Skip Headers
Oracle® Database SQLJ Developer's Guide and Reference
11g Release 1 (11.1)

Part Number B31227-01
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
View PDF

1 Getting Started

This chapter guides you through the basics of testing your Oracle SQLJ installation and configuration and running a simple application.

This chapter discusses the following topics:

Assumptions and Requirements

This section discusses basic assumptions about your environment and requirements of your system so that you can run SQLJ, covering the following topics:

Assumptions About Your Environment

The following assumptions are made about the system on which you will be running the Oracle SQLJ implementation:

  • You have a standard Java environment that is operational on your system. This would typically be using a Sun Microsystems Java Development Kit (JDK), but other implementations of Java will work. Ensure that you can run Java (typically java) and the Java compiler (typically javac).

    To translate and run SQLJ applications on a Sun JDK, you must use JDK 1.5.x or JDK 1.6.x. You must use the JDBC driver of the same version as that of SQLJ, can be thin or OCI8 driver

Note:

A Java run-time environment (JRE), such as the one installed with Oracle Database 11g, is not by itself sufficient for translating SQLJ programs. However, a JRE is sufficient for running SQLJ programs that have already been translated and compiled.

Requirements for Using the Oracle SQLJ Implementation

The following are required to use the Oracle SQLJ implementation:

  • A database system that is accessible using your JDBC driver

  • Class files for the SQLJ translator

    Translator-related classes are available in the following file:

    ORACLE_HOME/sqlj/lib/translator.jar

    Note:

    For more information about translator.jar, refer to "Set the Path and Classpath".
  • Class files for the SQLJ run time.

    ORACLE_HOME/sqlj/lib/runtime12.jar

    Note:

    runtime12ee.jar has been deprecated in Oracle Database 11g Release 1 (11.1). Use runtime12.jar instead.

SQLJ Environment

To ensure that you have a fully working environment, you must consider several aspects of your environment: SQLJ and its code generation mode, JDBC, and the JDK.

Note:

Code generation is determined by the SQLJ -codegen option. Refer to "Code Generation (-codegen)" for more information.

The following is a typical environment setup for Oracle-specific code generation:

  • SQLJ code generation: -codegen=oracle (default)

  • SQLJ translation library: translator.jar

  • SQLJ run time library: runtime12.jar

  • JDBC drivers: Oracle 11g release 1 (11.1)

  • JDK version: 1.5.x or 1.6.x

Note:

If you are running against different JDBC versions, then translate against the earlier version.

Environment Considerations

You can run the application against a JDK version that is at least as high as the version you translated the code under.

Note:

For more information about translator.jar, refer to "Set the Path and Classpath".

SQLJ Backward Compatibility

You must keep in mind the following points regarding backward compatibility of the Oracle SQLJ implementation:

  • Code generated with an earlier release of the SQLJ translator can continue to run and compile against current run time libraries. However, this is subject to the cross-compatibility limitations discussed in "Environment Considerations".

  • Oracle-specific translator output, that is, code generated with the default -codegen=oracle setting, must be created and executed using the runtime12.jar library. In addition:

    • Such code will be executable under future Oracle JDBC and SQLJ implementations.

    • Such code, however, will not be executable under earlier releases of Oracle JDBC drivers and the Oracle SQLJ run time. In these circumstances, you will have to retranslate the code.

Checking the Installation and Configuration

After you have verified that the preceding assumptions and requirements are satisfied, you must check your SQLJ installation. You must:

Check for Availability of SQLJ and Demo Applications

Following are the release-specific notes regarding availability of SQLJ and its demo applications:

Check for Installed Directories and Files

Verify that the following directories have been installed and are populated:

Directories for JDBC

Refer to the Oracle Database JDBC Developer's Guide and Reference for information about JDBC files that should be installed on your system.

Directories for SQLJ

Installing the Oracle Database 11g Java environment includes, among other things, installing a sqlj directory under your ORACLE_HOME directory. The sqlj directory contains the following subdirectories:

  • demo (demo applications, including some referenced in this chapter)

  • lib (.jar files containing class files for SQLJ)

Check whether all these directories have been created and populated, especially lib.

The ORACLE_HOME/bin directory contains utilities for all Java product areas, including the SQLJ and JPublisher executable files.

Set the Path and Classpath

Ensure that the PATH and CLASSPATH environment variables have the necessary settings for the Oracle SQLJ implementation. Set the PATH and CLASSPATH environment variables as follows for the Oracle SQLJ implementation:

  • Setting PATH

    To run the sqlj script, which invokes the SQLJ translator, without having to fully specify its path, verify that the PATH environment variable has been updated to include the following:

    ORACLE_HOME/bin
    
    

    Use backslash (\) for Microsoft Windows. Replace ORACLE_HOME with your actual Oracle home directory.

  • Setting CLASSPATH

    Update the CLASSPATH environment variable to include the current directory as well as the following:

    ORACLE_HOME/sqlj/lib/translator.jar
    
    

    Use backslash (\) for Microsoft Windows. Replace ORACLE_HOME with your actual Oracle home directory.

    Include the following run time library in the CLASSPATH:

    ORACLE_HOME/sqlj/lib/runtime12.jar
    
    

    In addition, you must include one of the following JDBC JARs in the CLASSPATH:

    ORACLE_HOME/jdbc/lib/ojdbc5*.jar
    ORACLE_HOME/jdbc/lib/ojdbc6*.jar
    
    

    Note:

    To translate or run SQLJ programs in JDK 1.5.x environment, you should have ojdbc5.jar in the classpath and to translate or run SQLJ programs in JDK 1.6.x environment, you should have ojdbc6.jar in the classpath. Ensure that the correct JDBC JAR is picked up at runtime for connecting to Oracle Database.

    Note:

    You will not be able to run the SQLJ translator if you do not add a run time library. You must specify a run time library as well as the translator library in the CLASSPATH.

    To see if SQLJ is installed correctly, and to see the version information for SQLJ, JDBC, and Java, run the following command:

    % sqlj -version-long
    
    

Verify Installation of the sqljutl Package

The sqljutl package is required for online checking of stored procedures and functions in Oracle Database instance. Beginning with Oracle8i Database release 8.1.5, it is installed automatically under the SYS schema during installation of the server-side Java virtual machine (JVM) for a Java-enabled database. If your database is not Java-enabled, then you will have to manually install this package.

If you want to verify the installation of sqljutl, then issue the following SQL command from SQL*Plus:

describe sys.sqljutl

This should result in a brief description of the package.

If you get a message indicating that the package cannot be found, or if you want to install an updated version of the package, then you can install it by using SQL*Plus to run the sqljutl.sql script (or sqljutl8.sql for Oracle8i Database), which is located at:

ORACLE_HOME/sqlj/lib/sqljutl.sql

Testing the Setup

You can test your database, JDBC, and SQLJ setup using demo applications defined in the following source files:

There is also a Java properties file, connect.properties, that helps you set up your database connection. You must edit this file to set appropriate user, password, and URL values.

The demo applications discussed here are provided with your SQLJ installation in the demo directory:

ORACLE_HOME/sqlj/demo

You may have to edit some of the source files and translate and compile them, as appropriate. The demo applications provided with the Oracle SQLJ implementation refer to tables on Oracle Database account with user name scott and password tiger. Most Oracle Database installations have this account. You can substitute other values for scott and tiger if desired.

Note:

Running the demo applications requires that the demo directory be the current directory, and that the current directory (".") should be specified in the CLASSPATH.

This section covers the following topics:

Set Up the Run Time Connection

This section describes how to update the connect.properties file to configure your Oracle connection for run time. The file is in the demo directory and looks something like the following:

Note:

In the Oracle Database 11g JDBC implementation, database URL connect strings using SIDs are deprecated. Following is an example, where orcl is the SID:
jdbc:oracle:thin:@localhost:1521:orcl

This would now generate a warning, but not a fatal error. Instead, you are encouraged to use database service names, such as myservice in the following example:

jdbc:oracle:thin:@localhost:1521/myservice

Refer to the Oracle Database JDBC Developer's Guide and Reference for information about database service names.

# Users should uncomment one of the following URLs or add their own.
# (If using Thin, edit as appropriate.)
#sqlj.url=jdbc:oracle:thin:@localhost:1521/myservice
#sqlj.url=jdbc:oracle:oci:@
#
# User name and password here
sqlj.user=scott
sqlj.password=tiger

Connecting with an Oracle JDBC Driver

Use oci in the connect string for the Oracle JDBC OCI driver in any new code. For backward compatibility, however, oci8 is still accepted. Therefore, you do not have to change existing code.

If you are using the JDBC Thin driver, then uncomment the thin URL line in connect.properties and edit it as appropriate for your Oracle connection. Use the same URL that was specified when your JDBC driver was set up.

Create a Table to Verify the Database

The following tests assume a table called SALES. Compile and run TestInstallCreateTable as follows:

% javac TestInstallCreateTable.java
% java TestInstallCreateTable

This will create the table for you if the database and the JDBC driver are working and the connection is set up properly in the connect.properties file.

Note:

If you already have a table called SALES in your schema and do not want it altered, edit TestInstallCreateTable.java to change the table name. Otherwise, your original table will be dropped and replaced.

If you do not want to use TestInstallCreateTable, then you can create the SALES table using the following SQL statement:

CREATE TABLE SALES (
      ITEM_NUMBER NUMBER,
      ITEM_NAME CHAR(30),
      SALES_DATE DATE, 
      COST NUMBER, 
      SALES_REP_NUMBER NUMBER,
      SALES_REP_NAME CHAR(20));

Verify the JDBC Driver

If you want to further test the Oracle JDBC driver, then use the TestInstallJDBC demo. Verify that your connection is set up properly in connect.properties. Then, compile and run TestInstallJDBC, as follows:

% javac TestInstallJDBC.java
% java TestInstallJDBC

The program should print:

Hello, JDBC! 

Verify the SQLJ Translator and Run Time

Now translate and run the TestInstallSQLJ demo, a SQLJ application that has functionality similar to that of TestInstallJDBC. Use the following command to translate the source:

% sqlj TestInstallSQLJ.sqlj

Note that this command also compiles the application.

On a UNIX environment, the sqlj script is in ORACLE_HOME/bin, which should already be in the PATH. On Windows, use the sqlj.exe executable in the bin directory. The SQLJ translator.jar file has the class files for the SQLJ translator and run time. It is located in ORACLE_HOME/sqlj/lib and should already be in the CLASSPATH.

Now run the application as follows:

% java TestInstallSQLJ

The program should print:

Hello, SQLJ!

Verify the SQLJ Translator Connection to the Database

If the SQLJ translator is able to connect to a database, then it can provide online semantics-checking of your SQL operations during translation. The SQLJ translator is written in Java and uses JDBC to get information it needs from a database connection that you specify. You provide the connection parameters for online semantics-checking using the sqlj script command line or using a SQLJ properties file, which is sqlj.properties by default.

While still in the demo directory, edit the sqlj.properties file and update, comment, or uncomment the sqlj.password, sqlj.url, and sqlj.driver lines, as appropriate, to reflect your database connection information. For assistance, refer to the comments in the sqlj.properties file.

Following is an example of what the appropriate driver, URL, and password settings might be if you are using the Oracle JDBC OCI driver.

sqlj.url=jdbc:oracle:oci:@
sqlj.driver=oracle.jdbc.OracleDriver
sqlj.password=tiger

Online semantics-checking is enabled as soon as you specify a user name for the translation-time connection. You can specify the user name either by uncommenting the sqlj.user line in the sqlj.properties file or by using the -user command-line option. The user, password, url, and driver options all can be set either on the command line or in the properties file.

You can test online semantics-checking by translating the TestInstallSQLJChecker.sqlj file located in the demo directory, as follows (or using another user name, if appropriate):

% sqlj -user=scott TestInstallSQLJChecker.sqlj

This should produce the following error message if you are using one of the Oracle JDBC drivers:

TestInstallSQLJChecker.sqlj:41: Warning: Unable to check SQL query. Error returned by database is: ORA-00904: 
invalid column name

Edit TestInstallSQLJChecker.sqlj to fix the error on line 41. The column name should be ITEM_NAME instead of ITEM_NAMAE. Once you make this change, you can translate and run the application without error using the following commands:

% sqlj -user=scott TestInstallSQLJChecker.sqlj
% java  TestInstallSQLJChecker

If everything works, then the following line is displayed:

Hello, SQLJ Checker!