7 Package SOAP APIs for C

W3C: "SOAP is a lightweight protocol for exchange of information in a decentralized, distributed environment. It is an XML based protocol that consists of three parts: an envelope that defines a framework for describing what is in a message and how to process it, a set of encoding rules for expressing instances of application-defined datatypes, and a convention for representing remote procedure calls and responses."

Attachments are not allowed in Soap 1.1. In Soap 1.2, body may not have other elements if Fault is present.

The structure of a SOAP message is:

[SOAP message (XML document)
   [SOAP envelope
      [SOAP header?
            element*
      ]
      [SOAP body
           (element* | Fault)?
      ]
   ]
]

See Also:

Package SOAP Interfaces

Table 7-1 summarizes the methods of available through the SOAP package.

Table 7-1 Summary of SOAP Package Interfaces

Function	Summary
XmlSoapAddBodyElement()	Adds an element to a SOAP message body.
XmlSoapAddFaultReason()	Adds additional Reason to Fault.
XmlSoapAddFaultSubDetail()	Adds additional child to Fault Detail.
XmlSoapAddHeaderElement()	Adds an element to a SOAP header.
XmlSoapCall()	Sends a SOAP message then waits for a reply.
XmlSoapCreateConnection()	Creates a SOAP connection object.
XmlSoapCreateCtx()	Creates and return a SOAP context.
XmlSoapCreateMsg()	Creates and return an empty SOAP message.
XmlSoapDestroyConnection()	Destroys a SOAP connection object.
XmlSoapDestroyCtx()	Destroys a SOAP context.
XmlSoapDestroyMsg()	Destroys a SOAP message created with XmlSoapCreateMsg.
XmlSoapError()	Gets a human readable error code.
XmlSoapGetBody()	Return a SOAP message's envelope body.
XmlSoapGetBodyElement()	Gets an element from a SOAP body.
XmlSoapGetEnvelope()	Returns a SOAP part's envelope.
XmlSoapGetFault()	Returns Fault code, reason, and details.
XmlSoapGetHeader()	Returns a SOAP message's envelope header.
XmlSoapGetHeaderElement()	Gets an element from a SOAP header.
XmlSoapGetMustUnderstand()	Gets mustUnderstand attribute from SOAP header element.
XmlSoapGetReasonLang()	Gets the language of a reason with the specified index.
XmlSoapGetReasonNum()	Determines the number of reasons in Fault element.
XmlSoapGetRelay()	Gets Relay attribute from SOAP header element.
XmlSoapGetRole()	Gets role from SOAP header element.
XmlSoapHasFault()	Determines if SOAP message contains Fault object.
XmlSoapSetFault()	Sets Fault in SOAP message.
XmlSoapSetMustUnderstand()	Sets mustUnderstand attribute for SOAP header element.
XmlSoapSetRelay()	Sets Relay attribute for a SOAP header element.
XmlSoapSetRole()	Sets role for SOAP header element.

XmlSoapAddBodyElement()

Adds an element to a SOAP message body. Sets the numeric error code.

Syntax

xmlelemnode *XmlSoapAddBodyElement(
   xmlsoapctx *ctx, 
   xmldocnode *msg,
   oratext *qname,
   oratext *uri, 
   xmlerr *xerr);

Parameter	In/Out	Description
ctx	IN	SOAP context
msg	IN/OUT	SOAP message
qname	IN	QName of element to add
uri	IN	Namespace URI of element to add
xerr	IN/OUT	Error code

Returns

(xmlelemnode *) created element

See Also:

XmlSoapAddHeaderElement()

XmlSoapAddFaultReason()

Add additional Reason to Fault. The same reason text may be provided in different languages. When the fault is created, the primary language/reason is added at that time; use this function to add additional translations of the reason.

Syntax

xmlerr XmlSoapAddFaultReason(
   xmlsoapctx *ctx, 
   xmldocnode *msg,
   ratext *reason,
    oratext *lang);

Parameter	In/Out	Description
ctx	IN	SOAP context
msg	IN/OUT	SOAP message
reason	IN	Human-readable fault Reason
lang	IN	Language of reason

Returns

(xmlerr) numeric error code, XMLERR_OK [0] on success

See Also:

XmlSoapSetFault()

XmlSoapAddFaultSubDetail()

Adds an additional child to Fault Detail. XmlSoapSetFault allows for creation of a Deatail element with only one child. Extra children could be added with this function.

Syntax

xmlerr XmlSoapAddFaultSubDetail(
   xmlsoapctx *ctx, 
   xmldocnode *msg,
   xmlelemnode *sub);

Parameter	In/Out	Description
ctx	IN	SOAP context
msg	IN/OUT	SOAP message
sub	IN	subdetail tree

Returns

(xmlerr) numeric error code, XMLERR_OK [0] on success

See Also:

XmlSoapGetReasonLang()

XmlSoapAddHeaderElement()

Adds an element to a SOAP header.

Syntax

xmlelemnode *XmlSoapAddHeaderElement(
   xmlsoapctx *ctx, 
   xmldocnode *msg,
   oratext *qname,
   oratext *uri, 
   xmlerr *xerr);

Parameter	In/Out	Description
ctx	IN	SOAP context
msg	IN/OUT	SOAP message
qname	IN	QName of element to add
uri	IN	Namespace URI of element to add
xerr	IN/OUT	error code

Returns

(xmlelemnode *) created element

XmlSoapCall()

Send a SOAP message over a connection and wait for the response; the message reply (an XML document) is parsed and returned as a SOAP message (equivalent to a DOM).

The message buffer is first used to serialize the outgoing message; if it's too small (overflow occurs), xerr gets XMLERR_SAVE_OVERFLOW and NULL is returned. The same buffer is then re-used to receive the replied SOAP message.

Opening the connection object is expected to cause an active SOAP handler to appear on the end-point; how this happens is up to the user. For HTTP, the URL should invoke a cgi-bin, or detect the application/soap+xml content-type.

Syntax

xmldocnode *XmlSoapCall(
   xmlsoapctx *ctx, 
   xmlsoapcon *con,
   xmldocnode *msg, 
   xmlerr *xerr);

Parameter	In/Out	Description
ctx	IN	SOAP context
con	IN	SOAP connection object
msg	IN	SOAP message to send
xerr	IN	numeric code of failure

Returns

(xmldocnode *) returned message, or NULL on failure with xerr set

XmlSoapCreateConnection()

Create a SOAP connection object, specifying the binding (transport) and endpoint. The binding is an enum of type xmlsoapbind, and the endpoint depends on the binding.

Currently only HTTP binding is supported, and the endpoint is a URL. That URL should be active, i.e. a cgi-bin script or some mechanism to trigger SOAP message processing based on the Content-type of the incoming message ("application/soap+xml").

To control the HTTP access method (GET or POST), use the web-method property named XMLSOAP_PROP_WEB_METHOD which can have possible values XMLSOAP_WEB_METHOD_GET and XMLSOAP_WEB_METHOD_POST.

(conbuf, consiz) is the connection buffer used with LPU; for sending, it contains only the HTTP header, but on reception it holds the entire reply, including HTTP header and the full SOAP body. If no buffer is provided, one will be allocated for you. If size if zero, the default size (64K) will be used.

(msgbuf, msgsiz) is the message buffer used to form SOAP messages for sending. It needs to be large enough to contain the largest message which will be sent. If no buffer is specified, one will be allocated for you. If the size is zero, the default size (64K) will be used.

Two buffers are needed for sending since the SOAP message needs to be formed first in order to determine it's size; then, the HTTP header can be formed, since the Content-Length is now known.

Syntax

xmlsoapcon *XmlSoapCreateConnection(
   xmlsoapctx *ctx, 
   xmlerr *xerr,
   xmlsoapbind bind, 
   void *endp,
   oratext *conbuf, 
   ubig_ora consiz,
   oratext *msgbuf, 
   ubig_ora msgsiz, 
   ...);

Parameter	In/Out	Description
ctx	IN	SOAP context
xerr	OUT	numeric error code on failure
bind	IN	connection binding
endp	IN	connection endpoint
conbuf	IN/OUT	connection buffer (or `NULL` to have one allocated)
consiz	IN	size of connection buffer (or 0 for default size)
msgbuf	IN/OUT	message buffer (or `NULL` to have one allocated)
msgsiz	IN	size of message buffer (or 0 for default size)
...	IN	additional HTTP headers to set, followed by `NULL`

Returns

(xmlsoapcon *) connect object, or NULL on error with xerr set

XmlSoapCreateCtx()

Creates and returns a SOAP context. This context must be passed to all XmlSoap APIs. Note the name provided should be unique and is used to identify the context when debugging. Options are specified as (name, value) pairs, ending with a NULL, same as for XmlCreate. If no options are desired, the NULL is still needed. Options are: debug_level (enables SOAP debug output to stderr), numeric level (the higher the level, the more detailed extensive the output), 0 for no debug (this is the default setting).

Syntax

xmlsoapctx *XmlSoapCreateCtx(
   xmlctx *xctx, 
   xmlerr *xerr, 
   oratext *name, 
   ...);

Parameter	In/Out	Description
xctx	IN	XML context
xerr	OUT	error return code on failure
name	IN	name of context; used for debugging
...	IN	options, as (name, value) pairs, followed by `NULL`

Returns

(xmlsoapctx *) SOAP context, or NULL on failure (w/xerr set)

See Also:

XmlSoapDestroyCtx()

XmlSoapCreateMsg()

Creates and returns an empty SOAP message. The SOAP message will consist of an Envelope. The Envelope contains an empty Header and Body. A SOAP message is an XML document represented by a DOM, and is no different from any other XML document. All DOM operations are valid on the document, but be sure not to harm the overall structure. Changes should be restricted to creating and modifying elements inside the Header and Body.

Syntax

xmldocnode *XmlSoapCreateMsg(
   xmlsoapctx *ctx, 
   xmlerr *xerr);

Parameter	In/Out	Description
ctx	IN	SOAP context
xerr	OUT	error retrun code on failure

Returns

(xmldocnode *) SOAP message, or NULL on failure (w/xerr set)

See Also:

XmlSoapDestroyMsg()

XmlSoapDestroyConnection()

Destroys a SOAP connection object made with XmlSoapCreateConnection and frees all allocated resources.

Syntax

xmlerr XmlSoapDestroyConnection(
   xmlsoapctx *ctx, 
   xmlsoapcon *con);

Parameter	In/Out	Description
ctx	IN	SOAP context
con	IN	SOAP connection

Returns

(xmlerr) numeric error code, XMLERR_OK [0] on success

XmlSoapDestroyCtx()

Destroys a SOAP context created with XmlSoapCreateCtx. All memory allocated will be freed, and all connections closed.

Syntax

xmlerr XmlSoapDestroyCtx(
   xmlsoapctx *ctx);

Parameter	In/Out	Description
ctx	IN	SOAP context

Returns

(xmlerr) numeric error code, XMLERR_OK [0] on success

See Also:

XmlSoapCreateCtx()

XmlSoapDestroyMsg()

Destroys a SOAP message created with XmlSoapCreateMsg; this is the same as calling XmlFreeDocument.

Syntax

xmlerr XmlSoapDestroyMsg(
   xmlsoapctx *ctx,
   xmldocnode *msg);

Parameter	In/Out	Description
ctx	IN	SOAP connection
msg	IN	SOAP message

Returns

(xmlerr) numeric error code, XMLERR_OK [0] on success

See Also:

XmlSoapCreateMsg()

XmlSoapError()

Retrives human readable representation of the error code. Optionally, retrieves the information about the error code of the underlying layer.

Syntax

oratext *XmlSoapError(
   xmlsoapctx *ctx, 
   xmlsoapcon *con,
   xmlerr err,
   uword *suberr,
   oratext **submsg);

Parameter	In/Out	Description
ctx	IN	SOAP context
con	IN	Connection about which additional info is requested
err	IN	Error code for which human readable information will be returned.
suberr	OUT	Error code from `con`
submsg	OUT	Human readable information about `con` error

Returns

(oratext *) error code

XmlSoapGetBody()

Returns a SOAP message's envelope body.

Syntax

xmlelemnode *XmlSoapGetBody(
   xmlsoapctx *ctx, 
   xmldocnode *msg,
   xmlerr *xerr);

Parameter	In/Out	Description
ctx	IN	SOAP context
msg	IN	SOAP message
xmlerr	IN/OUT	error code

Returns

(xmlelemnode *) SOAP Body

See Also:

XmlSoapGetHeader()

XmlSoapGetBodyElement()

Gets an element from a SOAP body.

Syntax

xmlelemnode *XmlSoapGetBodyElement(
   xmlsoapctx *ctx, 
   xmldocnode *msg,
   oratext *uri,
    oratext *local,
    xmlerr *xerr);

Parameter	In/Out	Description
ctx	IN	SOAP context
msg	IN	SOAP message
uri	IN	Namespace URI of element to get
local	IN	Local name of element to get
xerr	IN/OUT	error code

Returns

(xmlelemnode *) named element, or NULL on error

See Also:

XmlSoapAddBodyElement()

XmlSoapGetEnvelope()

Returns a SOAP part's envelope

Syntax

xmlelemnode *XmlSoapGetEnvelope(
   mlsoapctx *ctx, 
   xmldocnode *msg, 
   xmlerr *xerr);

Parameter	In/Out	Description
ctx	IN	SOAP context
msg	IN	SOAP message
xerr	IN/OUT	error code

Returns

(xmlelemnode *) SOAP envelope

XmlSoapGetFault()

Returns Fault code, reason, and details. Fetches the Fault information and returns through user variables. NULL may be supplied for any part which is not needed. For lang, if the pointed-to variable is NULL, it will be set to the default language (that of the first reason).

Syntax

xmlerr XmlSoapGetFault(
   xmlsoapctx *ctx, 
   xmldocnode *msg, 
   oratext **code,
   oratext **reason, 
   oratext **lang,
   oratext **node,
   oratext **role,
   xmlelemnode **detail);

Parameter	In/Out	Description
ctx	IN	SOAP context
msg	IN/OUT	SOAP message
code	OUT	Code (1.2), faultcode (1.1)
reason	OUT	Human-readable fault Reason (1.2), faultreason (1.1)
lang	IN	Desired language for reason (1.2), not used ( `NULL` in 1.1)
node	OUT	Fault node
role	OUT	Role: next, none, or ulitmate receiver. Not used in 1.1
detail	OUT	User-defined details

Returns

(xmlerr) numeric error code, XMLERR_OK [0] on success

See Also:

XmlSoapSetFault()

XmlSoapGetHeader()

Returns a SOAP message's envelope header.

Syntax

xmlelemnode *XmlSoapGetHeader(
   xmlsoapctx *ctx, 
  xmldocnode *msg, 
   xmlerr *xerr);

Parameter	In/Out	Description
ctx	IN	SOAP context
msg	IN	SOAP message
xerr	IN/OUT	error code

Returns

(xmlelemnode *) SOAP header

See Also:

XmlSoapGetBody()

XmlSoapGetHeaderElement()

Gets an element from a SOAP header. Sets a numeric error code.

Syntax

xmlelemnode *XmlSoapGetHeaderElement(
   xmlsoapctx *ctx,
   xmldocnode *msg,
   oratext *uri,
   oratext *local,
   xmlerr *xerr);

Parameter	In/Out	Description
ctx	IN	SOAP context
msg	IN	SOAP message
uri	IN	Namespace URI of element to get
local	IN	Local name of element to get
xerr	IN/OUT	Error code

Returns

(xmlelemnode *) named element, or NULL on error

XmlSoapGetMustUnderstand()

Gets mustUnderstand attribute from SOAP header element. The absence of this attribute is not an error and treated as value FALSE. To indicate the absence of an attribute, the error code XMLERR_SOAP_NO_MUST_UNDERSTAND is returned in this case, XMLERR_OK (0) is returned if the attribute is present. Other appropriate error codes might be returned. User supplied mustUnderstand value is set accordingly.

Syntax

xmlerr XmlSoapGetMustUnderstand(
   xmlsoapctx *ctx, 
   xmlelemnode *elem,
   boolean *mustUnderstand);

Parameter	In/Out	Description
ctx	IN	SOAP context
elem	IN	SOAP header element
mustUnderstand	OUT	`mustUnderstand` value, TRUE\|FALSE

Returns

(xmlerr) numeric error code, XMLERR_OK [0] on success

XmlSoapGetReasonLang()

Gets the language of a reason with a particular index.

Syntax

xmlerr XmlSoapGetReasonLang(
   xmlsoapctx *ctx, 
   xmldocnode *msg,
   ub4 index, 
   oratext **lang);

Parameter	In/Out	Description
ctx	IN	SOAP context
msg	IN	SOAP message
indx	IN	Index of fault reason
lang	IN	Reason language

Returns

(xmlerr) numeric error code, XMLERR_OK [0] on success

XmlSoapGetReasonNum()

Determines the number of reasons in Fault element. Returns 0 if Fault is not present.

Syntax

ub4 XmlSoapGetReasonNum(
   xmlsoapctx *ctx, 
   xmldocnode *msg);

Parameter	In/Out	Description
ctx	IN	SOAP context
msg	IN	SOAP message

Returns

(ub4 *) #num reasons

See Also:

XmlSoapGetFault(), XmlSoapHasFault()

XmlSoapGetRelay()

Gets Relay attribute from SOAP header element.

Syntax

xmlerr XmlSoapGetRelay(
   xmlsoapctx *ctx, 
   xmlelemnode *elem,
   boolean *Relay);

Parameter	In/Out	Description
ctx	IN	SOAP context
elem	IN	SOAP header element
Relay	OUT	Relay value

Returns

xmlerr numeric error code, XMLERR_OK on success

XmlSoapGetRole()

Gets role from SOAP header element. If the element has no role, XMLERR_SOAP_NO_ROLE is returned, otherwise XMLERR_OK (0) is returned and the user's role is set accordingly. if the element has no role, then according to the standard, the user's role is set to XMLSOAP_ROLE_ULT.

Syntax

xmlerr XmlSoapGetRole(
   xmlsoapctx *ctx, 
   xmlelemnode *elem, 
   xmlsoaprole *role);

Parameter	In/Out	Description
ctx	IN	SOAP context
elem	IN	SOAP header element
role	OUT	Role value

Returns

(xmlerr) numeric error code, XMLERR_OK [0] on success

XmlSoapHasFault()

Determines if SOAP message contains Fault object.

Syntax

boolean XmlSoapHasFault(
   xmlsoapctx *ctx, 
   xmldocnode *msg, 
   xmlerr *xerr);

Parameter	In/Out	Description
ctx	IN	SOAP context
msg	IN	SOAP message
xerr	IN/OUT	Error code

Returns

(boolean) TRUE if there's a Fault, FALSE if not

See Also:

XmlSoapGetFault()

XmlSoapSetFault()

Sets Fault in SOAP message.

In version 1.2, only one Fault is allowed for each message, and it must be the only child of the Body. If the Body has children, they are first removed and freed. The Fault is then added with children code - "env:Code" (required), reason - "env:Reason" (required), node - "env:Node" (optional), role - "env:role"(optional), and detail - "env:Detail" (optional). The primary-language reason should be added first; calls to XmlSoapGetFault which pass a NULL language will pick this reason. Detail is the user-defined subtree to be spliced into the Fault.
In version 1.1, only one Fault is allowed per message. If the Body already has Fault, it is first removed and freed. The Fault is then added with children code - "faultcode" (required), reason - "faultstring" (required), node - "faultactor" (optional), and detail - "detail" (optional). Detail is the user-defined subtree to be spliced into the Fault. role and lang are not used in ver 1.1

Syntax

xmlerr XmlSoapSetFault(
   xmlsoapctx *ctx, 
   xmldocnode *msg,
   oratext *node, 
   oratext *code, 
   oratext *reason, 
   oratext *lang, 
   oratext *role, 
   xmlelemnode *detail);

Parameter	In/Out	Description
ctx	IN	SOAP context
msg	IN/OUT	SOAP message
node	IN	URI of SOAP node which faulted, Node (1.2), faultactor(1.1)
code	IN	Code (1.2), faultcode (1.1)
reason	IN	Human-readable fault Reason (1.2), faultreason (1.1)
lang	IN	Language of reason (1.2), unused (1.1)
role	IN	URI representing role, Role (1.2), unused (1.1)
detail	IN	detail elements (user-defined)

Returns

(xmlerr) numeric error code, XMLERR_OK [0] on success

See Also:

XmlSoapAddFaultReason()

XmlSoapSetMustUnderstand()

Sets mustUnderstand attribute for SOAP header element. According to the standard, if the value is FALSE, the attribute is not set.

Syntax

xmlerr XmlSoapSetMustUnderstand(
   xmlsoapctx *ctx, 
   xmlelemnode *elem,
   boolean mustUnderstand);

Parameter	In/Out	Description
ctx	IN	SOAP context
elem	IN/OUT	SOAP header element
mustUnderstand	IN	`mustUnderstand` value, TRUE\|FALSE

Returns

(xmlerr) numeric error code, XMLERR_OK [0] on success

See Also:

XmlSoapSetRole()

XmlSoapSetRelay()

Sets Relay attribute for a SOAP header element. If the value is FALSE, the attribute is not set.

Syntax

xmlerr XmlSoapSetRelay(
   xmlsoapctx *ctx,
   xmlelemnode *elem,   boolean Relay);

Parameter	In/Out	Description
ctx	IN	SOAP context
elem	IN/OUT	SOAP header element
Relay	IN	Relay; `TRUE\|FALSE`

Returns

(xmlerr) numeric error code, XMLERR_OK [0] on success

See Also:

XmlSoapGetRelay()

XmlSoapSetRole()

Sets role for SOAP header element. If the role specified is XMLSOAP_ROLE_ULT, then according to the standard the attribute is not set.

Syntax

xmlerr XmlSoapSetRole(
   xmlsoapctx *ctx, 
   xmlelemnode *elem, 
   xmlsoaprole role);

Parameter	In/Out	Description
ctx	IN	SOAP context
elem	IN/OUT	SOAP header element
role	IN	Role value

Returns

xmlerr numeric error code, XMLERR_OK on success

See Also:

XmlSoapSetMustUnderstand()