @host_alias@
host_triplet = @host@
AA = @AA@
AS = @AS@
CC = @CC@
CPP = @CPP@
DLLTOOL = @DLLTOOL@
EMACS = @EMACS@
GIMPDOCS = @GIMPDOCS@
GIMP_MAJOR_VERSION = @GIMP_MAJOR_VERSION@
GIMP_MICRO_VERSION = @GIMP_MICRO_VERSION@
GIMP_MINOR_VERSION = @GIMP_MINOR_VERSION@
GIMP_VERSION = @GIMP_VERSION@
GTK_CFLAGS = @GTK_CFLAGS@
GTK_CONFIG = @GTK_CONFIG@
GTK_LIBS = @GTK_LIBS@
JPEG = @JPEG@
LD = @LD@
LIBAA_LIB = @LIBAA_LIB@
LIBJPEG_LIB = @LIBJPEG_LIB@
LIBMPEG_LIB = @LIBMPEG_LIB@
LIBPNG_LIB = @LIBPNG_LIB@
LIBTIFF_LIB = @LIBTIFF_LIB@
LIBTOOL = @LIBTOOL@
LIBUCB_LIB = @LIBUCB_LIB@
LIBXDELTA_LIB = @LIBXDELTA_LIB@
LIBXMU_LIB = @LIBXMU_LIB@
LIBXPM_LIB = @LIBXPM_LIB@
LN_S = @LN_S@
LPC_COMMAND = @LPC_COMMAND@
LPC_DEF = @LPC_DEF@
LPR_COMMAND = @LPR_COMMAND@
LPR_DEF = @LPR_DEF@
LPSTAT_COMMAND = @LPSTAT_COMMAND@
LPSTAT_DEF = @LPSTAT_DEF@
LP_COMMAND = @LP_COMMAND@
LP_DEF = @LP_DEF@
MAILER = @MAILER@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MPEG = @MPEG@
NM = @NM@
PACKAGE = @PACKAGE@
PNG = @PNG@
RANLIB = @RANLIB@
SENDMAIL = @SENDMAIL@
TIFF = @TIFF@
USE_SYMBOL_UNDERSCORE = @USE_SYMBOL_UNDERSCORE@
VERSION = @VERSION@
WEBBROWSER = @WEBBROWSER@
XD = @XD@
XPM = @XPM@
X_CFLAGS = @X_CFLAGS@
X_LIBS = @X_LIBS@
brushdata = @brushdata@
gimpdatadir = @gimpdatadir@
gimpdir = @gimpdir@
gimpplugindir = @gimpplugindir@
gradientdata = @gradientdata@
palettedata = @palettedata@
patterndata = @patterndata@

SUBDIRS = white-paper

EXTRA_DIST =  	gimp.txt	 		pdb_self_doc.el 	pdb_dump 			xcf.doc 	cheat_sheet.txt			keybindings.txt 	texinfo.tex 			script-fu.tex 	architecture.eps	 	logo.eps 	net-fu.eps 			timeline.eps 	pdb_dump.texi			gimp_quick_reference.ps 	gimp_quick_reference.tar.gz


BUILT_SOURCES = pdb_dump.texi

info_TEXINFOS = pdb.texi
pdb_TEXINFOS = pdb_dump.texi
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = ../config.h
CONFIG_CLEAN_FILES = 
TEXI2DVI = texi2dvi
INFO_DEPS = pdb.info
DVIS = pdb.dvi
TEXINFOS = pdb.texi
DIST_COMMON =  $(pdb_TEXINFOS) Makefile.am Makefile.in texinfo.tex


DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)

TAR = tar
GZIP_ENV = --best
all: all-redirect
.SUFFIXES:
.SUFFIXES: .dvi .info .ps .texi .texinfo .txi
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
	cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/Makefile

Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
	cd $(top_builddir) \
	  && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status


pdb.info: pdb.texi $(pdb_TEXINFOS)
pdb.dvi: pdb.texi $(pdb_TEXINFOS)


DVIPS = dvips

.texi.info:
	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
	cd $(srcdir) \
	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`

.texi.dvi:
	TEXINPUTS=.:$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<

.texi:
	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
	cd $(srcdir) \
	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`

.texinfo.info:
	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
	cd $(srcdir) \
	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`

.texinfo:
	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
	cd $(srcdir) \
	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`

.texinfo.dvi:
	TEXINPUTS=.:$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<

.txi.info:
	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
	cd $(srcdir) \
	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`

.txi.dvi:
	TEXINPUTS=.:$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<

.txi:
	@cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
	cd $(srcdir) \
	  && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
.dvi.ps:
	$(DVIPS) $< -o $@

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(infodir)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  d=$(srcdir); \
	  for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
	    if test -f $$d/$$ifile; then \
	      echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; \
	      $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \
	    else : ; fi; \
	  done; \
	done
	@$(POST_INSTALL)
	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
	    install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
	  done; \
	else : ; fi

uninstall-info:
	$(PRE_UNINSTALL)
	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
	  ii=yes; \
	else ii=; fi; \
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  test -z "$ii" \
	    || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
	done
	@$(NORMAL_UNINSTALL)
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
	done

dist-info: $(INFO_DEPS)
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  d=$(srcdir); \
	  for file in `cd $$d && eval echo $$base*`; do \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file; \
	  done; \
	done

mostlyclean-aminfo:
	-rm -f pdb.aux pdb.cp pdb.cps pdb.dvi pdb.fn pdb.fns pdb.ky pdb.kys \
	  pdb.ps pdb.log pdb.pg pdb.toc pdb.tp pdb.tps pdb.vr pdb.vrs \
	  pdb.op pdb.tr pdb.cv pdb.cn

clean-aminfo:

distclean-aminfo:

maintainer-clean-aminfo:
	cd $(srcdir) && for i in $(INFO_DEPS); do \
	  rm -f $$i; \
	  if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \
	    rm -f $$i-[0-9]*; \
	  fi; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.

@SET_MAKE@

all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive  \
check-recursive installcheck-recursive info-recursive dvi-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
	  rev="$$subdir $$rev"; \
	  test "$$subdir" = "." && dot_seen=yes; \
	done; \
	test "$$dot_seen" = "no" && rev=". $$rev"; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP)
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	here=`pwd` && cd $(srcdir) \
	  && mkid -f$$here/ID $$unique $(LISP)

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
   if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
   fi; \
	done; \
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)

mostlyclean-tags:

clean-tags:

distclean-tags:
	-rm -f TAGS ID

maintainer-clean-tags:

distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)

subdir = docs

distdir: $(DISTFILES)
	here=`cd $(top_builddir) && pwd`; \
	top_distdir=`cd $(top_distdir) && pwd`; \
	distdir=`cd $(distdir) && pwd`; \
	cd $(top_srcdir) \
	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu docs/Makefile
	@for file in $(DISTFILES); do \
	  d=$(srcdir); \
	  if test -d $$d/$$file; then \
	    cp -pr $$/$$file $(distdir)/$$file; \
	  else \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file || :; \
	  fi; \
	done
	for subdir in $(SUBDIRS); do \
	  if test "$$subdir" = .; then :; else \
	    test -d $(distdir)/$$subdir \
	    || mkdir $(distdir)/$$subdir \
	    || exit 1; \
	    chmod 777 $(distdir)/$$subdir; \
	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info
info-am: $(INFO_DEPS)
info: info-recursive
dvi-am: $(DVIS)
dvi: dvi-recursive
check-am: all-am
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
install-exec-am:
install-exec: install-exec-recursive

install-data-am: install-info-am
install-data: install-data-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am: uninstall-info
uninstall: uninstall-recursive
all-am: Makefile $(INFO_DEPS)
all-redirect: all-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
	$(mkinstalldirs)  $(DESTDIR)$(infodir)


mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*

maintainer-clean-generic:
	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
mostlyclean-am:  mostlyclean-aminfo mostlyclean-tags mostlyclean-generic

mostlyclean: mostlyclean-recursive

clean-am:  clean-aminfo clean-tags clean-generic mostlyclean-am

clean: clean-recursive

distclean-am:  distclean-aminfo distclean-tags distclean-generic \
		clean-am
	-rm -f libtool

distclean: distclean-recursive

maintainer-clean-am:  maintainer-clean-aminfo maintainer-clean-tags \
		maintainer-clean-generic distclean-am
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-recursive

.PHONY: install-info-am uninstall-info mostlyclean-aminfo \
distclean-aminfo clean-aminfo maintainer-clean-aminfo \
install-data-recursive uninstall-data-recursive install-exec-recursive \
uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
all-recursive check-recursive installcheck-recursive info-recursive \
dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
install-exec install-data-am install-data install-am install \
uninstall-am uninstall all-redirect all-am all installdirs-am \
installdirs mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean


pdb_dump.texi: $(srcdir)/pdb_self_doc.el $(srcdir)/pdb_dump
	cd $(srcdir) && \
	@EMACS@ --batch -l pdb_self_doc.el -f make-docs-noargs

$(srcdir)/pdb_dump: $(top_srcdir)/app/*.c
	$(top_builddir)/app/gimp --no-interface --batch '(gimp-procedural-db-dump "pdb_dump.tmp")' '(gimp-quit 0)' 
	cp pdb_dump.tmp $(srcdir)/pdb_dump
	-rm -f pdb_dump.tmp

script-fu.ps: script-fu.dvi
	dvips -f script-fu.dvi > script-fu.ps

script-fu.dvi:
	latex script-fu.tex

files:
	@files=`ls $(DISTFILES) 2> /dev/null`; for p in $$files macros/*; do \
	  echo $$p; \
	done

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: