Skip Headers
Oracle® Spatial Topology and Network Data Models Developer's Guide
11g Release 1 (11.1)

Part Number B28399-01
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
View PDF

6 SDO_NET Package Subprograms

The MDSYS.SDO_NET package contains subprograms (functions and procedures) for managing networks. To use the subprograms in this chapter, you must understand the conceptual information in Chapter 5.

For a listing of the subprograms grouped in logical categories, see Section 5.11.1. The rest of this chapter provides reference information about the subprograms, listed in alphabetical order.


SDO_NET.COMPUTE_PATH_GEOMETRY

Format

SDO_NET.COMPUTE_PATH_GEOMETRY(

     network IN VARCHAR2,

     path_id IN NUMBER,

     tolerance IN NUMBER

     ) RETURN SDO_GEOMETRY;

Description

Returns the spatial geometry for a path.

Parameters

network

Network name.

path_id

Path ID number.

tolerance

Tolerance value associated with geometries in the network. (Tolerance is explained in Chapter 1 of Oracle Spatial Developer's Guide.) This value should be consistent with the tolerance values of the geometries in the link table and node table for the network.

Usage Notes

This function computes and returns the SDO_GEOMETRY object for the specified path.

This function and the SDO_NET_MEM.PATH.COMPUTE_GEOMETRY procedure (documented in Chapter 6) both compute a path geometry, but they have the following differences:

Examples

The following example computes and returns the spatial geometry of the path with path ID 1 in the network named SDO_NET1, using a tolerance value of 0.005. The returned path geometry is a straight line from (1,1) to (15,1) because this path consists of a single link.

SELECT SDO_NET.COMPUTE_PATH_GEOMETRY('SDO_NET1', 1, 0.005) FROM DUAL;
 
SDO_NET.COMPUTE_PATH_GEOMETRY('SDO_NET1',1,0.005)(SDO_GTYPE, SDO_SRID, SDO_POINT
--------------------------------------------------------------------------------
SDO_GEOMETRY(2002, NULL, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY(
1, 1, 15, 1))

SDO_NET.COPY_NETWORK

Format

SDO_NET.COPY_NETWORK(

     source_network IN VARCHAR2,

     target_network IN VARCHAR2);

Description

Creates a copy of a network, including its metadata tables.

Parameters

source_network

Name of the network to be copied.

target_network

Name of the network to be created as a copy of source_network.

Usage Notes

This procedure creates an entry in the xxx_SDO_NETWORK_METADATA views (described in Section 5.10.1) for target_network that has the same information as for source_network, except for the new network name.

This procedure also creates a new node table, link table, and path table (if a path table exists for source_network) for target_network based on the metadata and data in these tables for source_network. These tables have names in the form <target-network>_NODE$, <target-network>_LINK$, and <target-network>_PATH$. For example, if target_network has the value ROADS_NETWORK2 and if source_network has a path table, the names of the created metadata tables are ROADS_NETWORK2_NODE$, ROADS_NETWORK2_LINK$, and ROADS_NETWORK2_PATH$.

Examples

The following example creates a new network named ROADS_NETWORK2 that is a copy of the network named ROADS_NETWORK.

EXECUTE SDO_NET.COPY_NETWORK('ROADS_NETWORK', 'ROADS_NETWORK2');

SDO_NET.CREATE_LINK_TABLE

Format

SDO_NET.CREATE_LINK_TABLE(

     table_name IN VARCHAR2,

     geom_type IN VARCHAR2,

     geom_column IN VARCHAR2,

     cost_column IN VARCHAR2,

     no_of_hierarchy_levels IN NUMBER);

Description

Creates a link table for a network.

Parameters

table_name

Name of the link table.

geom_type

For a spatial network, specify a value indicating the geometry type of links: SDO_GEOMETRY for non-LRS SDO_GEOMETRY objects, LRS_GEOMETRY for LRS SDO_GEOMETRY objects, or TOPO_GEOMETRY for SDO_TOPO_GEOMETRY objects.

geom_column

For a spatial network, the name of the column containing the geometry objects associated with the links.

cost_column

Name of the column containing the cost values to be associated with the links.

no_of_hierarchy_levels

Number of hierarchy levels for links in the network. (For an explanation of network hierarchy, see Section 5.5.)

Usage Notes

The link table is described in Section 5.9.2.

Examples

The following example creates a link table named ROADS_LINKS, with a geometry column named LINK_GEOMETRY that will contain LRS geometries, a cost column named COST, and a single hierarchy level.

EXECUTE SDO_NET.CREATE_LINK_TABLE('ROADS_LINKS', 'LRS_GEOMETRY', 'LINK_GEOMETRY', 'COST', 1);

SDO_NET.CREATE_LOGICAL_NETWORK

Format

SDO_NET.CREATE_LOGICAL_NETWORK(

     network IN VARCHAR2,

     no_of_hierarchy_levels IN NUMBER,

     is_directed IN BOOLEAN,

     node_with_cost IN BOOLEAN DEFAULT FALSE);

or

SDO_NET.CREATE_LOGICAL_NETWORK(

     network IN VARCHAR2,

     no_of_hierarchy_levels IN NUMBER,

     is_directed IN BOOLEAN,

     node_table_name IN VARCHAR2,

     node_cost_column IN VARCHAR2,

     link_table_name IN VARCHAR2,

     link_cost_column IN VARCHAR2,

     path_table_name IN VARCHAR2,

     path_link_table_name IN VARCHAR2);

Description

Creates a logical network, creates all necessary tables, and updates the network metadata.

Parameters

network

Network name.

no_of_hierarchy_levels

Number of hierarchy levels for links in the network. (For an explanation of network hierarchy, see Section 5.5.)

is_directed

A Boolean value. TRUE indicates that the links are directed; FALSE indicates that the links are undirected (not directed).

node_with_cost

A Boolean value. TRUE causes a column named COST to be included in the <network-name>_NODE$ table; FALSE (the default) causes a column named COST not to be included in the <network-name>_NODE$ table.

node_table_name

Name of the node table to be created. (The node table is explained in Section 5.9.1.) If you use the format that does not specify this parameter, a node table named <network-name>_NODE$ is created.

node_cost_column

Name of the cost column in the node table. (The node table is explained in Section 5.9.1.) If you use the format that does not specify this parameter, the geometry column is named COST.

link_table_name

Name of the link table to be created. (The link table is explained in Section 5.9.2.) If you use the format that does not specify this parameter, a link table named <network-name>_LINK$ is created.

link_cost_column

Name of the cost column in the link table. (The link table is explained in Section 5.9.2.) If you use the format that does not specify this parameter, the geometry column is named COST.

path_table_name

Name of the path table to be created. (The path table is explained in Section 5.9.3.) If you use the format that does not specify this parameter, a path table named <network-name>_PATH$ is created.

path_link_table_name

Name of the path-link table to be created. (The path-link table is explained in Section 5.9.4.) If you use the format that does not specify this parameter, a path-link table named <network-name>_PLINK$ is created.

Usage Notes

This procedure provides a convenient way to create a logical network when the node, link, and optional related tables do not already exist. The procedure creates the network; creates the node, link, path, and path-link tables for the network; and inserts the appropriate information in the xxx_SDO_NETWORK_METADATA views (described in Section 5.10.1).

An exception is generated if any of the tables to be created already exists.

The procedure has two formats. The simpler format creates the tables using default values for the table name and the cost column name. The other format lets you specify names for the tables and the cost column.

As an alternative to using this procedure, you can create the network using the SDO_NET.CREATE_LOGICAL_NETWORK procedure; create the tables using the SDO_NET.CREATE_NODE_TABLE, SDO_NET.CREATE_LINK_TABLE, SDO_NET.CREATE_PATH_TABLE, and SDO_NET.CREATE_PATH_LINK_TABLE procedures; and insert the appropriate row in the USER_SDO_NETWORK_METADATA view.

Examples

The following example creates a directed logical network named LOG_NET1. The example creates the LOG_NET1_NODE$, LOG_NET1_LINK$,LOG_NET1_PATH$, and LOG_NET1_PLINK$ tables, and updates the xxx_SDO_NETWORK_METADATA views. Both the node and link tables contain a cost column named COST.

EXECUTE SDO_NET.CREATE_LOGICAL_NETWORK('LOG_NET1', 1, TRUE, TRUE);

SDO_NET.CREATE_LRS_NETWORK

Format

SDO_NET.CREATE_LRS_NETWORK(

     network IN VARCHAR2,

     lrs_table_name IN VARCHAR2,

     lrs_geom_column IN VARCHAR2,

     no_of_hierarchy_levels IN NUMBER,

     is_directed IN BOOLEAN,

     node_with_cost IN BOOLEAN DEFAULT FALSE,

     is_complex IN BOOLEAN DEFAULT FALSE);

or

SDO_NET.CREATE_LRS_NETWORK(

     network IN VARCHAR2,

     no_of_hierarchy_levels IN NUMBER,

     is_directed IN BOOLEAN,

     node_table_name IN VARCHAR2,

     node_cost_column IN VARCHAR2,

     link_table_name IN VARCHAR2,

     link_cost_column IN VARCHAR2,

     lrs_table_name IN VARCHAR2,

     lrs_geom_column IN VARCHAR2,

     path_table_name IN VARCHAR2,

     path_geom_column IN VARCHAR2,

     path_link_table_name IN VARCHAR2,

     is_complex IN BOOLEAN DEFAULT FALSE);

Description

Creates a spatial network containing LRS SDO_GEOMETRY objects, creates all necessary tables, and updates the network metadata.

Parameters

network

Network name.

lrs_table_name

Name of the table containing the LRS geometry column.

lrs_geom_column

Name of the column in lrs_table_name that contains LRS geometries (that is, SDO_GEOMETRY objects that include measure information for linear referencing).

is_directed

A Boolean value. TRUE indicates that the links are directed; FALSE indicates that the links are undirected (not directed).

no_of_hierarchy_levels

Number of hierarchy levels for links in the network. (For an explanation of network hierarchy, see Section 5.5.)

node_with_cost

A Boolean value. TRUE causes a column named COST to be included in the <network-name>_NODE$ table; FALSE (the default) causes a column named COST not to be included in the <network-name>_NODE$ table.

is_complex

Reserved for future use. Ignored for the current release.

node_table_name

Name of the node table to be created. (The node table is explained in Section 5.9.1.) If you use the format that does not specify this parameter, a node table named <network-name>_NODE$ is created.

node_cost_column

Name of the cost column in the node table. (The node table is explained in Section 5.9.1.) If you use the format that does not specify this parameter, the geometry column is named COST.

link_table_name

Name of the link table to be created. (The link table is explained in Section 5.9.2.) If you use the format that does not specify this parameter, a link table named <network-name>_LINK$ is created.

link_cost_column

Name of the cost column in the link table. (The link table is explained in Section 5.9.2.) If you use the format that does not specify this parameter, the geometry column is named COST.

path_table_name

Name of the path table to be created. (The path table is explained in Section 5.9.3.) If you use the format that does not specify this parameter, a path table named <network-name>_PATH$ is created.

path_geom_column

Name of the geometry column in the path table. (The path table is explained in Section 5.9.3.) If you use the format that does not specify this parameter, the geometry column is named GEOMETRY.

path_link_table_name

Name of the path-link table to be created. (The path-link table is explained in Section 5.9.4.) If you use the format that does not specify this parameter, a path-link table named <network-name>_PLINK$ is created.

Usage Notes

This procedure provides a convenient way to create a spatial network of LRS geometries when the node, link, and optional related tables do not already exist. The procedure creates the network; creates the node, link, path, and path-link tables for the network; and inserts the appropriate information in the xxx_SDO_NETWORK_METADATA views (described in Section 5.10.1).

An exception is generated if any of the tables to be created already exists.

The procedure has two formats. The simpler format creates the tables using default values for the table name and the geometry and cost column names. The other format lets you specify names for the tables and the geometry and cost columns.

As an alternative to using this procedure, you can create the network using the SDO_NET.CREATE_LRS_NETWORK procedure; create the tables using the SDO_NET.CREATE_NODE_TABLE, SDO_NET.CREATE_LINK_TABLE, SDO_NET.CREATE_PATH_TABLE, and SDO_NET.CREATE_PATH_LINK_TABLE procedures; and insert the appropriate row in the USER_SDO_NETWORK_METADATA view.

Examples

The following example creates a directed spatial network named LRS_NET1. The LRS geometries are in the column named LRS_GEOM in the table named LRS_TAB. The example creates the LRS_NET1_NODE$, LRS_NET1_LINK$, LRS_NET1_PATH$, and LRS_NET1_PLINK$ tables, and updates the xxx_SDO_NETWORK_METADATA views. All geometry columns are named GEOMETRY. Both the node and link tables contain a cost column named COST.

EXECUTE SDO_NET.CREATE_LRS_NETWORK('LRS_NET1', 'LRS_TAB', 'LRS_GEOM', 1, TRUE, TRUE);

SDO_NET.CREATE_LRS_TABLE

Format

SDO_NET.CREATE_LRS_TABLE(

     table_name IN VARCHAR2,

     geom_column IN VARCHAR2);

Description

Creates a table for storing Oracle Spatial linear referencing system (LRS) geometries.

Parameters

table_name

Name of the table containing the geometry column specified in geom_column.

geom_column

Name of the column (of type SDO_GEOMETRY) to contain geometry objects.

Usage Notes

This procedure creates a table named table_name with two columns: GEOM_ID of type NUMBER and geom_column of type SDO_GEOMETRY.

Although the created table does not need to be used to store LRS geometries, the procedure is intended as a convenient method for creating a table to store such geometries. You will probably want to modify the table to add other columns before you store data in the table.

Examples

The following example creates a table named HIGHWAYS with a geometry column named GEOM.

EXECUTE SDO_NET.CREATE_LRS_TABLE('HIGHWAYS', 'GEOM');
 
PL/SQL procedure successfully completed.
 
DESCRIBE highways
 Name                                      Null?    Type
 ----------------------------------------- -------- ----------------------------
 GEOM_ID                                   NOT NULL NUMBER
 GEOM                                               MDSYS.SDO_GEOMETRY

SDO_NET.CREATE_NODE_TABLE

Format

SDO_NET.CREATE_NODE_TABLE(

     table_name IN VARCHAR2,

     geom_type IN VARCHAR2,

     geom_column IN VARCHAR2,

     cost_column IN VARCHAR2,

     no_of_hierarchy_levels IN NUMBER,

     is_complex IN BOOLEAN DEFAULT FALSE,

     storage_parameters IN VARCHAR2 DEFAULT NULL);

or

SDO_NET.CREATE_NODE_TABLE(

     table_name IN VARCHAR2,

     geom_type IN VARCHAR2,

     geom_column IN VARCHAR2,

     cost_column IN VARCHAR2,

     partition_column IN VARCHAR2,

     no_of_hierarchy_levels IN NUMBER,

     is_complex IN BOOLEAN DEFAULT FALSE,

     storage_parameters IN VARCHAR2 DEFAULT NULL);

Description

Creates a node table.

Parameters

table_name

Name of the node table.

geom_type

For a spatial network, specify a value indicating the geometry type of nodes: SDO_GEOMETRY for non-LRS SDO_GEOMETRY objects, LRS_GEOMETRY for LRS SDO_GEOMETRY objects, or TOPO_GEOMETRY for SDO_TOPO_GEOMETRY objects.

geom_column

For a spatial network, the name of the column containing the geometry objects associated with the nodes.

cost_column

Name of the column containing the cost values to be associated with the nodes.

partition_column

Name of the column containing the partition ID values to be associated with the nodes.

no_of_hierarchy_levels

Number of hierarchy levels for nodes in the network. (For an explanation of network hierarchy, see Section 5.5.)

is_complex

Reserved for future use. Ignored for the current release.

storage_parameters

Physical storage parameters used internally to create the <network-name>_NODE$ table (described in Section 5.9.1). Must be a valid string for use with the CREATE TABLE statement. For example: TABLESPACE tbs_3 STORAGE (INITIAL 100K NEXT 200K). If you do not specify this parameter, the default physical storage values are used.

Usage Notes

This procedure has two formats, one without the partition_column parameter and one with the partition_column parameter.

The node table is described in Section 5.9.1.

Examples

The following example creates a node table named ROADS_NODES with a geometry column named NODE_GEOMETRY that will contain LRS geometries, no cost column, and a single hierarchy level.

EXECUTE SDO_NET.CREATE_NODE_TABLE('ROADS_NODES', 'LRS_GEOMETRY', 'NODE_GEOMETRY', NULL, 1);

SDO_NET.CREATE_PARTITION_TABLE

Format

SDO_NET.CREATE_PARTITION_TABLE(

     table_name IN VARCHAR2);

Description

Creates a partition table.

Parameters

table_name

Name of the partition table.

Usage Notes

The partition table is described in Section 5.9.6.

For information about using partitioned networks to perform analysis using the load on demand approach, see Section 5.7.

Examples

The following example creates a partition table named MY_PART_TAB.

EXECUTE SDO_NET.CREATE_PARTITION_TABLE('MY_PART_TAB');

SDO_NET.CREATE_PATH_LINK_TABLE

Format

SDO_NET.CREATE_PATH_LINK_TABLE(

     table_name IN VARCHAR2);

Description

Creates a path-link table, that is, a table with a row for each link in each path in the path table.

Parameters

table_name

Name of the path-link table.

Usage Notes

The path-link table is described in Section 5.9.4.

To use paths with a network, you must populate the path-link table.

Examples

The following example creates a path-link table named ROADS_PATHS_LINKS.

EXECUTE SDO_NET.CREATE_PATH_LINK_TABLE('ROADS_PATHS_LINKS');

SDO_NET.CREATE_PATH_TABLE

Format

SDO_NET.CREATE_PATH_TABLE(

     table_name IN VARCHAR2,

     geom_column IN VARCHAR2);

Description

Creates a path table.

Parameters

table_name

Name of the path table.

geom_column

For a spatial network, name of the column containing the geometry objects associated with the paths.

Usage Notes

The path table is described in Section 5.9.3.

To use paths with a network, after you create the path table, you must create the path-link table using the SDO_NET.CREATE_PATH_LINK_TABLE procedure, and populate the path-link table.

Examples

The following example creates a path table named ROADS_PATHS that contains a geometry column named PATH_GEOMETRY.

EXECUTE SDO_NET.CREATE_PATH_TABLE('ROADS_PATHS', 'PATH_GEOMETRY');

SDO_NET.CREATE_SDO_NETWORK

Format

SDO_NET.CREATE_SDO_NETWORK(

     network IN VARCHAR2,

     no_of_hierarchy_levels IN NUMBER,

     is_directed IN BOOLEAN,

     node_with_cost IN BOOLEAN DEFAULT FALSE);

or

SDO_NET.CREATE_SDO_NETWORK(

     network IN VARCHAR2,

     no_of_hierarchy_levels IN NUMBER,

     is_directed IN BOOLEAN,

     node_table_name IN VARCHAR2,

     node_geom_column IN VARCHAR2,

     node_cost_column IN VARCHAR2,

     link_table_name IN VARCHAR2,

     link_geom_column IN VARCHAR2,

     link_cost_column IN VARCHAR2,

     path_table_name IN VARCHAR2,

     path_geom_column IN VARCHAR2,

     path_link_table_name IN VARCHAR2);

Description

Creates a spatial network containing non-LRS SDO_GEOMETRY objects, creates all necessary tables, and updates the network metadata.

Parameters

network

Network name.

no_of_hierarchy_levels

Number of hierarchy levels for links in the network. (For an explanation of network hierarchy, see Section 5.5.)

is_directed

A Boolean value. TRUE indicates that the links are directed; FALSE indicates that the links are undirected (not directed).

node_with_cost

A Boolean value. TRUE causes a column named COST to be included in the <network-name>_NODE$ table; FALSE (the default) causes a column named COST not to be included in the <network-name>_NODE$ table.

node_table_name

Name of the node table to be created. (The node table is explained in Section 5.9.1.) If you use the format that does not specify this parameter, a node table named <network-name>_NODE$ is created.

node_geom_column

Name of the geometry column in the node table. (The node table is explained in Section 5.9.1.) If you use the format that does not specify this parameter, the geometry column is named GEOMETRY.

node_cost_column

Name of the cost column in the node table. (The node table is explained in Section 5.9.1.) If you use the format that does not specify this parameter, the geometry column is named COST.

link_table_name

Name of the link table to be created. (The link table is explained in Section 5.9.2.) If you use the format that does not specify this parameter, a link table named <network-name>_LINK$ is created.

link_geom_column

Name of the geometry column in the link table. (The link table is explained in Section 5.9.2.) If you use the format that does not specify this parameter, the geometry column is named GEOMETRY.

link_cost_column

Name of the cost column in the link table. (The link table is explained in Section 5.9.2.) If you use the format that does not specify this parameter, the geometry column is named COST.

path_table_name

Name of the path table to be created. (The path table is explained in Section 5.9.3.) If you use the format that does not specify this parameter, a path table named <network-name>_PATH$ is created.

path_geom_column

Name of the geometry column in the path table. (The path table is explained in Section 5.9.3.) If you use the format that does not specify this parameter, the geometry column is named GEOMETRY.

path_link_table_name

Name of the path-link table to be created. (The path-link table is explained in Section 5.9.4.) If you use the format that does not specify this parameter, a path-link table named <network-name>_PLINK$ is created.

Usage Notes

This procedure provides a convenient way to create a spatial network when the node, link, and optional related tables do not already exist. The procedure creates the network; creates the node, link, path, and path-link tables for the network; and inserts the appropriate information in the xxx_SDO_NETWORK_METADATA views (described in Section 5.10.1).

An exception is generated if any of the tables to be created already exists.

The procedure has two formats. The simpler format creates the tables using default values for the table name and the geometry and cost column names. The other format lets you specify names for the tables and the geometry and cost columns.

As an alternative to using this procedure, you can create the network using the SDO_NET.CREATE_SDO_NETWORK procedure; create the tables using the SDO_NET.CREATE_NODE_TABLE, SDO_NET.CREATE_LINK_TABLE, SDO_NET.CREATE_PATH_TABLE, and SDO_NET.CREATE_PATH_LINK_TABLE procedures; and insert the appropriate row in the USER_SDO_NETWORK_METADATA view.

Examples

The following example creates a directed spatial network named SDO_NET1. The example creates the SDO_NET1_NODE$, SDO_NET1_LINK$, SDO_NET1_PATH$, and SDO_NET1_PLINK$ tables, and updates the xxx_SDO_NETWORK_METADATA views. All geometry columns are named GEOMETRY. Both the node and link tables contain a cost column named COST.

EXECUTE SDO_NET.CREATE_SDO_NETWORK('SDO_NET1', 1, TRUE, TRUE);

SDO_NET.CREATE_SUBPATH_TABLE

Format

SDO_NET.CREATE_PATH_TABLE(

     table_name IN VARCHAR2,

     geom_column IN VARCHAR2,

     storage_parameters IN VARCHAR2 DEFAULT NULL);

Description

Creates a subpath table.

Parameters

table_name

Name of the subpath table.

geom_column

For a spatial network, name of the column containing the geometry objects associated with the subpaths.

storage_parameters

Physical storage parameters used internally to create the subpath table (described in Section 5.9.1). Must be a valid string for use with the CREATE TABLE statement. For example: TABLESPACE tbs_3 STORAGE (INITIAL 100K NEXT 200K). If you do not specify this parameter, the default physical storage values are used.

Usage Notes

The subpath table is described in Section 5.9.5.

To use subpaths with a network, you must create one or more path tables and their associated path-link tables.

Examples

The following example creates a subpath table named ROADS_SUBPATHS that contains a geometry column named SUBPATH_GEOMETRY.

EXECUTE SDO_NET.CREATE_SUBPATH_TABLE('ROADS_SUBPATHS', 'SUBPATH_GEOMETRY');

SDO_NET.CREATE_TOPO_NETWORK

Format

SDO_NET.CREATE_TOPO_NETWORK(

     network IN VARCHAR2,

     no_of_hierarchy_levels IN NUMBER,

     is_directed IN BOOLEAN,

     node_with_cost IN BOOLEAN DEFAULT FALSE);

or

SDO_NET.CREATE_TOPO_NETWORK(

     network IN VARCHAR2,

     no_of_hierarchy_levels IN NUMBER,

     is_directed IN BOOLEAN,

     node_table_name IN VARCHAR2,

     node_cost_column IN VARCHAR2,

     link_table_name IN VARCHAR2,

     link_cost_column IN VARCHAR2,

     path_table_name IN VARCHAR2,

     path_geom_column IN VARCHAR2,

     path_link_table_name IN VARCHAR2);

Description

Creates a spatial topology network containing SDO_TOPO_GEOMETRY objects, creates all necessary tables, and updates the network metadata.

Parameters

network

Network name.

no_of_hierarchy_levels

Number of hierarchy levels for links in the network. (For an explanation of network hierarchy, see Section 5.5.)

is_directed

A Boolean value. TRUE indicates that the links are directed; FALSE indicates that the links are undirected (not directed).

node_with_cost

A Boolean value. TRUE causes a column named COST to be included in the <network-name>_NODE$ table; FALSE (the default) causes a column named COST not to be included in the <network-name>_NODE$ table.

node_table_name

Name of the node table to be created. (The node table is explained in Section 5.9.1.) If you use the format that does not specify this parameter, a node table named <network-name>_NODE$ is created.

node_cost_column

Name of the cost column in the node table. (The node table is explained in Section 5.9.1.) If you use the format that does not specify this parameter, the geometry column is named COST.

link_table_name

Name of the link table to be created. (The link table is explained in Section 5.9.2.) If you use the format that does not specify this parameter, a link table named <network-name>_LINK$ is created.

link_cost_column

Name of the cost column in the link table. (The link table is explained in Section 5.9.2.) If you use the format that does not specify this parameter, the geometry column is named COST.

path_table_name

Name of the path table to be created. (The path table is explained in Section 5.9.3.) If you use the format that does not specify this parameter, a path table named <network-name>_PATH$ is created.

path_geom_column

Name of the geometry column in the path table. (The path table is explained in Section 5.9.3.) If you use the format that does not specify this parameter, the geometry column is named GEOMETRY.

path_link_table_name

Name of the path-link table to be created. (The path-link table is explained in Section 5.9.4.) If you use the format that does not specify this parameter, a path-link table named <network-name>_PLINK$ is created.

Usage Notes

This procedure provides a convenient way to create a spatial network when the node, link, and optional related tables do not already exist. The procedure creates the network; creates the node, link, path, and path-link tables for the network; and inserts the appropriate information in the xxx_SDO_NETWORK_METADATA views (described in Section 5.10.1). The node and link tables contain a topology geometry column named TOPO_GEOMETRY of type SDO_TOPO_GEOMETRY.

An exception is generated if any of the tables to be created already exists.

The procedure has two formats. The simpler format creates the tables using default values for the table name and the geometry and cost column names. The other format lets you specify names for the tables and the geometry and cost columns.

As an alternative to using this procedure, you can create the network using the SDO_NET.CREATE_TOPO_NETWORK procedure; create the tables using the SDO_NET.CREATE_NODE_TABLE, SDO_NET.CREATE_LINK_TABLE, SDO_NET.CREATE_PATH_TABLE, and SDO_NET.CREATE_PATH_LINK_TABLE procedures; and insert the appropriate row in the USER_SDO_NETWORK_METADATA view.

Examples

The following example creates a directed spatial topology geometry network named TOPO_NET1. The example creates the TOPO_NET1_NODE$, TOPO_NET1_LINK$, TOPO_NET1_PATH$, and TOPO_NET1_PLINK$ tables, and updates the xxx_SDO_NETWORK_METADATA views. The topology geometry columns are named TOPO_GEOMETRY. Both the node and link tables contain a cost column named COST.

EXECUTE SDO_NET.CREATE_TOPO_NETWORK('TOPO_NET1', 1, TRUE, TRUE);

SDO_NET.DELETE_LINK

Format

SDO_NET.DELETE_LINK(

     network IN VARCHAR2,

     link_id IN NUMBER);

Description

Deletes a link and all dependent network elements.

Parameters

network

Network name.

link_id

ID of the link to delete.

Usage Notes

This procedure deletes the specified link from the link table (described in Section 5.9.2), and it deletes any other network elements that depend on this link. For example, if the specified link is included in any paths and subpaths, those paths and subpaths are deleted also.

Examples

The following example deletes the link in the SDO_NET2 network whose link ID is 1.

SELECT SDO_NET.DELETE_LINK('SDO_NET2', 1);

SDO_NET.DELETE_NODE

Format

SDO_NET.DELETE_NODE(

     network IN VARCHAR2,

     node_id IN NUMBER);

Description

Deletes a node and all dependent network elements.

Parameters

network

Network name.

node_id

ID of the node to delete.

Usage Notes

This procedure deletes the specified node from the node table (described in Section 5.9.1), and it deletes any other network elements that depend on this node. For example, if the specified node is included in any link definitions, those links are deleted; and if any of the deleted links are included in any paths and subpaths, those paths and subpaths are deleted also.

Examples

The following example deletes the node in the SDO_NET2 network whose node ID is 1.

SELECT SDO_NET.DELETE_NODE('SDO_NET2', 1);

SDO_NET.DELETE_PATH

Format

SDO_NET.DELETE_PATH(

     network IN VARCHAR2,

     path_id IN NUMBER);

Description

Deletes a path and all dependent network elements.

Parameters

network

Network name.

path_id

ID of the path to delete.

Usage Notes

This procedure deletes the specified path from the path table (described in Section 5.9.3), and it deletes any other network elements that depend on this link. For example, if the specified path has any subpaths, those subpaths are deleted also.

Examples

The following example deletes the path in the SDO_NET2 network whose path ID is 1.

SELECT SDO_NET.DELETE_PATH('SDO_NET2', 1);

SDO_NET.DELETE_SUBPATH

Format

SDO_NET.DELETE_SUBPATH(

     network IN VARCHAR2,

     path_id IN NUMBER);

Description

Deletes a subpath.

Parameters

network

Network name.

path_id

ID of the path to delete.

Usage Notes

This procedure deletes the specified subpath from the path table (described in Section 5.9.3). It does not delete any other network elements, because no other elements depend on a subpath definition.

Examples

The following example deletes the subpath in the SDO_NET2 network whose subpath ID is 17.

SELECT SDO_NET.DELETE_SUBPATH('SDO_NET2', 17);

SDO_NET.DEREGISTER_CONSTRAINT

Format

SDO_NET.DEREGISTER_CONSTRAINT(

     constraint_name IN VARCHAR2);

Description

Unloads (removes) the class for the specified network constraint from the Java repository in the database, and deletes the row for that constraint from the USER_SDO_NETWORK_CONSTRAINTS view (described in Section 5.10.2).

Parameters

constraint_name

Name of the network constraint. Must match a value in the CONSTRAINT column of the USER_SDO_NETWORK_CONSTRAINTS view.

Usage Notes

Use this procedure if you want to disable a network constraint that you had previously enabled, such as by using the SDO_NET.REGISTER_CONSTRAINTprocedure. For more information about network constraints, see Section 5.6.

This procedure is analogous to using the deregisterConstraint method of the NetworkManager class of the client-side Java API (described in Section 5.11.2).

Examples

The following example deregisters (disables) a network constraint named GivenProhibitedTurn.

EXECUTE SDO_NET.DEREGISTER_CONSTRAINT('GivenProhibitedTurn');

SDO_NET.DROP_NETWORK

Format

SDO_NET.DROP_NETWORK(

     network IN VARCHAR2);

Description

Drops (deletes) a network.

Parameters

network

Name of the network to be dropped.

Usage Notes

This procedure also deletes the node, link, and path tables associated with the network, and the network metadata for the network.

Examples

The following example drops the network named ROADS_NETWORK.

EXECUTE SDO_NET.DROP_NETWORK('ROADS_NETWORK');

SDO_NET.FIND_CONNECTED_COMPONENTS

Format

SDO_NET.FIND_CONNECTED_COMPONENTS(

     network IN VARCHAR2,

     link_level IN NUMBER,

     component_table_name IN VARCHAR2,

     log_loc IN VARCHAR2,

     log_file IN VARCHAR2,

     open_mode IN VARCHAR2);

Description

Finds all connected components for a specified link level in a network, and stores the information in the connected component table.

Parameters

network

Network name.

link_level

Link level for which to find connected components. Link level reflects the priority level for the link, and is used for network analysis, so that links with higher priority levels can be considered first in computing a path.

component_table_name

Name of the connected component table, which is created by this procedure. (If an existing table with the specified name already exists, it is replaced by a new table.) The connected component table is described in Section 5.9.8.

log_loc

Directory object that identifies the path for the log file. To create a directory object, use the SQL*Plus command CREATE DIRECTORY.

log_file

Log file containing information about Spatial network operations, including any possible errors or problems.

open_mode

A one-character code indicating the mode in which to open the log file: W for write over (that is, delete any existing log file at the specified location and name, and create a new file), or A for append (that is, append information to the existing specified log file). If you specify A and the log file does not exist, a new log file is created.

Usage Notes

This procedure finds, for each node in the specified network, information about all other nodes that are reachable from that node, and it stores the information in the specified connected component table. Having this information in the table enables better performance for many network analysis operations.

Examples

The following example finds the connected components for link level 1 in the SDO_PARTITIONED network, and creates or updates the SDO_PARTITIONED_CONN_COMP_TAB table. Information about the operation is added (open_mode => 'a') to the sdo_partitioned.log file, located in the location associated with the directory object named LOG_DIR.

EXECUTE SDO_NET.FIND_CONNECTED_COMPONENTS(-
  network => 'SDO_PARTITIONED', -
  link_level => 1,-
  component_table_name => 'sdo_partitioned_conn_comp_tab',-
  log_loc => 'LOG_DIR', log_file=> 'sdo_partitioned.log',-
  open_mode => 'a');

SDO_NET.GENERATE_PARTITION_BLOB

Format

SDO_NET.GENERATE_PARTITION_BLOB(

     network IN VARCHAR2,

     link_level IN NUMBER,

     partition_id IN VARCHAR2,

     include_user_data IN BOOLEAN,

     log_loc IN VARCHAR2,

     log_file IN VARCHAR2,

     open_mode IN VARCHAR2);

Description

Generates a single binary large object (BLOB) representation for a specified partition associated with a specified link level in the network, and stores the information in the existing partition BLOB table.

Parameters

network

Network name.

link_level

Link level for links to be included in the BLOB.

partition_id

Partition ID number. Network elements associated with the specified combination of link level and partition ID are included in the generated BLOB.

include_user_data

TRUE if the BLOB should include any user data associated with the network elements represented in each BLOB, or FALSE if the BLOB should not include any user data.

log_loc

Directory object that identifies the path for the log file. To create a directory object, use the SQL*Plus command CREATE DIRECTORY.

log_file

Log file containing information about Spatial network operations, including any possible errors or problems.

open_mode

A one-character code indicating the mode in which to open the log file: W for write over (that is, delete any existing log file at the specified location and name, and create a new file), or A for append (that is, append information to the existing specified log file). If you specify A and the log file does not exist, a new log file is created.

Usage Notes

This procedure adds a single new BLOB or replaces a single existing BLOB in the partition BLOB table, which must have been previously created using the SDO_NET.GENERATE_PARTITION_BLOBS procedure.

One use for this procedure is to perform a relatively quick update of the BLOB for a desired partition in a network that contains multiple large partitions, as opposed to than updating the BLOBs for all partitions using the SDO_NET.GENERATE_PARTITION_BLOBS procedure.

Examples

The following example generates the partition BLOB for the partition associated with partition ID 1 and link level 1 in the SDO_PARTITIONED network, and adds or replaces the appropriate BLOB in the SDO_PARTITIONED_PART_BLOB_TAB table. Any user data associated with the network elements is also included. Information about the operation is added (open_mode => 'a') to the sdo_partitioned.log file, located in the location associated with the directory object named LOG_DIR.

EXECUTE SDO_NET.GENERATE_PARTITION_BLOB(-
  network => 'SDO_PARTITIONED', -
  link_level => 1,-
  partition_id => 1,-
  include_user_data => true,-
  log_loc => 'LOG_DIR', log_file=> 'sdo_partitioned.log',-
  open_mode => 'a');

SDO_NET.GENERATE_PARTITION_BLOBS

Format

SDO_NET.GENERATE_PARTITION_BLOBS(

     network IN VARCHAR2,

     link_level IN NUMBER,

     partition_blob_table_name IN VARCHAR2,

     include_user_data IN BOOLEAN,

     log_loc IN VARCHAR2,

     log_file IN VARCHAR2,

     open_mode IN VARCHAR2);

Description

Generates a binary large object (BLOB) representation for partitions associated with a specified link level in the network, and stores the information in the partition BLOB table.

Parameters

network

Network name.

link_level

Link level for links to be included in each BLOB. Link level reflects the priority level for the link, and is used for network analysis, so that links with higher priority levels can be considered first in computing a path.

partition_blob_table_name

Name of the partition BLOB table, which is created by this procedure. (If an existing table with the specified name already exists, it is replaced by a new table.) The partition BLOB table is described in Section 5.9.7.

include_user_data

TRUE if each BLOB should include any user data associated with the network elements represented in each BLOB, or FALSE if each BLOB should not include any user data.

log_loc

Directory object that identifies the path for the log file. To create a directory object, use the SQL*Plus command CREATE DIRECTORY.

log_file

Log file containing information about Spatial network operations, including any possible errors or problems.

open_mode

A one-character code indicating the mode in which to open the log file: W for write over (that is, delete any existing log file at the specified location and name, and create a new file), or A for append (that is, append information to the existing specified log file). If you specify A and the log file does not exist, a new log file is created.

Usage Notes

Generating partition BLOBs enables better performance for many network analysis operations, especially with large networks.

If the network is not partitioned, this procedure generates a single BLOB representing the entire network.

Do not confuse this procedure with SDO_NET.GENERATE_PARTITION_BLOB, which regenerates a single BLOB for a specified combination of link level and partition ID, and adds that information to the existing partition BLOB table.

Examples

The following example generates partition BLOBs for link level 1 in the SDO_PARTITIONED network, and creates or updates the SDO_PARTITIONED_PART_BLOB_TAB table. Any user data associated with the network elements is also included. Information about the operation is added (open_mode => 'a') to the sdo_partitioned.log file, located in the location associated with the directory object named LOG_DIR.

EXECUTE SDO_NET.GENERATE_PARTITION_BLOBS(-
  network => 'SDO_PARTITIONED', -
  link_level => 1,-
  partition_blob_table_name => 'sdo_partitioned_part_blob_tab',-
  include_user_data => true,-
  log_loc => 'LOG_DIR', log_file=> 'sdo_partitioned.log',-
  open_mode => 'a');

SDO_NET.GET_CHILD_LINKS

Format

SDO_NET.GET_CHILD_LINKS(

     network IN VARCHAR2,

     link_id IN NUMBER

     ) RETURN SDO_NUMBER_ARRAY;

Description

Returns the child links of a link.

Parameters

network

Network name.

link_id

ID of the link for which to return the child links.

Usage Notes

For information about parent and child nodes and links in a network hierarchy, see Section 5.5.

Examples

The following example returns the child links of the link in the XYZ_NETWORK network whose link ID is 1001.

SELECT SDO_NET.GET_CHILD_LINKS('XYZ_NETWORK', 1001) FROM DUAL;
 
SDO_NET.GET_CHILD_LINKS('XYZ_NETWORK',1001)                                     
--------------------------------------------------------------------------------
SDO_NUMBER_ARRAY(1108, 1109) 

SDO_NET.GET_CHILD_NODES

Format

SDO_NET.GET_CHILD_NODES(

     network IN VARCHAR2,

     node_id IN NUMBER

     ) RETURN SDO_NUMBER_ARRAY;

Description

Returns the child nodes of a node.

Parameters

network

Network name.

node_id

ID of the node for which to return the child nodes.

Usage Notes

For information about parent and child nodes and links in a network hierarchy, see Section 5.5.

Examples

The following example returns the child nodes of the node in the XYZ_NETWORK network whose node ID is 1.

SELECT SDO_NET.GET_CHILD_NODES('XYZ_NETWORK', 1) FROM DUAL;
 
SDO_NET.GET_CHILD_NODES('XYZ_NETWORK',1)                                        
--------------------------------------------------------------------------------
SDO_NUMBER_ARRAY(101, 102, 103, 104, 105, 106)

SDO_NET.GET_GEOMETRY_TYPE

Format

SDO_NET.GET_GEOMETRY_TYPE(

     network IN VARCHAR2

     ) RETURN VARCHAR2;

Description

Returns the geometry type for a spatial network.

Parameters

network

Network name.

Usage Notes

This function returns the value of the GEOMETRY_TYPE column for the network in the USER_SDO_NETWORK_METADATA view (see Table 5-9 in Section 5.10.1).

Examples

The following example returns the geometry type for the network named ROADS_NETWORK.

SELECT SDO_NET.GET_GEOMETRY_TYPE('ROADS_NETWORK') FROM DUAL;
 
SDO_NET.GET_GEOMETRY_TYPE('ROADS_NETWORK')                                      
--------------------------------------------------------------------------------
LRS_GEOMETRY 

SDO_NET.GET_IN_LINKS

Format

SDO_NET.GET_IN_LINKS(

     network IN VARCHAR2,

     node_id IN NUMBER

     ) RETURN SDO_NUMBER_ARRAY;

Description

Returns an array of link ID numbers of the inbound links to a node.

Parameters

network

Network name.

node_id

ID of the node for which to return the array of inbound links.

Usage Notes

For information about inbound links and related network data model concepts, see Section 5.3.

Examples

The following example returns an array of link ID numbers of the inbound links into the node whose node ID is 3 in the network named ROADS_NETWORK.

SELECT SDO_NET.GET_IN_LINKS('ROADS_NETWORK', 3) FROM DUAL;
 
SDO_NET.GET_IN_LINKS('ROADS_NETWORK',3)                                         
--------------------------------------------------------------------------------
SDO_NUMBER_ARRAY(102)

SDO_NET.GET_INVALID_LINKS

Format

SDO_NET.GET_INVALID_LINKS(

     network IN VARCHAR2

     ) RETURN SDO_NUMBER_ARRAY;

Description

Returns the invalid links in a network.

Parameters

network

Network name.

Usage Notes

This function returns an SDO_NUMBER_ARRAY object with a comma-delimited list of node ID numbers of invalid links in the specified network. If there are no invalid links, this function returns a null value.

Examples

The following example returns the invalid links in the SDO_PARTITIONED network.

SELECT SDO_NET.GET_INVALID_LINKS('SDO_PARTITIONED') FROM DUAL;

SDO_NET.GET_INVALID_NODES

Format

SDO_NET.GET_INVALID_NODES(

     network IN VARCHAR2

     ) RETURN SDO_NUMBER_ARRAY;

Description

Returns the invalid nodes in a network.

Parameters

network

Network name.

Usage Notes

This function returns an SDO_NUMBER_ARRAY object with a comma-delimited list of node ID numbers of invalid nodes in the specified network. If there are no invalid nodes, this function returns a null value.

Examples

The following example returns the invalid nodes in the SDO_PARTITIONED network.

SELECT SDO_NET.GET_INVALID_NODES('SDO_PARTITIONED') FROM DUAL;

SDO_NET.GET_INVALID_PATHS

Format

SDO_NET.GET_INVALID_PATHS(

     network IN VARCHAR2

     ) RETURN SDO_NUMBER_ARRAY;

Description

Returns the invalid paths in a network.

Parameters

network

Network name.

Usage Notes

This function returns an SDO_NUMBER_ARRAY object with a comma-delimited list of node ID numbers of invalid paths in the specified network. If there are no invalid paths, this function returns a null value.

Examples

The following example returns the invalid paths in the SDO_PARTITIONED network.

SELECT SDO_NET.GET_INVALID_PATHS('SDO_PARTITIONED') FROM DUAL;

SDO_NET.GET_ISOLATED_NODES

Format

SDO_NET.GET_ISOLATED_NODES(

     network IN VARCHAR2

     ) RETURN SDO_NUMBER_ARRAY;

Description

Returns the isolated nodes in a network.

Parameters

network

Network name.

Usage Notes

This function returns an SDO_NUMBER_ARRAY object with a comma-delimited list of node ID numbers of isolated nodes in the specified network. If there are no isolated nodes, this function returns a null value.

For a brief explanation of isolated nodes in a network, see Section 5.3.

Examples

The following example returns the isolated nodes in the SDO_PARTITIONED network.

SELECT SDO_NET.GET_ISOLATED_NODES('SDO_PARTITIONED') FROM DUAL;

SDO_NET.GET_LINK_COST_COLUMN

Format

SDO_NET.GET_LINK_COST_COLUMN(

     network IN VARCHAR2

     ) RETURN VARCHAR2;

Description

Returns the name of the link cost column for a network.

Parameters

network

Network name.

Usage Notes

This function returns the value of the LINK_COST_COLUMN column for the network in the USER_SDO_NETWORK_METADATA view (see Table 5-9 in Section 5.10.1).

Examples

The following example returns the name of the link cost column for the network named ROADS_NETWORK.

SELECT SDO_NET.GET_LINK_COST_COLUMN('ROADS_NETWORK') FROM DUAL;
 
SDO_NET.GET_LINK_COST_COLUMN('ROADS_NETWORK')                                   
--------------------------------------------------------------------------------
COST

SDO_NET.GET_LINK_DIRECTION

Format

SDO_NET.GET_LINK_DIRECTION(

     network IN VARCHAR2

     ) RETURN VARCHAR2;

Description

Returns the link direction for a network.

Parameters

network

Network name.

Usage Notes

This function returns the value of the LINK_DIRECTION column for the network in the USER_SDO_NETWORK_METADATA view (see Table 5-9 in Section 5.10.1).

Examples

The following example returns the link direction for the network named ROADS_NETWORK.

SELECT SDO_NET.GET_LINK_DIRECTION('ROADS_NETWORK') FROM DUAL;
 
SDO_NET.GET_LINK_DIRECTION('ROADS_NETWORK')                                     
--------------------------------------------------------------------------------
DIRECTED 

SDO_NET.GET_LINK_GEOM_COLUMN

Format

SDO_NET.GET_LINK_GEOM_COLUMN(

     network IN VARCHAR2

     ) RETURN VARCHAR2;

Description

Returns the name of the link geometry column for a spatial network.

Parameters

network

Network name.

Usage Notes

This function returns the value of the LINK_GEOM_COLUMN column for the network in the USER_SDO_NETWORK_METADATA view (see Table 5-9 in Section 5.10.1).

Examples

The following example returns the name of the link geometry column for the network named ROADS_NETWORK.

SELECT SDO_NET.GET_LINK_GEOM_COLUMN('ROADS_NETWORK') FROM DUAL;
 
SDO_NET.GET_LINK_GEOM_COLUMN('ROADS_NETWORK')                                   
--------------------------------------------------------------------------------
LINK_GEOMETRY

SDO_NET.GET_LINK_GEOMETRY

Format

SDO_NET.GET_LINK_GEOMETRY(

     network IN VARCHAR2,

     link_id IN NUMBER

     ) RETURN SDO_GEOMETRY;

Description

Returns the geometry associated with a link in a spatial network.

Parameters

network

Network name.

link_id

ID number of the link for which to return the geometry.

Usage Notes

None.

Examples

The following example returns the geometry associated with the link whose link ID is 103 in the network named ROADS_NETWORK.

SELECT SDO_NET.GET_LINK_GEOMETRY('ROADS_NETWORK', 103) FROM DUAL;
 
SDO_NET.GET_LINK_GEOMETRY('ROADS_NETWORK',103)(SDO_GTYPE, SDO_SRID, SDO_POINT(X,
--------------------------------------------------------------------------------
SDO_GEOMETRY(2002, NULL, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY(
8, 4, 12, 4)) 

SDO_NET.GET_LINK_TABLE_NAME

Format

SDO_NET.GET_LINK_TABLE_NAME(

     network IN VARCHAR2

     ) RETURN VARCHAR2;

Description

Returns the name of the link table for a network.

Parameters

network

Network name.

Usage Notes

This function returns the value of the LINK_TABLE_NAME column for the network in the USER_SDO_NETWORK_METADATA view (see Table 5-9 in Section 5.10.1).

Examples

The following example returns the name of the link table for the network named ROADS_NETWORK.

SELECT SDO_NET.GET_LINK_TABLE_NAME('ROADS_NETWORK') FROM DUAL;
 
SDO_NET.GET_LINK_TABLE_NAME('ROADS_NETWORK')                                    
--------------------------------------------------------------------------------
ROADS_LINKS  

SDO_NET.GET_LINKS_IN_PATH

Format

SDO_NET.GET_LINKS_IN_PATH(

     network IN VARCHAR2,

     path_id IN NUMBER

     ) RETURN SDO_NUMBER_ARRAY;

Description

Returns the links in a path.

Parameters

network

Network name.

path_id

ID of the path for which to return the links.

Usage Notes

For an explanation of links and paths, see Section 5.3.

Examples

The following example returns the link ID values of links in the path in the XYZ_NETWORK network whose path ID is 1.

SELECT SDO_NET.GET_CHILD_LINKS('XYZ_NETWORK', 1001) FROM DUAL;
 
SDO_NET.GET_CHILD_LINKS('XYZ_NETWORK',1001)                                     
--------------------------------------------------------------------------------
SDO_NUMBER_ARRAY(1108, 1109) 

SDO_NET.GET_LRS_GEOM_COLUMN

Format

SDO_NET.GET_LRS_GEOM_COLUMN(

     network IN VARCHAR2

     ) RETURN VARCHAR2;

Description

Returns the name of the LRS geometry column for a spatial network.

Parameters

network

Network name.

Usage Notes

This function returns the value of the LRS_GEOM_COLUMN column for the network in the USER_SDO_NETWORK_METADATA view (see Table 5-9 in Section 5.10.1).

Examples

The following example returns the name of the LRS geometry column for the network named ROADS_NETWORK.

SELECT SDO_NET.GET_LRS_GEOM_COLUMN('ROADS_NETWORK') FROM DUAL;
 
SDO_NET.GET_LRS_GEOM_COLUMN('ROADS_NETWORK')                                    
--------------------------------------------------------------------------------
ROAD_GEOM 

SDO_NET.GET_LRS_LINK_GEOMETRY

Format

SDO_NET.GET_LRS_LINK_GEOMETRY(

     network IN VARCHAR2,

     link_id IN NUMBER

     ) RETURN SDO_GEOMETRY;

Description

Returns the LRS geometry associated with a link in a spatial LRS network.

Parameters

network

Network name.

link_id

ID number of the link for which to return the geometry.

Usage Notes

None.

Examples

The following example returns the LRS geometry associated with the link whose link ID is 103 in the network named ROADS_NETWORK.

SELECT SDO_NET.GET_LRS_LINK_GEOMETRY('ROADS_NETWORK', 103) FROM DUAL;
 
SDO_NET.GET_LRS_LINK_GEOMETRY('ROADS_NETWORK',103)(SDO_GTYPE, SDO_SRID, SDO_POIN
--------------------------------------------------------------------------------
SDO_GEOMETRY(2002, NULL, NULL, SDO_ELEM_INFO_ARRAY(1, 2, 1), SDO_ORDINATE_ARRAY(
8, 4, 12, 4))

SDO_NET.GET_LRS_NODE_GEOMETRY

Format

SDO_NET.GET_LRS_NODE_GEOMETRY(

     network IN VARCHAR2,

     node_id IN NUMBER

     ) RETURN SDO_GEOMETRY;

Description

Returns the LRS geometry associated with a node in a spatial LRS network.

Parameters

network

Network name.

node_id

ID number of the node for which to return the geometry.

Usage Notes

None.

Examples

The following example returns the LRS geometry associated with the node whose node ID is 3 in the network named ROADS_NETWORK.

SELECT SDO_NET.GET_LRS_NODE_GEOMETRY('ROADS_NETWORK', 3) FROM DUAL;
 
SDO_NET.GET_LRS_NODE_GEOMETRY('ROADS_NETWORK',3)(SDO_GTYPE, SDO_SRID, SDO_POINT(
--------------------------------------------------------------------------------
SDO_GEOMETRY(2001, NULL, SDO_POINT_TYPE(8, 4, NULL), NULL, NULL)

SDO_NET.GET_LRS_TABLE_NAME

Format

SDO_NET.GET_LRS_TABLE_NAME(

     network IN VARCHAR2

     ) RETURN VARCHAR2;

Description

Returns the name of the table containing LRS geometries in a spatial LRS network.

Parameters

network

Network name.

Usage Notes

This function returns the value of the LRS_TABLE_NAME column for the network in the USER_SDO_NETWORK_METADATA view (see Table 5-9 in Section 5.10.1).

Examples

The following example returns the name of the table that contains LRS geometries for the network named ROADS_NETWORK.

SELECT SDO_NET.GET_LRS_TABLE_NAME('ROADS_NETWORK') FROM DUAL;
 
SDO_NET.GET_LRS_TABLE_NAME('ROADS_NETWORK')                                     
--------------------------------------------------------------------------------
ROADS 

SDO_NET.GET_NETWORK_TYPE

Format

SDO_NET.GET_NETWORK_TYPE(

     network IN VARCHAR2

     ) RETURN VARCHAR2;

Description

Returns the network type.

Parameters

network

Network name.

Usage Notes

This function returns the value of the NETWORK_TYPE column for the network in the USER_SDO_NETWORK_METADATA view (see Table 5-9 in Section 5.10.1).

Examples

The following example returns the network type for the network named ROADS_NETWORK.

SELECT SDO_NET.GET_NETWORK_TYPE('ROADS_NETWORK') FROM DUAL;
 
SDO_NET.GET_NETWORK_TYPE('ROADS_NETWORK')                                       
--------------------------------------------------------------------------------
Roadways

SDO_NET.GET_NO_OF_HIERARCHY_LEVELS

Format

SDO_NET.GET_NO_OF_HIERARCHY_LEVELS(

     network IN VARCHAR2

     ) RETURN NUMBER;

Description

Returns the number of hierarchy levels for a network.

Parameters

network

Network name.

Usage Notes

This function returns the value of the NO_OF_HIERARCHY_LEVELS column for the network in the USER_SDO_NETWORK_METADATA view (see Table 5-9 in Section 5.10.1).

For an explanation of network hierarchy, see Section 5.5.

Examples

The following example returns the number of hierarchy levels for the network named ROADS_NETWORK.

SELECT SDO_NET.GET_NO_OF_HIERARCHY_LEVELS('ROADS_NETWORK') FROM DUAL;
 
SDO_NET.GET_NO_OF_HIERARCHY_LEVELS('ROADS_NETWORK')                             
---------------------------------------------------                             
                                                  1

SDO_NET.GET_NO_OF_LINKS

Format

SDO_NET.GET_NO_OF_LINKS(

     network IN VARCHAR2

     ) RETURN NUMBER;

or

SDO_NET.GET_NO_OF_LINKS(

     network IN VARCHAR2,

     hierarchy_id IN NUMBER

     ) RETURN NUMBER;

Description

Returns the number of links for a network or a hierarchy level in a network.

Parameters

network

Network name.

hierarchy_id

Hierarchy level number for which to return the number of links.

Usage Notes

None.

Examples

The following example returns the number of links in the network named ROADS_NETWORK.

SELECT SDO_NET.GET_NO_OF_LINKS('ROADS_NETWORK') FROM DUAL;
 
SDO_NET.GET_NO_OF_LINKS('ROADS_NETWORK')                                        
----------------------------------------                                        
                                      10 

SDO_NET.GET_NO_OF_NODES

Format

SDO_NET.GET_NO_OF_NODES(

     network IN VARCHAR2

     ) RETURN NUMBER;

or

SDO_NET.GET_NO_OF_NODES(

     network IN VARCHAR2,

     hierarchy_id IN NUMBER

     ) RETURN NUMBER;

Description

Returns the number of nodes for a network or a hierarchy level in a network.

Parameters

network

Network name.

hierarchy_id

Hierarchy level number for which to return the number of nodes.

Usage Notes

For information about nodes and related concepts, see Section 5.3.

Examples

The following example returns the number of nodes in the network named ROADS_NETWORK.

SELECT SDO_NET.GET_NO_OF_NODES('ROADS_NETWORK') FROM DUAL;
 
SDO_NET.GET_NO_OF_NODES('ROADS_NETWORK')                                        
----------------------------------------                                        
                                       8

SDO_NET.GET_NODE_DEGREE

Format

SDO_NET.GET_NODE_DEGREE(

     network IN VARCHAR2,

     node_id IN NUMBER

     ) RETURN NUMBER;

Description

Returns the number of links to a node.

Parameters

network

Network name.

node_id

Node ID of the node for which to return the number of links.

Usage Notes

For information about node degree and related network data model concepts, see Section 5.3.

Examples

The following example returns the number of links to the node whose node ID is 3 in the network named ROADS_NETWORK.

SELECT SDO_NET.GET_NODE_DEGREE('ROADS_NETWORK', 3) FROM DUAL;
 
SDO_NET.GET_NODE_DEGREE('ROADS_NETWORK',3)                                      
------------------------------------------                                      
                                         3

SDO_NET.GET_NODE_GEOM_COLUMN

Format

SDO_NET.GET_NODE_GEOM_COLUMN(

     network IN VARCHAR2

     ) RETURN VARCHAR2;

Description

Returns the name of the geometry column for nodes in a spatial network.

Parameters

network

Network name.

Usage Notes

This function returns the value of the NODE_GEOM_COLUMN column for the network in the USER_SDO_NETWORK_METADATA view (see Table 5-9 in Section 5.10.1).

Examples

The following example returns the name of the geometry column for nodes in the network named ROADS_NETWORK.

SELECT SDO_NET.GET_NODE_GEOM_COLUMN('ROADS_NETWORK') FROM DUAL;
 
SDO_NET.GET_NODE_GEOM_COLUMN('ROADS_NETWORK')                                   
--------------------------------------------------------------------------------
NODE_GEOMETRY

SDO_NET.GET_NODE_GEOMETRY

Format

SDO_NET.GET_NODE_GEOMETRY(

     network IN VARCHAR2,

     node_id IN NUMBER

     ) RETURN SDO_GEOMETRY;

Description

Returns the LRS geometry associated with a node in a spatial network.

Parameters

network

Network name.

node_id

ID number of the node for which to return the geometry.

Usage Notes

None.

Examples

The following example returns the geometry associated with the node whose node ID is 3 in the network named ROADS_NETWORK.

SELECT SDO_NET.GET_NODE_GEOMETRY('ROADS_NETWORK', 3) FROM DUAL;
 
SDO_NET.GET_NODE_GEOMETRY('ROADS_NETWORK',3)(SDO_GTYPE, SDO_SRID, SDO_POINT(X, Y
--------------------------------------------------------------------------------
SDO_GEOMETRY(2001, NULL, SDO_POINT_TYPE(8, 4, NULL), NULL, NULL) 

SDO_NET.GET_NODE_IN_DEGREE

Format

SDO_NET.GET_NODE_IN_DEGREE(

     network IN VARCHAR2,

     node_id IN NUMBER

     ) RETURN NUMBER;

Description

Returns the number of inbound links to a node.

Parameters

network

Network name.

node_id

Node ID of the node for which to return the number of inbound links.

Usage Notes

For information about node degree and related network data model concepts, see Section 5.3.

Examples

The following example returns the number of inbound links to the node whose node ID is 3 in the network named ROADS_NETWORK.

SELECT SDO_NET.GET_NODE_IN_DEGREE('ROADS_NETWORK', 3) FROM DUAL;
 
SDO_NET.GET_NODE_IN_DEGREE('ROADS_NETWORK',3)                                   
---------------------------------------------                                   
                                            1

SDO_NET.GET_NODE_OUT_DEGREE

Format

SDO_NET.GET_NODE_OUT_DEGREE(

     network IN VARCHAR2,

     node_id IN NUMBER

     ) RETURN NUMBER;

Description

Returns the number of outbound links from a node.

Parameters

network

Network name.

node_id

Node ID of the node for which to return the number of outbound links.

Usage Notes

For information about node degree and related network data model concepts, see Section 5.3.

Examples

The following example returns the number of outbound links from the node whose node ID is 3 in the network named ROADS_NETWORK.

SELECT SDO_NET.GET_NODE_OUT_DEGREE('ROADS_NETWORK', 3) FROM DUAL;
 
SDO_NET.GET_NODE_OUT_DEGREE('ROADS_NETWORK',3)                                  
----------------------------------------------                                  
                                             2

SDO_NET.GET_NODE_TABLE_NAME

Format

SDO_NET.GET_NODE_TABLE_NAME(

     network IN VARCHAR2

     ) RETURN VARCHAR2;

Description

Returns the name of the table that contains the nodes in a spatial network.

Parameters

network

Network name.

Usage Notes

This function returns the value of the NODE_TABLE_NAME column for the network in the USER_SDO_NETWORK_METADATA view (see Table 5-9 in Section 5.10.1).

Examples

The following example returns the name of the table that contains the nodes in the network named ROADS_NETWORK.

SELECT SDO_NET.GET_NODE_TABLE_NAME('ROADS_NETWORK') FROM DUAL;
 
SDO_NET.GET_NODE_TABLE_NAME('ROADS_NETWORK')                                    
--------------------------------------------------------------------------------
ROADS_NODES

SDO_NET.GET_OUT_LINKS

Format

SDO_NET.GET_OUT_LINKS(

     network IN VARCHAR2,

     node_id IN NUMBER

     ) RETURN SDO_NUMBER_ARRAY;

Description

Returns an array of link ID numbers of the outbound links from a node.

Parameters

network

Network name.

node_id

ID of the node for which to return the array of outbound links.

Usage Notes

For information about outbound links and related network data model concepts, see Section 5.3.

Examples

The following example returns an array of link ID numbers of the outbound links from the node whose node ID is 3 in the network named ROADS_NETWORK.

SELECT SDO_NET.GET_OUT_LINKS('ROADS_NETWORK', 3) FROM DUAL;
 
SDO_NET.GET_OUT_LINKS('ROADS_NETWORK',3)                                        
--------------------------------------------------------------------------------
SDO_NUMBER_ARRAY(103, 201)

SDO_NET.GET_PARTITION_SIZE

Format

SDO_NET.GET_PARTITION_SIZE(

     network IN VARCHAR2,

     partition_id IN VARCHAR2,

     link_level IN NUMBER,

     include_user_data IN VARCHAR2,

     include_spatial_data IN VARCHAR2) RETURN NUMBER;

Description

Gets the estimated size (in bytes) for a specified combination of partition ID and link level.

Parameters

network

Network name.

partition_id

Partition ID number.

link_level

Link level.

include_user_data

TRUE if the size should include any user data associated with the network elements represented in each BLOB, or FALSE if the size should not include any user data.

include_spatial_data

TRUE if the size should include spatial geometry definitions associated with the network elements represented in each BLOB, or FALSE if the size should not include spatial geometry definitions.

Usage Notes

The returned size of a network partition is a rough estimate and might vary depending on the Java Virtual Machine and garbage collection.

For information about using partitioned networks to perform analysis using the load on demand approach, see Section 5.7.

Examples

The following example returns the number of bytes for the partition associated with partition ID 1 and link level 1 in the SDO_PARTITIONED network, not including any user data or spatial data.

SELECT SDO_NET.GET_PARTITION_SIZE('SDO_PARTITIONED', 1, 1, 'N', 'N') FROM DUAL;
 
SDO_NET.GET_PARTITION_SIZE('SDO_PARTITIONED',1,1,'FALSE','FALSE')
---------------------------------------------------------
                                                     5192

SDO_NET.GET_PATH_GEOM_COLUMN

Format

SDO_NET.GET_PATH_GEOM_COLUMN(

     network IN VARCHAR2

     ) RETURN VARCHAR2;

Description

Returns the name of the geometry column for paths in a spatial network.

Parameters

network

Network name.

Usage Notes

This function returns the value of the PATH_GEOM_COLUMN column for the network in the USER_SDO_NETWORK_METADATA view (see Table 5-9 in Section 5.10.1).

Examples

The following example returns the name of the geometry column for paths in the network named ROADS_NETWORK.

SELECT SDO_NET.GET_PATH_GEOM_COLUMN('ROADS_NETWORK') FROM DUAL;
 
SDO_NET.GET_PATH_GEOM_COLUMN('ROADS_NETWORK')                                   
--------------------------------------------------------------------------------
PATH_GEOMETRY

SDO_NET.GET_PATH_TABLE_NAME

Format

SDO_NET.GET_PATH_TABLE_NAME(

     network IN VARCHAR2

     ) RETURN VARCHAR2;

Description

Returns the name of the table that contains the paths in a spatial network.

Parameters

network

Network name.

Usage Notes

This function returns the value of the PATH_TABLE_NAME column for the network in the USER_SDO_NETWORK_METADATA view (see Table 5-9 in Section 5.10.1).

Examples

The following example returns the name of the table that contains the paths in the network named ROADS_NETWORK.

SELECT SDO_NET.GET_PATH_TABLE_NAME('ROADS_NETWORK') FROM DUAL;
 
SDO_NET.GET_PATH_TABLE_NAME('ROADS_NETWORK')                                    
--------------------------------------------------------------------------------
ROADS_PATHS 

SDO_NET.IS_HIERARCHICAL

Format

SDO_NET.IS_HIERARCHICAL(

     network IN VARCHAR2

     ) RETURN VARCHAR2;

Description

Returns the string TRUE if the network has more than one level of hierarchy; returns the string FALSE if the network does not have more than one level of hierarchy.

Parameters

network

Network name.

Usage Notes

For an explanation of network hierarchy, see Section 5.5.

Examples

The following example checks if the network named ROADS_NETWORK has more than one level of hierarchy.

SELECT SDO_NET.IS_HIERARCHICAL('ROADS_NETWORK') FROM DUAL;

SDO_NET.IS_HIERARCHICAL('ROADS_NETWORK')                                        
--------------------------------------------------------------------------------
TRUE   

SDO_NET.IS_LINK_IN_PATH

Format

SDO_NET.IS_LINK_IN_PATH(

     network IN VARCHAR2,

     path_id IN NUMBER,

     link_id IN NUMBER,

     ) RETURN VARCHAR2;

Description

Returns the string TRUE if the specified link is in the specified path; returns the string FALSE if the specified link is not in the specified path.

Parameters

network

Network name.

path_id

ID number of the path.

link_id

ID number of the link.

Usage Notes

You can use this function to check if a specific link is included in a specific path.

Examples

The following example checks if the link with link ID 1 is in the path with path ID 1 in the network named SDO_NET1.

SELECT SDO_NET.IS_LINK_IN_PATH('SDO_NET1', 1, 1) FROM DUAL;
 
SDO_NET.IS_LINK_IN_PATH('SDO_NET1',1,1)                                        
--------------------------------------------------------------------------------
TRUE

SDO_NET.IS_LOGICAL

Format

SDO_NET.IS_LOGICAL(

     network IN VARCHAR2

     ) RETURN VARCHAR2;

Description

Returns the string TRUE if the network is a logical network; returns the string FALSE if the network is not a logical network.

Parameters

network

Network name.

Usage Notes

A network can be a spatial network or a logical network, as explained in Section 5.3.

Examples

The following example checks if the network named ROADS_NETWORK is a logical network.

SELECT SDO_NET.IS_LOGICAL('ROADS_NETWORK') FROM DUAL;
 
SDO_NET.IS_LOGICAL('ROADS_NETWORK')                                             
--------------------------------------------------------------------------------
FALSE 

SDO_NET.IS_NODE_IN_PATH

Format

SDO_NET.IS_NODE_IN_PATH(

     network IN VARCHAR2,

     path_id IN NUMBER,

     link_id IN NUMBER,

     ) RETURN VARCHAR2;

Description

Returns the string TRUE if the specified node is in the specified path; returns the string FALSE if the specified node is not in the specified path.

Parameters

network

Network name.

path_id

ID number of the path.

node_id

ID number of the node.

Usage Notes

You can use this function to check if a specific node is included in a specific path.

Examples

The following example checks if the node with node ID 1 is in the path with path ID 1 in the network named SDO_NET1.

SELECT SDO_NET.IS_NODE_IN_PATH('SDO_NET1', 1, 1) FROM DUAL;
 
SDO_NET.IS_NODE_IN_PATH('SDO_NET1',1,1)                                        
--------------------------------------------------------------------------------
TRUE

SDO_NET.IS_SPATIAL

Format

SDO_NET.IS_SPATIAL(

     network IN VARCHAR2

     ) RETURN VARCHAR2;

Description

Returns the string TRUE if the network is a spatial network; returns the string FALSE if the network is not a spatial network.

Parameters

network

Network name.

Usage Notes

A network can be a spatial network or a logical network, as explained in Section 5.3.

You can further check for the geometry type of a spatial network by using the following functions: SDO_NET.LRS_GEOMETRY_NETWORK, SDO_NET.SDO_GEOMETRY_NETWORK, and SDO_NET.TOPO_GEOMETRY_NETWORK.

Examples

The following example checks if the network named ROADS_NETWORK is a spatial network.

SELECT SDO_NET.IS_SPATIAL('ROADS_NETWORK') FROM DUAL;
 
SDO_NET.IS_SPATIAL('ROADS_NETWORK')                                             
--------------------------------------------------------------------------------
TRUE

SDO_NET.LOAD_CONFIG

Format

SDO_NET.LOAD_CONFIG(

    file_directory IN VARCHAR2,

    file_name IN VARCHAR2);

Description

Loads (or reloads) the load on demand configuration, which is mainly partition cache configuration, from the specified XML file.

Parameters

file_directory

Directory object that identifies the path for the XML file. To create a directory object, use the SQL*Plus command CREATE DIRECTORY.

file_name

Name of the XML file containing the information to be loaded.

Usage Notes

A default configuration is provided for load on demand. You can use this procedure if you need to change the default configuration.

For information about configuring the load on demand environment, including the partition cache, see Section 5.7.3.

Examples

The following example loads the load on demand configuration from a specified XML file.

EXECUTE SDO_NET.LOAD_CONFIG('WORK_DIR', 'netlodcfg.xml');

SDO_NET.LRS_GEOMETRY_NETWORK

Format

SDO_NET.LRS_GEOMETRY_NETWORK(

     network IN VARCHAR2

     ) RETURN VARCHAR2;

Description

Returns the string TRUE if the network is a spatial network containing LRS geometries; returns the string FALSE if the network is not a spatial network containing LRS geometries.

Parameters

network

Network name.

Usage Notes

A network contains LRS geometries if the GEOMETRY_TYPE column in its entry in the USER_SDO_NETWORK_METADATA view contains the value LRS_GEOMETRY. (The USER_SDO_NETWORK_METADATA view is explained in Section 5.10.1.)

Examples

The following example checks if the network named ROADS_NETWORK is a spatial network containing LRS geometries.

SELECT SDO_NET.LRS_GEOMETRY_NETWORK('ROADS_NETWORK') FROM DUAL;
 
SDO_NET.LRS_GEOMETRY_NETWORK('ROADS_NETWORK')                                   
--------------------------------------------------------------------------------
TRUE

SDO_NET.NETWORK_EXISTS

Format

SDO_NET.NETWORK_EXISTS(

     network IN VARCHAR2

     ) RETURN VARCHAR2;

Description

Returns the string TRUE if the network exists; returns the string FALSE if the network does not exist.

Parameters

network

Network name.

Usage Notes

If you drop a network (using the SDO_NET.DROP_NETWORK procedure), the network no longer exists.

Examples

The following example checks if the network named ROADS_NETWORK exists.

SELECT SDO_NET.NETWORK_EXISTS('ROADS_NETWORK') FROM DUAL;
 
SDO_NET.NETWORK_EXISTS('ROADS_NETWORK')                                         
--------------------------------------------------------------------------------
TRUE 

SDO_NET.REGISTER_CONSTRAINT

Format

SDO_NET.REGISTER_CONSTRAINT(

     constraint_name IN VARCHAR2,

     class_name IN VARCHAR2,

     directory_name IN VARCHAR2,

     description IN VARCHAR2);

Description

Loads the compiled Java code for the specified network constraint into the Java class repository in the database, and loads the class name into the CLASS column of the USER_SDO_NETWORK_CONSTRAINTS view (described in Section 5.10.2).

Parameters

constraint_name

Name of the network constraint.

class_name

Fully qualified name (including the name of the package) of the class that implements the network constraint.

directory_name

Name of the directory object (created using the SQL statement CREATE DIRECTORY) that identifies the location of the class file created when you compiled the network constraint.

description

Description of the network constraint.

Usage Notes

Before you call this procedure, you must insert a row into the USER_SDO_NETWORK_CONSTRAINTS view, compile the code for the Java class that implements the network constraint, and use the CREATE DIRECTORY statement to create a directory object identifying the location of the compiled class. For more information about network constraints, see Section 5.6.

To delete the row for the constraint from the USER_SDO_NETWORK_CONSTRAINTS view and thus disable the constraint, use the SDO_NET.DEREGISTER_CONSTRAINT procedure.

This procedure is analogous to using the registerConstraint method of the NetworkManager class of the client-side Java API (described in Section 5.11.2).

Examples

The following example registers a network constraint named GivenProhibitedTurn.

-- Set up the network constraint.
REM
REM Create the geor_dir on the file system first.
REM
-- Connect as SYSTEM.
DECLARE 
  -- This is the directory that contains the CLASS file generated when you
  -- compiled the network constraint.
  geor_dir varchar2(1000) := 'C:\my_data\files81\PROTOTYPES\NETWORK_CONSTRAINT\PLSQL_EXAMPLE';
BEGIN 
  EXECUTE IMMEDIATE 'CREATE OR REPLACE DIRECTORY work_dir AS''' || geor_dir || ''''; 
END;
/
GRANT read,write on directory work_dir to net_con;
 
-- Connect as the user that will register the constraint. 
 
REM
REM Compile GivenProhibitedTurn before you register the constraint.
REM
BEGIN
  SDO_NET.REGISTER_CONSTRAINT('GivenProhibitedTurn', 
     'com/network/constraints/ProhibitedTurn',
     'WORK_DIR', 'This is a network constraint that '||
     'prohibits certain turns');
 
END;
/

SDO_NET.SDO_GEOMETRY_NETWORK

Format

SDO_NET.SDO_GEOMETRY_NETWORK(

     network IN VARCHAR2

     ) RETURN VARCHAR2;

Description

Returns the string TRUE if the network is a spatial network containing SDO geometries (spatial geometries without measure information); returns the string FALSE if the network is not a spatial network containing SDO geometries.

Parameters

network

Network name.

Usage Notes

A network contains SDO geometries if the GEOMETRY_TYPE column in its entry in the USER_SDO_NETWORK_METADATA view contains the value SDO_GEOMETRY. (The USER_SDO_NETWORK_METADATA view is explained in Section 5.10.1.)

Examples

The following example checks if the network named ROADS_NETWORK is a spatial network containing SDO geometries.

SELECT SDO_NET.SDO_GEOMETRY_NETWORK('ROADS_NETWORK') FROM DUAL;
 
SDO_NET.SDO_GEOMETRY_NETWORK('ROADS_NETWORK')                                   
--------------------------------------------------------------------------------
FALSE

SDO_NET.SET_LOGGING_LEVEL

Format

SDO_NET.SET_LOGGING_LEVEL(

     level IN NUMBER);

Description

Sets the minimum level of severity for messages to be displayed for network operations.

Parameters

level

Minimum severity level for messages to be displayed for network operations. Must be one of the numeric constants specified in the Usage Notes.

Usage Notes

All messages at the specified logging level and higher levels will be written. The logging levels, from highest to lowest, are:

SDO_NET.LOGGING_LEVEL_FATAL
SDO_NET.LOGGING_LEVEL_ERROR
SDO_NET.LOGGING_LEVEL_WARN
SDO_NET.LOGGING_LEVEL_INFO
SDO_NET.LOGGING_LEVEL_DEBUG
SDO_NET.LOGGING_LEVEL_FINEST

The logging level is the Java logging level from the underlying implementation of this function; therefore, to see the Java logging output on the console, execute the following statements beforehand:

SET SERVEROUTPUT ON;
EXECUTE DBMS_JAVA.SET_OUTPUT(10000);

Examples

The following example sets the logging level at SDO_NET.LOGGING_LEVEL_ERROR, which means that only messages with a severity of SDO_NET.LOGGING_LEVEL_ERROR or SDO_NET.LOGGING_LEVEL_FATAL will be displayed.

EXECUTE SDO_NET.SET_LOGGING_LEVEL(SDO_NET.LOGGING_LEVEL_ERROR);

SDO_NET.SET_MAX_JAVA_HEAP_SIZE

Format

SDO_NET.SET_MAX_JAVA_HEAP_SIZE(

     bytes IN NUMBER);

Description

Sets the Java maximum heap size for an application to run in an Oracle Java virtual machine.

Parameters

bytes

Number of bytes for the Java maximum heap size.

Usage Notes

If you encounter the java.lang.OutOfMemoryError exception, you can use this procedure to increase the maximum heap size.

If you specify a value greater than the system limit, the system limit is used.

Examples

The following example sets the Java maximum heap size to 536870912 (512 MB).

EXECUTE SDO_NET.SET_MAX_JAVA_HEAP_SIZE(536870912);

SDO_NET.SPATIAL_PARTITION

Format

SDO_NET.SPATIAL_PARTITION(

     network IN VARCHAR2,

     partition_table_name IN VARCHAR2,

     max_num_nodes IN NUMBER,

     log_loc IN VARCHAR2,

     log_file IN VARCHAR2,

     open_mode IN VARCHAR2,

     link_level IN NUMBER);

Description

Partitions a spatial network, and stores the information in the partition table.

Parameters

network

Network name.

link_level

Network link level on which to perform the partitioning. Link level reflects the priority level for the link, and is used for network analysis, so that links with higher priority levels can be considered first in computing a path.

partition_table_name

Name of the partition table, which is created by this procedure. (If an existing table with the specified name already exists, it is replaced by a new table.) The partition table is described in Section 5.9.6.

max_num_nodes

Maximum number of nodes to include in each partition. For example, if you specify 5000 and if the network contains 50,000 nodes, each partition will have 5000 or fewer nodes, and the total number of partitions will be 10 or higher.

log_loc

Directory object that identifies the path for the log file. To create a directory object, use the SQL*Plus command CREATE DIRECTORY.

log_file

Log file containing information about Spatial network operations, including any possible errors or problems.

open_mode

A one-character code indicating the mode in which to open the log file: W for write over (that is, delete any existing log file at the specified location and name, and create a new file), or A for append (that is, append information to the existing specified log file). If you specify A and the log file does not exist, a new log file is created.

Usage Notes

After you use this procedure to create the partitions, consider using the SDO_NET.GENERATE_PARTITION_BLOBS procedure, to enable better performance for many network analysis operations, especially with large networks.

Examples

The following example creates partitions for link level 1 in the MY_PARTITIONED_NET network, and creates the MY_PARTITIONED_NET_TAB table. The maximum number of nodes to be placed in any partition is 5000. Information about the operation is added (open_mode => 'a') to the sdo_partitioned.log file, located in the location associated with the directory object named LOG_DIR.

EXECUTE SDO_NET.SPATIAL_PARTITION(network => 'MY_PARTITIONED_NET', -
  partition_table_name => 'my_partitioned_net_tab',-
  max_num_nodes => 5000,-
  log_loc => 'LOG_DIR', log_file=> 'my_partitioned_net.log',-
  link_level => 1, open_mode => 'w');

SDO_NET.TOPO_GEOMETRY_NETWORK

Format

SDO_NET.TOPO_GEOMETRY_NETWORK(

     network IN VARCHAR2

     ) RETURN VARCHAR2;

Description

Returns the string TRUE if the network is a spatial network containing SDO_TOPO_GEOMETRY (topology geometry) objects; returns the string FALSE if the network is not a spatial network containing SDO_TOPO_GEOMETRY objects.

Parameters

network

Network name.

Usage Notes

A network contains SDO_TOPO_GEOMETRY objects if the GEOMETRY_TYPE column in its entry in the USER_SDO_NETWORK_METADATA view contains the value TOPO_GEOMETRY. (The USER_SDO_NETWORK_METADATA view is explained in Section 5.10.1.)

Examples

The following example checks if the network named ROADS_NETWORK is a spatial network containing SDO_TOPO_GEOMETRY objects.

SELECT SDO_NET.TOPO_GEOMETRY_NETWORK('ROADS_NETWORK') FROM DUAL;
 
SDO_NET.TOPO_GEOMETRY_NETWORK('ROADS_NETWORK')                                  
--------------------------------------------------------------------------------
FALSE

SDO_NET.VALIDATE_LINK_SCHEMA

Format

SDO_NET.VALIDATE_LINK_SCHEMA(

     network IN VARCHAR2

     ) RETURN VARCHAR2;

Description

Returns the string TRUE if the metadata relating to links in a network is valid; returns the string FALSE if the metadata relating to links in a network is not valid.

Parameters

network

Network name.

Usage Notes

This function checks the following for validity: table name, geometry column, and cost column for spatial networks; measure-related information for LRS networks; topology-related information for topology networks; and hierarchy-related information for hierarchical networks.

Examples

The following example checks the validity of the metadata related to links in the network named ROADS_NETWORK.

SELECT SDO_NET.VALIDATE_LINK_SCHEMA('ROADS_NETWORK') FROM DUAL;
 
SDO_NET.VALIDATE_LINK_SCHEMA('ROADS_NETWORK')                                   
--------------------------------------------------------------------------------
TRUE

SDO_NET.VALIDATE_LRS_SCHEMA

Format

SDO_NET.VALIDATE_LRS_SCHEMA(

     network IN VARCHAR2

     ) RETURN VARCHAR2;

Description

Returns the string TRUE if the metadata relating to LRS information in a network is valid; returns the string FALSE if the metadata relating to LRS information in a network is not valid.

Parameters

network

Network name.

Usage Notes

None.

Examples

The following example checks the validity of the metadata related to LRS information in the network named ROADS_NETWORK.

SELECT SDO_NET.VALIDATE_LRS_SCHEMA('ROADS_NETWORK') FROM DUAL;
 
SDO_NET.VALIDATE_LRS_SCHEMA('ROADS_NETWORK')                                    
--------------------------------------------------------------------------------
TRUE

SDO_NET.VALIDATE_NETWORK

Format

SDO_NET.VALIDATE_NETWORK(

     network IN VARCHAR2,

     check_data IN VARCHAR2 DEFAULT 'FALSE'

     ) RETURN VARCHAR2;

Description

Returns the string TRUE if the network is valid; returns the string FALSE if the network is not valid.

Parameters

network

Network name.

check_data

TRUE performs additional checks on the referential integrity of network data; FALSE (the default) performs basic checks, but not additional checks, on the referential integrity of network data.

Usage Notes

This function checks the metadata for the network and any applicable network schema structures (link, node, path, subpath, LRS). It performs basic referential integrity checks on the network data, and it optionally performs additional checks. If any errors are found, the function returns the string FALSE.

The checks performed by this function include the following:

Examples

The following example validates the network named LOG_NET1.

SELECT SDO_NET.VALIDATE_NETWORK('LOG_NET1') FROM DUAL;
 
SDO_NET.VALIDATE_NETWORK('LOG_NET1')
--------------------------------------------------------------------------------
TRUE

SDO_NET.VALIDATE_NODE_SCHEMA

Format

SDO_NET.VALIDATE_NODE_SCHEMA(

     network IN VARCHAR2

     ) RETURN VARCHAR2;

Description

Returns the string TRUE if the metadata relating to nodes in a network is valid; returns the string FALSE if the metadata relating to nodes in a network is not valid.

Parameters

network

Network name.

Usage Notes

This function checks the following for validity: table name, geometry column, and cost column for spatial networks; measure-related information for LRS networks; topology-related information for topology networks; and hierarchy-related information for hierarchical networks.

Examples

The following example checks the validity of the metadata related to nodes in the network named LOG_NET1.

SELECT SDO_NET.VALIDATE_NODE_SCHEMA('LOG_NET1') FROM DUAL;
 
SDO_NET.VALIDATE_NODE_SCHEMA('LOG_NET1')
--------------------------------------------------------------------------------
TRUE

SDO_NET.VALIDATE_PARTITION_SCHEMA

Format

SDO_NET.VALIDATE_PARTITION_SCHEMA(

     network IN VARCHAR2

     ) RETURN VARCHAR2;

Description

Returns the string TRUE if the metadata relating to partitions in a network is valid; returns the string FALSE if the metadata relating to partitions in a network is not valid.

Parameters

network

Network name.

Usage Notes

This function checks the validity of information in the partition table, which is described in Section 5.9.6.

Examples

The following example checks the validity of the metadata related to partitions in the network named SDO_PARTITIONED.

SELECT SDO_NET.VALIDATE_PARTITION_SCHEMA('SDO_PARTITIONED') FROM DUAL;
 
SDO_NET.VALIDATE_PARTITION_SCHEMA('SDO_PARTITIONED')
--------------------------------------------------------------------------------
TRUE

SDO_NET.VALIDATE_PATH_SCHEMA

Format

SDO_NET.VALIDATE_PATH_SCHEMA(

     network IN VARCHAR2

     ) RETURN VARCHAR2;

Description

Returns the string TRUE if the metadata relating to paths in a network is valid; returns the string FALSE if the metadata relating to paths in a network is not valid.

Parameters

network

Network name.

Usage Notes

This function checks the following for validity: table name, geometry column, and cost column for spatial networks; measure-related information for LRS networks; topology-related information for topology networks; and hierarchy-related information for hierarchical networks.

Examples

The following example checks the validity of the metadata related to paths in the network named ROADS_NETWORK.

SELECT SDO_NET.VALIDATE_PATH_SCHEMA('ROADS_NETWORK') FROM DUAL;
 
SDO_NET.VALIDATE_PATH_SCHEMA('ROADS_NETWORK')                                   
--------------------------------------------------------------------------------
TRUE

SDO_NET.VALIDATE_SUBPATH_SCHEMA

Format

SDO_NET.VALIDATE_SUBPATH_SCHEMA(

     network IN VARCHAR2

     ) RETURN VARCHAR2;

Description

Returns the string TRUE if the metadata relating to subpaths in a network is valid; returns the string FALSE if the metadata relating to subpaths in a network is not valid.

Parameters

network

Network name.

Usage Notes

This function checks the validity of information in the subpath table, which is described in Section 5.9.5.

Examples

The following example checks the validity of the metadata related to subpaths in the network named MY_NETWORK.

SELECT SDO_NET.VALIDATE_SUBPATH_SCHEMA('MY_NETWORK') FROM DUAL;
 
SDO_NET.VALIDATE_SUBPATH_SCHEMA('MY_NETWORK')
--------------------------------------------------------------------------------
TRUE