Skip Headers
Oracle® Services for Microsoft Transaction Server Developer's Guide
11g Release 1 (11.1) for Microsoft Windows

Part Number B28377-01
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
View PDF

3 Managing Recovery Scenarios

This chapter describes how to create and schedule Microsoft Transaction Server-related Oracle transaction recovery.

This chapter contains these topics:

3.1 Microsoft Transaction Server Configuration Requirements

You must configure the Microsoft Transaction Server and Oracle Database environments after installing or migrating Oracle Services for Microsoft Transaction Server (OraMTS).

Configuration is not required on the Windows computer if a Microsoft Transaction Server is installed on a computer.

To configure the Microsoft Transaction Server, perform the following tasks on the computer where the Oracle Database is installed:

  1. Run the oramtsadmin.sql script against the database to create the Microsoft Transaction Server administrative user account (the default username is mtssys).

  2. Schedule automatic transaction recovery.

    See "Scheduling Automatic Microsoft Transaction Server Transaction Recovery"

  3. If you have an Oracle Fail Safe configuration, modify the registry values before or after running the oramtsadmin.sql script.

    See "Modifying Registry Values for Oracle Fail Safe Configurations".

3.2 Microsoft Transaction Server Transaction Recovery Overview

Distributed transaction capabilities are required to use Microsoft Transaction Server with Oracle. Microsoft Transaction Server-related Oracle transactions become in-doubt transactions when any of the following fail:

An Oracle MTS Recovery Service resolves in-doubt transactions on the computer that started the failed transaction. An Oracle MTS Recovery Service is automatically installed with Oracle Services For Microsoft Transaction Server. Only one Oracle MTS Recovery Service can be installed for each computer. A scheduled recovery job on each Microsoft Transaction Server-enabled database permits the Oracle MTS Recovery Service to resolve in-doubt transactions.

The Oracle MTS Recovery Service resolves an in-doubt Microsoft Transaction Server transaction in the following order:

  1. The DBMS recovery job detects an in-doubt MTS-related transaction.

  2. The DBMS recovery job extracts the recovery service's endpoint address from the XID of the in-doubt transaction and requests the recovery service for the outcome of the MTS/MS DTC transaction.

  3. The recovery service requests its MS DTC for transaction outcome.

  4. The recovery service reports transaction outcome to the DBMS job process.

  5. The DBMS recovery job commits or terminates the in-doubt transaction.

3.3 Scheduling Automatic Microsoft Transaction Server Transaction Recovery

Automatic transaction recovery is performed by scheduling a database job. A database job for in-doubt transactions must be scheduled for each database participating in Microsoft Transaction Server transactions.

Transaction recovery is configured by running the oramtsadmin.sql script, which triggers utl_oramts.sql and prvtoramts.plb scripts to create the PL/SQL package utl_oramts. The database view oramts_2pc_pending is also created to show in-doubt transactions related to Microsoft Transaction Server transactions.

The oramtsadmin.sql script:

Schedule automatic transaction recovery in the database by performing these tasks:

3.3.1 Setting and Starting Up Database Job-Queue Processes

The JOB_QUEUE_PROCESSES initialization parameter specifies the number of job queue processes started in an instance.

To set and start up job-queue processes:

  1. Ensure that you have SYSDBA privileges.

  2. Go to the computer on which the Oracle Database is installed.

  3. Start SQL*Plus:

    C:\> sqlplus /NOLOG
    
    
  4. Connect to the database as SYSDBA:

    SQL> CONNECT / AS SYSDBA
    
    
  5. Set the JOB_QUEUE_PROCESSES initialization parameter:

    JOB_QUEUE_PROCESSES = 1
    
    

    The default value for this parameter is 0. Set this parameter to a value greater than 1 if there are many destinations to which to propagate the messages.

  6. Shut down the Oracle Database:

    SQL> SHUTDOWN
    
    
  7. Restart the Oracle Database:

    SQL> STARTUP
    
    
  8. Exit SQL*Plus:

    SQL> EXIT
    

3.3.2 Creating and Scheduling Automatic Transaction Recovery

The oramtsadmin.sql script creates the Microsoft Transaction Server administrator user account with the default username mtssys. The Microsoft Transaction Server transaction recovery jobs run under the administrator user account.

The oramtsadmin.sql script runs the utl_oramts.sql script to grant the following privileges and roles to the administrator user account:

  • CREATE SESSION role

  • SELECT_CATALOG_ROLE role

  • FORCE_ANY_TRANSACTION privilege

  • DBMS_JOBS package, on which EXECUTE privileges are granted

  • DBMS_TRANSACTION package, on which EXECUTE privileges are granted

To create and schedule automatic transaction recovery:

  1. Ensure that you have SYSDBA privileges.

  2. Log on to the computer where the Oracle Database is installed.

  3. Start SQL*Plus:

    C:\> sqlplus /NOLOG 
    
    
  4. Connect to the database as SYSDBA:

    SQL> CONNECT / AS SYSDBA
    
    
  5. Run the oramtsadmin.sql script:

    SQL> @ORACLE_BASE\ORACLE_HOME\oramts\admin\oramtsadmin.sql;
    
    

    You are prompted for the Microsoft Transaction Server administrator username and password. You can accept the default username of mtssys and password of mtssys, or change them.

  6. If you did change the password in step 5, you can change it using this script:

    SQL> ALTER USER USERNAME IDENTIFIED BY new_password;
    
    

    To change the username after completing this task, drop the user, rerun the oramtsadmin.sql script, and specify a different username when prompted.

  7. Exit SQL*Plus:

    SQL> EXIT
    
    

A single PL/SQL package, utl_oramts, is created in the Microsoft Transaction Server administrator's schema. utl_oramts exposes these public procedures and creates this view:

3.3.2.1 utl_oramts.show_indoubt Procedure

Use this procedure to view Microsoft Transaction Server in-doubt transactions in the database. This procedure uses the dbms_output package to display results.

Description This procedure requires SERVEROUTPUT set to ON.

SQL> SET SERVEROUTPUT ON

SQL> EXECUTE utl_oramts.show_indoubt;

The following information appears:

=========================================================
currently indoubt transactions
=========================================================
formatid        : 21255235
gtrid                   : C2229A505904974D81FB7316B147325900000000
bqual           : 5BAB6A6B55CD294AA20335839110829C0100000000901944700050
local txid      : 142.11.202
tx state                   : prepared
protocol        : HTTP
endpoint        : middletier-1@foo.com:2030
=========================================================
formatid        : 21255235
gtrid                   : 259DF9C8DFC5574F8876F0DF4E15CCAD00000000
bqual           : 2C8DCED5B9816244BA2B73CC013EEB870100000000901944700050
local txid      : 2.18.185
tx state        : prepared
protocol        : HTTP
endpoint        : middletier-2@foo.com:2030

3.3.2.2 utl_oramts.recover_automatic Procedure

This procedure is run by the transaction recovery job. An automatic database job is scheduled for utl_oramts.recover_automatic. When the job is run, it checks for unresolved global transactions in the database that are related to Microsoft Transaction Server. Information in the XIDs of the in-doubt transactions identifies the computer on which the transaction started. The Oracle MTS Recovery Service is contacted and resolves the transactions.

3.3.2.3 utl_oramts.forget_RMs Procedure

Use this procedure to request the transaction manager (MS DTC) to forget resolved transactions. This procedure is run by the post-recovery cleanup job.

3.3.2.4 oramts_2pc_pending View

The view oramts_2pc_pending is created by executing oramtsadmin.sql. oramts_2pc_pending shows in-doubt transactions in the database. This view consists of the following columns:

Formatid  This is the formatid of the global transaction in the database.

global_transaction_id  This is the transaction identifier of the Oracle global transaction corresponding to the Microsoft Transaction Server transaction. In fact, this is the globally unique identifier (GUID) of the Microsoft Transaction Server transaction.

branch_id This shows the branch identifier of the Oracle transaction. A single Microsoft Transaction Server transaction can have multiple Oracle global transactions. This depends on the number of Microsoft Transaction Server/COM+ components that span the same Microsoft Transaction Server transaction. All these transactions have the small global transaction identifier, but different branch identifiers.

local_tx_id A local Oracle transaction corresponds to each Microsoft Transaction Server transaction. This column shows the identifier corresponding to this local transaction.

state This shows the state of the transaction: pending, heuristically committed, heuristically terminated, and so on.

protocol This is the protocol that the transaction recovery job in the database uses to communicate with the Oracle MTS Recovery Service.

endpoint  This is the endpoint of the Windows computer on which the Microsoft Transaction Server transaction originated. For HTTP connections, this translates to a hostname and port number.

3.4 Viewing Microsoft Transaction Server In-Doubt Transactions

To view Microsoft Transaction Server–related in-doubt transactions in the database, use SQL*Plus to query the view oramts_2pc_pending:

  1. Start SQL*Plus with the Microsoft Transaction Server administrator user account:

    C:\> sqlplus mtsadmin_user/ mtsadmin_password
    
    
  2. Enter the following command:

    SQL> SELECT * FROM oramts_2pc_pending;
    
    

    This displays the computer on which the in-doubt transaction originated.

3.5 Modifying Registry Values for Oracle Fail Safe Configurations

In typical configurations, the MS DTC and Oracle MTS Recovery Service run on the same computer. This ensures that the required information for transaction recovery is available to the Oracle-Microsoft Transaction Server integration layer.

In configurations where the Microsoft Transaction Server application is part of a Windows cluster (for example, the application can fail over to another node or host in the cluster), the MS DTC runs as a cluster-wide resource. All cluster nodes use a single instance of the MS DTC running on any cluster node.

If you have an Oracle Fail Safe configuration, make sure the following registry information is replicated on all nodes in the cluster participating in Microsoft Transaction Server transactions:

To modify registry values for Oracle Fail Safe configurations:

  1. Go to the computer on which the MS DTC and Oracle MTS Recovery Service are installed.

  2. Start the registry from the command prompt:

    C:\> regedt32
    
    

    The Registry Editor window appears.

  3. Go to HKEY_LOCAL_MACHINE\Software\Oracle\OracleMTSRecoveryService.

  4. Copy the registry information appearing here to all nodes in the cluster.

  5. Reboot the computer on which you added the key.