Stateme nt Class

A Statement object is used for executing SQL statements. The statement may be a query returning result set, or a non-query statement returning an update count. Non-query SQL can be insert, update, or delete statements. Non-query SQL statements can also be DML statements (such as create, grant, and so on) or stored procedure calls.

A query, insert / update / delete, or stored procedure call statements may have IN bind parameters, while a stored procedure call statement may have either OUT bind parameters or bind parameters that are both IN and OUT, referred to as IN/OUT parameters.

The Statement class methods are divided into three categories:

Statement methods applicable to all statements
Methods applicable to prepared statements with IN bind parameters
Methods applicable to callable statements with OUT or IN/OUT bind parameters.

Table 12-42 Enumerated Values used by the Statement Class

Attribute Options

Attribute	Options
Status	`NEEDS_STREAM_DATA` indicates that output `Streams` must be written for the streamed `IN` bind parameters. If there is more than one streamed parameter, call the getCurrentStreamParam() method to find out the bind parameter needing the stream. If the statement is executed iteratively, call getCurrentIteration() to find the iteration for which stream needs to be written. `PREPARED` indicates that the `Statement` is set to a query. `RESULT_SET_AVAILABLE` indicates that the getResultSet() method must be called to get the result set. `STREAM_DATA_AVAILABLE` indicates that the input `Streams` must be read for the streamed `OUT` bind parameters. If there is more than one streamed parameter, call the getCurrentStreamParam() method to find out the bind parameter needing the stream. If the statement is executed iteratively, call getCurrentIteration() to find the iteration for which stream needs to be read. `UPREPARED` indicates that the `Statement` object is not set to a query. `UPDATE_COUNT_AVAILABLE` indicates that the getUpdateCount() method must be called to find out the update count.

Status

NEEDS_STREAM_DATA indicates that output Streams must be written for the streamed IN bind parameters. If there is more than one streamed parameter, call the getCurrentStreamParam() method to find out the bind parameter needing the stream. If the statement is executed iteratively, call getCurrentIteration() to find the iteration for which stream needs to be written.
PREPARED indicates that the Statement is set to a query.
RESULT_SET_AVAILABLE indicates that the getResultSet() method must be called to get the result set.
STREAM_DATA_AVAILABLE indicates that the input Streams must be read for the streamed OUT bind parameters. If there is more than one streamed parameter, call the getCurrentStreamParam() method to find out the bind parameter needing the stream. If the statement is executed iteratively, call getCurrentIteration() to find the iteration for which stream needs to be read.
UPREPARED indicates that the Statement object is not set to a query.
UPDATE_COUNT_AVAILABLE indicates that the getUpdateCount() method must be called to find out the update count.

Table 12-43 Statement Methods

Method	Description
addIteration()	Adds an iteration for execution.
closeResultSet()	Immediately releases a result set's database and OCCI resources instead of waiting for automatic release.
closeStream()	Closes the stream specified by the parameter `stream`.
disableCaching()	Disables statement caching.
execute()	Runs the SQL statement.
executeArrayUpdate()	Runs insert, update, and delete statements that use only the `setDataBuffer()` or stream interface for bind parameters.
executeQuery()	Runs a SQL statement that returns a single `ResultSet`.
executeUpdate()	Runs a SQL statement that does not return a `ResultSet`.
getAutoCommit()	Returns the current auto-commit state.
getBatchErrorMode()	Returns the state of the batch error mode.
getBDouble()	Returns the value of an IEEE754 `DOUBLE` as a `BDouble` object.
getBfile()	Returns the value of a `BFILE` as a `Bfile` object.
getBFloat()	Returns the value of a `IEEE754 FLOAT` as a `BFloat` object.
getBlob()	Returns the value of a `BLOB` as a `Blob` object.
getBytes()	Returns the value of a `SQL BINARY` or `VARBINARY` parameter as `Bytes`.
getCharSet()	Returns the characterset that is in effect for the specified parameter, as a `string`.
getCharSetUString()	Returns the characterset that is in effect for the specified parameter, as a `UString`.
getClob()	Returns the value of a `CLOB` as a `Clob` object.
getConnection()	Returns the connection from which the `Statement` object was instantiated.
getCurrentIteration()	Returns the iteration number of the current iteration that is being processed.
getCurrentStreamIteration()	Returns the current iteration for which stream data is to be read or written.
getCurrentStreamParam()	Returns the parameter index of the current output Stream that must be read or written.
getCursor()	Returns the `REF CURSOR` value of an OUT parameter as a `ResultSet`.
getDatabaseNCHARParam()	Returns whether data is in NCHAR character set.
getDate()	Returns the value of a parameter as a `Date` object
getBDouble()	Returns the value of a parameter as an IEEE754 double.
getDouble()	Returns the value of a parameter as a C++ double.
getBFloat()	Returns the value of a parameter as an IEEE754 float.
getFloat()	Returns the value of a parameter as a C++ float.
getInt()	Returns the value of a parameter as a C++ int.
getIntervalDS()	Returns the value of a parameter as a `IntervalDS` object.
getIntervalYM()	Returns the value of a parameter as a `IntervalYM` object.
getMaxIterations()	Returns the current limit on maximum number of iterations.
getMaxParamSize()	Returns the current max parameter size limit.
getNumber()	Returns the value of a parameter as a `Number` object.
getObject()	Returns the value of a parameter as a `PObject`.
getOCIStatement()	Returns the OCI statement handle associated with the `Statement`.
getRef()	Returns the value of a REF parameter as `RefAny`
getResultSet()	Returns the current result as a `ResultSet`.
getRowid()	Returns the row id parameter value as a `Bytes` object.
getSQL()	Returns the current SQL string associated with the `Statement` object.
getSQLUString()	Returns the current SQL string associated with the `Statement` object; globalization enabled.
getStream()	Returns the value of the parameter as a stream.
getString()	Returns the value of the parameter as a string.
getTimestamp()	Returns the value of the parameter as a `Timestamp` object
getUInt()	Returns the value of the parameter as a C++ unsigned int
getUpdateCount()	Returns the current result as an update count for non-query statements.
getUString()	Returns the value of a `UString`.
getVector()	Returns the specified parameter as a vector.
getVectorOfRefs()	Returns the column in the current position as a vector of `REF`s.
isNull()	Checks whether the parameter is `NULL`.
isTruncated()	Checks whether the value is truncated.
preTruncationLength()	Returns the actual length of the parameter before truncation.
registerOutParam()	Registers the type and max size of the OUT parameter.
setAutoCommit()	Specifies auto commit mode.
setBatchErrorMode()	Enables or disables the batch error processing mode.
setBDouble()	Sets a parameter to an IEEE double value.
setBfile()	Sets a parameter to a `Bfile` value.
setBFloat()	Sets a parameter to an IEEE float value.
setBinaryStreamMode()	Specifies that a column is to be returned as a binary stream.
setBlob()	Sets a parameter to a `Blob` value.
setBytes()	Sets a parameter to a `Bytes` array.
setCharacterStreamMode()	Specifies that a column is to be returned as a character stream.
setCharSet()	Specifies the characterset as a `string`.
setCharSetUString()	Specifies the characte set as a `UString`.
setClob()	Sets a parameter to a `Clob` value.
setDate()	Sets a parameter to a `Date` value.
setDatabaseNCHARParam()	Sets to true if the data is to be in the NCHAR character set of the database; set to false to restore the default.
setDataBuffer()	Specifies a data buffer where data would be available for reading or writing.
setDataBufferArray()	Specifies an array of data buffers where data would be available for reading or writing.
setDouble()	Sets a parameter to a C++ double value.
setErrorOnNull()	Enables Or Disables exceptions for reading of `NULL` values.
setErrorOnTruncate()	Enables Or Disables exception when truncation occurs.
setFloat()	Sets a parameter to a C++ float value.
setInt()	Sets a parameter to a C++ int value.
setIntervalDS()	Sets a parameter to a `IntervalDS` value.
setIntervalYM()	Sets a parameter to a `IntervalYM` value.
setMaxIterations()	Sets the maximum number of invocations that will be made for the DML statement.
setMaxParamSize()	Sets the maximum amount of data that can sent or returned from the parameter.
setNull()	Sets a parameter to SQL `NULL`.
setNumber()	Sets a parameter to a `Number` value.
setObject()	Sets the value of a parameter using an object.
setPrefetchMemorySize()	Sets the amount of memory that will be used internally by OCCI to store data fetched during each round trip to the server.
setPrefetchRowCount()	Sets the number of rows that will be fetched internally by OCCI during each round trip to the server.
setRef()	Sets the value of a parameter to a reference.
setRowid()	Sets a row id bytes array for a bind position.
setSQL()	Associates new SQL string with `Statement` object.
setSQLUString()	Associates new SQL string with `Statement` object; globalization enabled.
setString()	Sets a parameter for a specified index.
setTimestamp()	Sets a parameter to a `Timestamp` value.
setUInt()	Sets a parameter to a C++ unsigned int value.
setUString()	Sets a parameter for a specified index; globalization enabled.
setVector()	Sets a parameter to a vector of unsigned int.
setVectorOfRefs()	Sets a parameter to a vector; should be used when the type is a collection of `REF`s.
status()	Returns the current status of the statement. This is useful when there is streamed data to be written.

addIteration()

After specifying set parameters, an iteration is added for execution.

Syntax

void addIteration();

closeResultSet()

In many cases, it is desirable to immediately release a result set's database and OCCI resources instead of waiting for this to happen when it is automatically closed; the closeResultSet() method provides this immediate release.

Syntax

void closeResultSet(
   ResultSet *resultSet);

Parameter	Description
resultSet	The resultset to be closed. The resultset should have been obtained by a call to the getResultSet() method on this statement.

closeStream()

Closes the stream specified by the parameter stream.

Syntax

void closeStream(
   Stream *stream);

Parameter	Description
stream	The stream to ne closed.

disableCaching()

Disables statement caching. Used if a user wishes to destroy a statement instead of caching it. Effective only if statement caching is enabled.

Syntax

void disableCaching();

execute()

Executes an SQL statement that may return either a result set or an update count. The statement may have read-able streams which may have to be written, in which case the results of the execution may not be readily available. The returned value Status is defined in Table 12-42.

If output streams are used for OUT bind variables, they must be completely read in order. The getCurrentStreamParam() method would indicate which stream needs to be read. Similarly, getCurrentIteration() would indicate the iteration for which data is available.

Syntax	Description
Status execute( const string &sql="");	Executes the SQL Statement.
Status execute( const UString &sql);	Executes the SQL Statement; globalization enabled.

Parameter	Description
sql	The SQL statement to be executed. This can be `NULL` if the executeArrayUpdate() method was used to associate the sql with the statement.

executeArrayUpdate()

Executes insert/update/delete statements which use only the setDataBuffer() or stream interface for bind parameters. The bind parameters must be arrays of size arrayLength parameter. The statement may have writeable streams which may have to be written. The returned value Status is defined in Table 12-42.

Note:

You cannot perform array executes for queries or callable statements.

Syntax

Status executeArrayUpdate(
   unsigned int arrayLength);

Parameter	Description
arrayLength	The number of elements provided in each buffer of bind variables.

executeQuery()

Runs a SQL statement that returns a ResultSet. Should not be called for a statement which is not a query, has streamed parameters. Returns a ResultSet that contains the data produced by the query.

Syntax	Description
ResultSet* executeQuery( const string &sql="");	Executes the SQL Statement that returns a `ResultSet`.
ResultSet* executeQuery( const UString &sql);	Executes the SQL Statement that returns a `ResultSet;` globalization enabled.

Parameter	Description
sql	The SQL statement to be executed. This can be `NULL` if the executeArrayUpdate() method was used to associate the sql with the statement.

executeUpdate()

Executes a non-query statement such as a SQL INSERT, UPDATE, DELETE statement, a DDL statement such as CREATE/ALTER and so on, or a stored procedure call. Returns either the row count for INSERT, UPDATE or DELETE or 0 for SQL statements that return nothing.

Syntax	Description
unsigned int executeUpdate( const string &sql="");	Executes a non-query statement.
unsigned int executeUpdate( const UString &sql);	Executes a non-query statement; globalization enabled.

Parameter	Description
sql	The SQL statement to be executed. This can be `NULL` if the executeArrayUpdate() method was used to associate the sql with the statement.

getAutoCommit()

Returns the current auto-commit state.

Syntax

bool getAutoCommit() const;

getBatchErrorMode()

Returns the state of the batch error mode; TRUE if the batch error mode is enabled, FALSE otherwise.

Syntax

bool getBatchErrorMode() const;

getBDouble()

Returns the value of an IEEE754 DOUBLE column, which has been defined as an OUT bind. If the value is SQL NULL, the result is 0.

Syntax

BDouble getBDouble(
   unsigned int paramIndex) = 0;

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.

getBfile()

Returns the value of a BFILE parameter as a Bfile object.

Syntax

Bfile getBfile(
   unsigned int paramIndex);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.

getBFloat()

Gets the value of an IEEE754 FLOAT column, which has been defined as an OUT bind. If the value is SQL NULL, the result is 0.

Syntax

BFloat getBFloat(
   unsigned int paramIndex) = 0;

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.

getBlob()

Returns the value of a BLOB parameter as a Blob.

Syntax

Blob getBlob(
   unsigned int paramIndex);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.

getBytes()

Returns the value of n SQL BINARY or VARBINARY parameter as Bytes; if the value is SQL NULL, the result is NULL.

Syntax

Bytes getBytes(
   unsigned int paramIndex);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.

getCharSet()

Returns the characterset that is in effect for the specified parameter, as a string.

Syntax

string getCharSet(
   unsigned int paramIndex) const;

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.

getCharSetUString()

Returns the characte set that is in effect for the specified parameter, as a UString.

Syntax

UString getCharSetUString(
   unsigned int paramIndex) const;

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.

getClob()

Get the value of a CLOB parameter as a Clob. Returns the parameter value.

Syntax

Clob getClob(
   unsigned int paramIndex);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.

getConnection()

Returns the connection from which the Statement object was instantiated.

Syntax

Connection* getConnection() const;

getCurrentIteration()

If the prepared statement has any output Streams, this method returns the current iteration of the statement that is being processed by OCCI. If this method is called after all the invocations in the set of iterations has been processed, it returns 0. Returns the iteration number of the current iteration that is being processed. The first iteration is numbered 1 and so on. If the statement has finished execution, a 0 is returned.

Syntax

unsigned int getCurrentIteration() const;

getCurrentStreamIteration()

Returns the current parameter stream for which data is available.

Syntax

unsigned int getCurrentStreamIteration() const;

getCurrentStreamParam()

Returns the parameter index of the current output Stream parameter that must be written. If the prepared statement has any output Stream parameters, this method returns the parameter index of the current output Stream that must be written. If no output Stream needs to be written, or there are no output Stream parameters in the prepared statement, this method returns 0.

Syntax

unsigned int getCurrentStreamParam() const;

getCursor()

Gets the REF CURSOR value of an OUT parameter as a ResultSet. Data can be fetched from this result set. The OUT parameter must be registered as CURSOR with the registerOutParam() method. Returns a ResultSet for the OUT parameter value.

Note:

If there are multiple REF CURSORs being returned due to a batched call, data from each cursor must be completely fetched before retrieving the next REF CURSOR and starting fetch on it.

Syntax

ResultSet * getCursor(
   unsigned int paramIndex);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.

getDatabaseNCHARParam()

Returns whether data is in NCHAR character set or not.

Syntax

bool getDatabaseNCHARParam(
   unsigned int paramIndex) const;

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.

getDate()

Get the value of a SQL DATE parameter as a Date object. Returns the parameter value; if the value is SQL NULL, the result is NULL.

Syntax

Date getDate(
   unsigned int paramIndex) const;

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.

getDouble()

Get the value of a DOUBLE parameter as a C++ double. Returns the parameter value; if the value is SQL NULL, the result is 0.

Syntax

double getDouble(
   unsigned int paramIndex);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.

getFloat()

Get the value of a FLOAT parameter as a C++ float. Returns the parameter value; if the value is SQL NULL, the result is 0.

Syntax

float getFloat(
   unsigned int paramIndex);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.

getInt()

Get the value of an INTEGER parameter as a C++ int. Returns the parameter value; if the value is SQL NULL, the result is 0.

Syntax

unsigned int getInt(
   unsigned int paramIndex);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.

getIntervalDS()

Get the value of a parameter as a IntervalDS object.

Syntax

IntervalDS getIntervalDS(
   unsigned int paramIndex);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.

getIntervalYM()

Get the value of a parameter as a IntervalYM object.

Syntax

IntervalYM getIntervalYM(
   unsigned int paramIndex);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.

getMaxIterations()

Gets the current limit on maximum number of iterations. Default is 1. Returns the current maximum number of iterations.

Syntax

unsigned int getMaxIterations() const;

getMaxParamSize()

The maxParamSize limit (in bytes) is the maximum amount of data sent or returned for any parameter value; it only applies to character and binary types. If the limit is exceeded, the excess data is silently discarded. Returns the current max parameter size limit.

Syntax

unsigned int getMaxParamSize(
   unsigned int paramIndex) const;

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.

getNumber()

Gets the value of a NUMERIC parameter as a Number object. Returns the parameter value; if the value is SQL NULL, the result is NULL.

Syntax

Number getNumber(
   unsigned int paramIndex);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.

getObject()

Gets the value of a parameter as a PObject. This method returns an PObject whose type corresponds to the SQL type that was registered for this parameter using registerOutParam(). Returns A PObject holding the OUT parameter value.

Note:

This method may be used to read database-specific, abstract data types.

Syntax

PObject * getObject(
   unsigned int paramIndex);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.

getOCIStatement()

Get the OCI statement handle associated with the Statement.

Syntax

OCIStmt * getOCIStatement() const;

getRef()

Get the value of a REF parameter as RefAny. Returns the parameter value.

Syntax

RefAny getRef(
   unsigned int paramIndex);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.

getResultSet()

Returns the current result as a ResultSet.

Syntax

ResultSet * getResultSet();

getRowid()

Get the rowid parameter value as a Bytes.

Syntax

Bytes getRowid(
   unsigned int paramIndex);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.

getSQL()

Returns the current SQL string associated with the Statement object.

Syntax

string getSQL() const;

getSQLUString()

Returns the current SQL UString associated with the Statement object; globalization enabled.

Syntax

UString getSQLUString() const;

getStream()

Returns the value of the parameter as a stream.

Syntax

Stream * getStream(
   unsigned int paramIndex);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.

getString()

Get the value of a CHAR, VARCHAR, or LONGVARCHAR parameter as an string. Returns the parameter value; if the value is SQL NULL, the result is empty string.

Syntax

string getString(
   unsigned int paramIndex);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.

getTimestamp()

Get the value of a SQL TIMESTAMP parameter as a Timestamp object. Returns the parameter value; if the value is SQL NULL, the result is NULL

Syntax

Timestamp getTimestamp(
   unsigned int paramIndex);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.

getUInt()

Get the value of a BIGINT parameter as a C++ unsigned int. Returns the parameter value; if the value is SQL NULL, the result is 0.

Syntax

unsigned int getUInt(
   unsigned int paramIndex);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.

getUpdateCount()

Returns the current result as an update count.

Syntax

unsigned int getUpdateCount() const;

getUString()

Returns the value as a UString.

Note:

This method should be called only if the environment's character set is UTF16, or if setCharset() method has been called to explicitly retrieve UTF16 data.

Syntax

UString getUString(
   unsigned int paramIndex);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.

getVector()

Returns the column in the current position as a vector. The column at the position, specified by index, should be a collection type (varray or nested table). The SQL type of the elements in the collection should be compatible with the type of the vector.

Syntax	Description
void getVector( Statement *stmt, unsigned int paramIndex, std::vector<UString> &vect);	Used for vectors of `UString Class`; globalization enabled.
void getVector( Statement *stmt, unsigned int paramIndex, vector<BDouble> &vect);	Used for `BDouble` vectors.
void getVector( Statement *stmt, unsigned int paramIndex, vector<BFile> &vect);	Used for vectors of BfileClass.
void getVector( Statement *stmt, unsigned int paramIndex, vector<BFloat> &vect);	Used for `BFloat` vectors.
void getVector( Statement *stmt, unsigned int paramIndex, vector<Blob> &vect);	Used for vectors of Blob Class.
void getVector( Statement *stmt, unsigned int paramIndex, vector<Clob> &vect);	Used for `Clob` vectors.
void getVector( Statement *stmt, unsigned int paramIndex, vector<Date> &vect);	Used for vectors of Date Class.
void getVector( Statement *stmt, unsigned int paramIndex, vector<double> &vect);	Used for vectors of `double Class.`
void getVector( Statement *stmt, unsigned int paramIndex, vector<float> &vect);	Used for vectors of `float Class.`
void getVector( Statement *stmt, unsigned int paramIndex, vector<int> &vect);	Used for vectors of `int Class.`
void getVector( Statement *stmt, unsigned int paramIndex, vector<IntervalDS> &vect);	Used for vectors of IntervalDSClass.
void getVector( Statement *stmt, unsigned int paramIndex, vector<IntervalYM> &vect);	Used for vectors of IntervalYMClass.
void getVector( Statement *stmt, unsigned int paramIndex, vector<Number> &vect);	Used for vectors of Number Class.
void getVector( Statement *stmt, unsigned int paramIndex, vector<RefAny> &vect);	Used for vectors of RefAnyClass.
void getVector( Statement *stmt, unsigned int paramIndex, vector<string> &vect);	Used for vectors of `string Class.`
void getVector( Statement stmt, unsigned int paramIndex, vector<T > &vect);	Intended for use on platforms where partial ordering of function templates is supported.
void getVector( Statement *stmt, unsigned int paramIndex, vector<T> &vect);	Intended for use on platforms where partial ordering of function templates is not supported, such as Windows NT. For `OUT` binds.
void getVector( Statement *stmt, unsigned int paramIndex, vector<Timestamp> &vect);	Used for vectors of Timestamp Class.
void getVector( Statement *stmt, unsigned int paramIndex, vector<u <Ref<T> > &vect);	Available only on platforms where partial ordering of function templates is supported.
void getVector( Statement *stmt, unsigned int paramIndex, vector<unsigned int> &vect);	Used for on vectors of `unsigned int Class.`

Parameter	Description
stmt	The statement.
paramIndex	Parameter index.
vect	Reference to the vector (`OUT` parameter) into which the values should be retrieved.

getVectorOfRefs()

This method returns the column in the current position as a vector of REFs. The column should be a collection type (varray or nested table) of REFs. Used with OUT binds.

Syntax

void getVectorOfRefs(
   Statement *stmt,
   unsigned int colIndex,
   vector< Ref<T> > &vect);

Parameter	Description
stmt	The statement object.
colIndex	Column index; first column is 1, second is 2, and so on.
vect	The reference to the vector of `REF`s (`OUT` parameter). It is recommended to use `getVectorOfRefs()` instead of specialized `getVector()` function for `Ref<T>.`

isNull()

An OUT parameter may have the value of SQL NULL; wasNull() reports whether the last value read has this special value. Note that you must first call getxxx() on a parameter to read its value and then call wasNull() to see if the value was SQL NULL. Returns TRUE if the last parameter read was SQL NULL.

Syntax

bool isNull(
   unsigned int paramIndex ) const;

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.

isTruncated()

This method checks whether the value of the parameter is truncated. If the value of the parameter is truncated, then TRUE is returned; otherwise, FALSE is returned.

Syntax

bool isTruncated(
   unsigned int paramIndex) const;

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.

preTruncationLength()

Returns the actual length of the parameter before truncation.

Syntax

int preTruncationLength(
   unsigned int paramIndex) const;

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.

registerOutParam()

This method registers the type of each out parameter of a PL/SQL stored procedure. Before executing a PL/SQL stored procedure, you must explicitly call this method to register the type of each out parameter. This method should be called for out parameters only. Use the setxxx() method for in/out parameters.

When reading the value of an out parameter, you must use the getxxx() method that corresponds to the parameter's registered SQL type. For example, use getInt or getNumber when OCCIINT or OCCINumber is the type specified.
If a PL/SQL stored procedure has an out parameter of type ROWID, the type specified in this method should be OCCISTRING. The value of the out parameter can then be retrieved by calling the getString() method.
If a PL/SQL stored procedure has an in/out parameter of type ROWID, call the methods setString() and getString() to set the type and retrieve the value of the IN/OUT parameter.

Syntax Description

void registerOutParam(
   unsigned int paramIndex,
   Type type,
   unsigned int maxSize=0,
   const string &sqltype="");

Registers the type of each out parameter of a PL/SQL stored procedure.

void registerOutParam(
   unsigned int paramIndex,
   Type type,
   unsigned int maxSize,
   const string typName,
   const string &schName);

Registers the type of each out parameter of a PL/SQL stored procedure; string support.

void registerOutParam(
   unsigned int paramIndex,
   Type type,
   unsigned int maxSize,
   const UString &typName,
   const UString &schName);

Registers the type of each out parameter of a PL/SQL stored procedure; globalization enabled, or UString support.

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
type	SQL type code defined by `type`; only datatypes corresponding to OCCI data types such as `Date`, `Bytes`, and so on.
maxSize	The maximum size of the retrieved value. For datatypes of `OCCIBYTES` and `OCCISTRING`, `maxSize` should be greater than `0`.
sqltype	The name of the type in the data base (used for types which have been created with `CREATE TYPE`).
typName	The name of the type.
schName	The schema name.

setAutoCommit()

A Statement can be in auto-commit mode. In this case any statement executed is also automatically committed. By default, the auto-commit mode is turned-off.

Syntax

void setAutoCommit(
   bool autoCommit);

Parameter	Description
autoCommit	`TRUE` enables auto-commit; `FALSE` disables auto-commit.

setBatchErrorMode()

Enables or disables the batch error processing mode.

Syntax

virtual void setBatchErrorMode(
   bool batchErrorMode);

Parameter	Description
batchErrorMode	`TRUE` enables batch error processing; `FALSE` disables batch error processing.

setBDouble()

Sets an IEEE754 double as a bind value to a Statement object at the position specified by paramIndex attribute.

Syntax

void setBDouble(
   unsigned int paramIndex,
   const BDouble &dval);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
dval	The parameter value.

setBfile()

Sets a parameter to a Bfile value.

Syntax

void setBfile(
   unsigned int paramIndex,
   const Bfile &val);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
val	The parameter value.

setBFloat()

Sets an IEEE754 float as a bind value to a Statement object at the position specified by the paramIndex attribute.

Syntax

void setBFloat(
   unsigned int paramIndex,
   const BFloat &fval);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
fval	The parameter value.

setBinaryStreamMode()

Defines that a column is to be returned as a binary stream.

Syntax	Description
void setBinaryStreamMode( unsigned int colIndex, unsigned int size);	Sets column returned to be a binary stream.
void setBinaryStreamMode( unsigned int colIndex, unsigned int size bool inArg);	Sets column returned to be a binary stream; used when have PL/SQL `IN` or `IN/OUT` arguments in the bind position.

Parameter	Description
colIndex	Column index; first column is 1, second is 2, and so on.
size	The amount of data to be read or returned as a binary `Stream`.
inArg	Pass `TRUE` if the bind position is a PL/SQL `IN` or `IN/OUT` argument

setBlob()

Sets a parameter to a Blob value.

Syntax

void setBlob(
   unsigned int paramIndex,
   const Blob &val);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
val	The parameter value.

setBytes()

Sets a parameter to a Bytes array.

Syntax

void setBytes(
   unsigned int paramIndex,
   const Bytes &val);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
val	The parameter value.

setCharacterStreamMode()

Defines that a column is to be returned as a character stream.

Syntax	Description
void setCharacterStreamMode( unsigned int colIndex, unsigned int size);	Sets column returned to be a character stream.
void setCharacterStreamMode( unsigned int colIndex, unsigned int size, bool inArg);	Sets column returned to be a character stream; used when have PL/SQL `IN` or `IN/OUT` arguments in the bind position.

Parameter	Description
colIndex	Column index; first column is 1, second is 2, and so on.
size	The amount of data to be read or returned as a character `Stream`.
inArg	Pass `TRUE` if the bind position is a PL/SQL `IN` or `IN/OUT` argument

setCharSet()

Overrides the default character set for the specified parameter. Data is assumed to be in the specified character set and is converted to database character set. For OUT binds, this specifies the character set to which database characters are converted to.

Syntax

void setCharSet(
   unsigned int paramIndex,
   string &charSet);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
charSet	Selected character set, as a string.

setCharSetUString()

Syntax

void setCharSetUString(
   unsigned int paramIndex,
   const UString& charSet);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
charSet	Selected character set, as a `UString`.

setClob()

Sets a parameter to a Clob value.

Syntax

void setClob(
   unsigned int paramIndex,
   const Clob &val);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
val	The parameter value.

setDate()

Sets a parameter to a Date value.

Syntax

void setDate(
   unsigned int paramIndex,
   const Date &val);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
val	The parameter value.

setDatabaseNCHARParam()

If the parameter is going to be inserted in a column that contains data in the database's NCHAR character set, then OCCI must be informed by passing a TRUE value. A FALSE can be passed to restore the dafault.Returns returns the character set that is in effect for the specified parameter.

Syntax

void setDatabaseNCHARParam(
   unsigned int paramIndex,
   bool isNCHAR);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
isNCHAR	`TRUE` if this parameter contains data in Database's `NCHAR` character set; `FALSE` otherwise

setDataBuffer()

Specifies a data buffer where data would be available. Also used for OUT bind parameters of callable statements.

The buffer parameter is a pointer to a user allocated data buffer. The current length of data must be specified in the length parameter. The amount of data should not exceed the size parameter. Finally, type is the data type of the data.

Note that not all types can be supplied in the buffer. For example, all OCCI allocated types (such as Bytes, Date and so on) cannot be provided by the setDataBuffer() interface. Similarly, C++ Standard Library strings cannot be provided with the setDataBuffer()interface either. The type can be any of OCI data types such VARCHAR2, CSTRING, CHARZ and so on.

If setDataBuffer() is used to specify data for iterative or array executes, it should be called only once in the first iteration only. For subsequent iterations, OCCI would assume that data is at buffer +(i*size) location where i is the iteration number. Similarly the length of the data would be assumed to be at (length+i).

Syntax

void setDataBuffer(
   unsigned int paramIndex,
   void *buffer,
   Type type,
   sb4 size,
   ub2 *length,
   sb2 *ind = NULL,
   ub2 *rc= NULL);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
buffer	Pointer to user-allocated buffer; if iterative or array executes are done, it should have `numIterations()` size bytes in it.
type	Type of the data that is provided (or retrieved) in the buffer.
size	Size of the data buffer; for iterative and array executes, it is the size of each element of the data items.
length	Pointer to the length of data in the buffer; for iterative and array executes, it should be an array of length data for each buffer element; the size of the array should be equal to `arrayLength()`.
ind	Indicator. For iterative and array executes, an indicator for every buffer element.
rc	Returns code; for iterative and array executes, a return code for every buffer element.

setDataBufferArray()

Specifies an array of data buffers where data would be available for reading or writing. Used for IN, OUT, and IN/OUT bind parameters for stored procedures which read/write array parameters.

A stored procedure can have an array of values for IN, IN/OUT, or OUT parameters. In this case, the parameter must be specified using the setDataBufferArray() method. The array is specified just as for the setDataBuffer() method for iterative or array executes, but the number of elements in the array is determined by *arrayLength parameter.
For OUT and IN/OUT parameters, the maximum number of elements in the array is specified by the arraySize parameter. Note that for iterative prepared statements, the number of elements in the array is determined by the number of iterations, and for array executes the number of elements in the array is determined by the arrayLength parameter of the executeArrayUpdate() method. However, for array parameters of stored procedures, the number of elements in the array must be specified in the arrayLength parameter of the setDataBufferArray() method because each parameter may have a different size array.
This is different from prepared statements where for iterative and array executes, the number of elements in the array for each parameter is the same and is determined by the number of iterations of the statement, but a callable statement is executed only once, and each of its parameter can be a varying length array with possibly a different length.

Note:

For OUT and IN/OUT binds, the number of elements returned in the array is returned in arrayLength as well. The client must make sure that it has allocated size *arraySize bytes for the buffer.

Syntax

void setDataBufferArray(
   unsigned int paramIndex,
   void *buffer,
   Type type,
   ub4 arraySize,
   ub4 *arrayLength,
   sb4 elementSize,
   ub2 *elementLength,
   sb2 *ind = NULL,
   ub2 *rc = NULL);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
buffer	Pointer to user-allocated buffer. It should have `size* arraySize` bytes in it.
type	Type of the data that is provided (or retrieved) in the buffer.
arraySize	Maximum number of elements in the array.
arrayLength	Pointer to number of current elements in the array.
elementSize	Size of the data buffer for each element.
elementLemgth	Pointer to an array of lengths. `elementLength[i]` has the current length of the `i`th element of the array.
ind	Pointer to an array of indicators. An indicator for every buffer element.
rcs	Pointer to an array of return codes.

setDouble()

Sets a parameter to a C++ double value.

Syntax

void setDouble(
   unsigned int paramIndex,
   double val);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
val	The parameter value.

setErrorOnNull()

Enables/disables exceptions for reading of NULL values on paramIndex parameter of the statement. If exceptions are enabled, calling a getxxx() on paramIndex parameter would result in an SQLException if the parameter value is NULL. This call can also be used to disable exceptions.

Syntax

void setErrorOnNull(
   unsigned int paramIndex,
   bool causeException);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
causeException	Enable exceptions if `TRUE`. Disable if `FALSE`.

setErrorOnTruncate()

This method enables/disables exceptions when truncation occurs.

Syntax

void setErrorOnTruncate(
   unsigned int paramIndex,
   bool causeException);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
causeException	Enable exceptions if `TRUE`. Disable if `FALSE`.

setFloat()

Sets a parameter to a C++ float value.

Syntax

void setFloat(
   unsigned int paramIndex,
   float val);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
val	The parameter value.

setInt()

Sets a parameter to a C++ int value.

Syntax

void setInt(
   unsigned int paramIndex,
   int val);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
val	The parameter value.

setIntervalDS()

Sets a parameter to a IntervalDS value.

Syntax

void setIntervalDS(
   unsigned int paramIndex,
   const IntervalDS &val);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
val	The parameter value.

setIntervalYM()

Sets a parameter to a Interval value.

Syntax

void setIntervalYM(
   unsigned int paramIndex,
   const IntervalYM &val);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
val	The parameter value.

setMaxIterations()

Sets the maximum number of invocations that will be made for the DML statement. This must be called before any parameters are set on the prepared statement. The larger the iterations, the larger the numbers of parameters sent to the server in one round trip. However, a large number causes more memory to be reserved for all the parameters. Note that this is just the maximum limit. Actual number of iterations depends on the number of calls to addIteration().

Syntax

void setMaxIterations(
   unsigned int maxIterations);

Parameter	Description
maxIterations	Maximum number of iterations allowed on this statement.

setMaxParamSize()

This method sets the maximum amount of data to be sent or received for the specified parameter. It only applies to character and binary data. If the maximum amount is exceeded, the excess data is discarded. This method can be very useful when working with a LONG column. It can be used to truncate the LONG column by reading or writing it into a string or Bytes data type.

If the getSQL() or setBytes() method has been called to bind a value to an IN/OUT parameter of a PL/SQL procedure, and the size of the OUT value is expected to be greater than the size of the IN value, then setMaxParamSize() should be called.

Syntax

void setMaxParamSize(
   unsigned int paramIndex,
   unsigned int maxSize);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
maxSize	The new maximum parameter size limit; must be >0.

setNull()

Sets a parameter to SQL NULL. Note that you must specify the parameter's SQL type.

Syntax	Description
void setNull( unsigned int paramIndex, Type type);	Sets the value of a parameter to `NULL` using an object.
void setNull( unsigned int paramIndex, Type type, const string &typeName, const string &schemaName = "")	Sets the value of a parameter to `NULL` for object and collection types, `OCCIPOBJECT` and `OCCIVECTOR`. Uses the appropriate schema and type name of the object or collection type. Support for `string`.
void setNull( unsigned int paramIndex, Type type, UString &typeName, UString &schemaName);	Sets the value of a parameter to `NULL` for object and collection types, `OCCIPOBJECT` and `OCCIVECTOR`. Uses the appropriate schema and type name of the object or collection type. Support for `UString`.

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
type	SQL type.
typeName	Type name of the object or collection.
schemaName	Name of the schema where the object or collection is defined..

setNumber()

Sets a parameter to a Number value.

Syntax

void setNumber(
   unsigned int paramIndex,
   const Number &val);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
val	The parameter value.

setObject()

Sets the value of a parameter using an object; use the C++.lang equivalent objects for integral values. The OCCI specification specifies a standard mapping from C++ Object types to SQL types. The given parameter C++ object will be converted to the corresponding SQL type before being sent to the database.

Syntax

void setObject(
   unsigned int paramIndex,
   PObject* val);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
val	The object containing the input parameter value.
sqltyp	The SQL type name of the object to be set.

setPrefetchMemorySize()

Sets the amount of memory that will be used internally by OCCI to store data fetched during each round trip to the server. A value of 0 means that the amount of data fetched during the round trip is constrained by the FetchRowCount parameter. If both parameters are nonzero, the smaller of the two is used.

Syntax

void setPrefetchMemorySize(
   unsigned int bytes);

Parameter	Description
bytes	Number of bytes used for storing data fetched during each server round trip.

setPrefetchRowCount()

Sets the number of rows that will be fetched internally by OCCI during each round trip to the server. A value of 0 means that the amount of data fetched during the round trip is constrained by the FetchMemorySize parameter. If both parameters are nonzero, the smaller of the two is used. If both of these parameters are zero, row count internally defaults to 1 row and that is the value returned from the getFetchRowCount() method.

Syntax

void setPrefetchRowCount(
   unsigned int rowCount);

Parameter	Description
rowCount	Number of rows to fetch for each round trip to the server.

setRef()

Sets the value of a parameter to a reference. A Ref<T> instance will be implicitly converted to a RefAny object during this call.

Syntax	Description
void setRef( unsigned int paramIndex, const RefAny &refAny);	Sets the value of a parameter to a reference.
void setRef( unsigned int paramIndex, const RefAny &refAny, const string &typName, const string &schName = "");	Sets the value of a parameter to a reference. If the `Statement` represents a callable PL/SQL method, pass the schema name and type name of the object represented by the `Ref`. Support for `string`.
void setRef( unsigned int paramIndex, const RefAny &refAny, const UString &typName, const UString &schName);	Sets the value of a parameter to a reference. If the `Statement` represents a callable PL/SQL method, pass the schema name and type name of the object represented by the `Ref`. Support for `UString`.

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
refAny	The reference.
typName	The type of the object [optional].
schName	The schema where the object type is defined [optional].

setRowid()

Sets a Rowid bytes array for a bind position.

Syntax

void setRowid(
   unsigned int paramIndex,
   const Bytes &val);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
val	The parameter value.

setSQL()

A new SQL string can be associated with a Statement object by this call. Resources associated with the previous SQL statement are freed. In particular, a previously obtained result set is invalidated. If an empty sql string, "", was used when the Statement was created, a setSQL method with the proper SQL string must be done prior to execution.

Syntax

void setSQL(
   const string &sql);

Parameter	Description
sql	Any SQL statement.

setSQLUString()

Associate an SQL statement with this object. Unicode support: the client Environment should be initialized in OCCIUTIF16 mode.

Syntax

void setSQLUString(
   const UString &sql);

Parameter	Description
sql	A SQL statement in same character set as the connection source of the statement.

setString()

Sets a parameter for a specified index.

Syntax

void setString(
   unsigned int paramIndex,
   const string &val);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
val	The parameter value.

setTimestamp()

Sets a parameter to a Timestamp value.

Syntax

void setTimestamp(
   unsigned int paramIndex,
   const Timestamp &val);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
val	The parameter value.

setUInt()

Sets a parameter to a C++ unsigned int value.

Syntax

void setUInt(
   unsigned int paramIndex,
   unsigned int val);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
val	The parameter value.

setUString()

Sets a parameter for a specified index; globalization enabled.

Syntax

void setUString(
   unsigned int paramIndex,
   const UString &val);

Parameter	Description
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
val	The parameter value.

setVector()

Sets a parameter to a vector. This method should be used when the type is a collection type, varrays or nested tables. The SQL Type of the elements in the collection should be compatible with the type of the vector. For example, if the collection is a varray of VARCHAR2, use vector<string>.

Syntax	Description
void setVector( Statement *stmt, unsigned int paramIndex, const vector< T > &vect, const string &schemaName, const string &typeName);	Intended for use on platforms where partial ordering of function templates is not supported, such as Windows NT. Multibyte support.
void setVector( Statement stmt, unsigned int paramIndex, const vector<T > &vect, const string &schemaName, const string &typeName);	Intended for use on platforms where partial ordering of function templates is supported. Multibyte support.
void setVector( Statement *stmt, unsigned int paramIndex, const vector<BDouble> &vect const string &sqltype);	Sets a `BDouble` vector.
void setVector( Statement *stmt, unsigned int paramIndex, const vector<Bfile> &vect, const string &schemaName, const string &typeName);	Sets a `const Bfile` vector; multibyte support.
void setVector( Statement *stmt, unsigned int paramIndex, const vector<Bfile> &vect, const UString &schemaName, const UString &typeName);	Sets a `const BFile` vector; UTF16 support.
void setVector( Statement *stmt, unsigned int paramIndex, const vector<BFloat> &vect const string &sqltype);	Sets a `BFloat` vector.
void setVector( Statement *stmt, unsigned int paramIndex, const vector<Blob> &vect, const string &schemaName, const string &typeName);	Sets a `const Blob` vector; multibyte support.
void setVector( Statement *stmt, unsigned int paramIndex, const vector<Blob> &vect, const UString &schemaName, const UString &typeName);	Sets a `const Blob` vector; UTF16 support.
void setVector( Statement *stmt, unsigned int paramIndex, const vector<Clob> &vect, const string &schemaName, const string &typeName);	Sets a `const Clob` vector; multibyte support.
void setVector( Statement *stmt, unsigned int paramIndex, const vector<Clob> &vect, const UString &schemaName, const UString &typeName);	Sets a `const Clob` vector; UTF16 support.
void setVector( Statement *stmt, unsigned int paramIndex, const vector<Date> &vect, const string &schemaName, const string &typeName);	Sets a `const Date` vector; multibyte support.
void setVector( Statement *stmt, unsigned int paramIndex, const vector<Date> &vect, const UString &schemaName, const UString &typeName);	Sets a `const Date` vector; UTF16 support.
void setVector( Statement *stmt, unsigned int paramIndex, const vector<double> &vect, const string &schemaName, const string &typeName);	Sets a `const double` vector; multibyte support.
void setVector( Statement *stmt, unsigned int paramIndex, const vector<double> &vect, const UString &schemaName, const UString &typeName);	Sets a `const double` vector; UTF16 support.
void setVector( Statement *stmt, unsigned int paramIndex, const vector<float> &vect, const string &schemaName, const string &typeName);	Sets a `const float` vector; multibyte support.
void setVector( Statement *stmt, unsigned int paramIndex, const vector<float> &vect, const UString &schemaName, const UString &typeName);	Sets a `const float` vector; UTF16 support.
void setVector( Statement *stmt, unsigned int paramIndex, const vector<int> &vect, const string &schemaName, const string &typeName);	Sets a `const int` vector; multibyte support.
void setVector( Statement *stmt, unsigned int paramIndex, const vector<int> &vect, const UString &schemaName, const UString &typeName);	Sets a `const int` vector; UTF16 support.
void setVector( Statement *stmt, unsigned int paramIndex, const vector<IntervalDS> &vect, const string &schemaName, const string &typeName);	Sets a `const IntervalDS` vector; multibyte support.
void setVector( Statement *stmt, unsigned int paramIndex, const vector<IntervalDS> &vect, const UString &schemaName, const UString &typeName);	Sets a `const IntervalDS` vector; UTF16 support.
void setVector( Statement *stmt, unsigned int paramIndex, const vector<IntervalYM> &vect, const string &schemaName, const string &typeName);	Sets a `const IntervalYM` vector; multibyte support.
void setVector( Statement *stmt, unsigned int paramIndex, const vector<IntervalYM> &vect, const UString &schemaName, const UString &typeName);	Sets a `const IntervalYM` vector; UTF16 support
void setVector( Statement *stmt, unsigned int paramIndex, const vector<Number> &vect, const string &schemaName, const string &typeName);	Sets a `const Number` vector; multibyte support.
void setVector( Statement *stmt, unsigned int paramIndex, const vector<Number> &vect, const UString &schemaName, const UString &typeName);	Sets a `const Number` vector; UTF16 support.
void setVector( Statement *stmt, unsigned int paramIndex, const vector<RefAny> &vect, const string &schemaName, const string &typeName);	Sets a `const RefAny` vector; multibyte support.
void setVector( Statement *stmt, unsigned int paramIndex, const vector<RefAny> &vect, const UString &schemaName, const UString &typeName);	Sets a `const RefAny` vector; UTF16 support.
void setVector( Statement *stmt, unsigned int paramIndex, const vector<string> &vect, const string &schemaName, const string &typeName);	Sets a `const string` vector; multibyte support.
void setVector( Statement *stmt, unsigned int paramIndex, const vector<string> &vect, const UString &schemaName, const UString &typeName);	Sets a `const string` vector; UTF16 support.
void setVector( Statement *stmt, unsigned int paramIndex, const vector<Timestamp> &vect, const string &schemaName, const string &typeName);	Sets a `const Timestamp` vector; multibyte support.
void setVector( Statement *stmt, unsigned int paramIndex, const vector<Timestamp> &vect, const UString &schemaName, const UString &typeName);	Sets a `const Timestamp` vector; UTF16 support.
void setVector( Statement *stmt, unsigned int paramIndex, const vector<unsigned int> &vect, const string &schemaName, const string &typeName);	Sets a `const unsigned int` vector; multibyte support.
void setVector( Statement *stmt, unsigned int paramIndex, const vector<unsigned int> &vect, const UString &schemaName, const UString &typeName);	Sets a `const unsigned int` vector; UTF16 support.
void setVector( Statement *stmt, unsigned int paramIndex, vector<Bfile> &vect, string &sqltype);	Sets a `Bfile` vector.
void setVector( Statement *stmt, unsigned int paramIndex, vector<Blob> &vect, string &sqltype);	Sets a `Blob` vector.
void setVector( Statement *stmt, unsigned int paramIndex, vector<Clob> &vect, string &sqltype);	Sets a `Clob` vector.
void setVector( Statement *stmt, unsigned int paramIndex, vector<Date> &vect, string &sqltype);	Sets a `Date` vector.
void setVector( Statement *stmt, unsigned int paramIndex, vector<double> &vect, string &sqltype);	Sets a `double` vector.
void setVector( Statement *stmt, unsigned int paramIndex, vector<float> &vect, string &sqltype);	Sets a `float` vector.
void setVector( Statement *stmt, unsigned int paramIndex, vector<int> &vect, string &sqltype);	Sets an `int` vector .
void setVector( Statement *stmt, unsigned int paramIndex, vector<IntervalDS> &vect, string &sqltype);	Sets an `IntervalDS` vector.
void setVector( Statement *stmt, unsigned int paramIndex, vector<IntervalYM> &vect, string &sqltype);	Sets an `IntervalYM` vector.
void setVector( Statement *stmt, unsigned int paramIndex, vector<Number> &vect, string &sqltype);	Sets a `Number` vector.
void setVector( Statement *stmt, unsigned int paramIndex, vector<RefAny> &vect, string &sqltype);	Sets a `RefAn`y vector.
void setVector( Statement *stmt, unsigned int paramIndex, vector<string> &vect, string &sqltype);	Sets a `string` vector.
void setVector( Statement *stmt, unsigned int paramIndex, vector<Timestamp> &vect, string &sqltype);	Sets a `Timestamp` vector.
void setVector( Statement *stmt, unsigned int paramIndex, vector<unsigned int> &vect, string &sqltype);	Sets an `unsigned int` vector.
template <class T> void setVector( Statement stmt, unsigned int paramIndex, const vector< T > &vect, const string &sqltype);	Intended for use on platforms where partial ordering of function templates is not supported.
template <class T> void setVector( Statement *stmt, unsigned int paramIndex, const vector<T> &vect, const string &sqltype);	Intended for use on platforms where partial ordering of function templates is supported.
template <class T> void setVector( Statement *stmt, unsigned int paramIndex, vector<Ref<T>> &vect, string &sqltype);	Available only on platforms where partial ordering of function templates is supported. setVectorOfRefs() can be used instead.

Parameter	Description
stmt	Statement on which parameter is to be set.
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
vect	The vector to be set.
sqltype	Sqltype of the collection in the database. For example, `CREATE TYPE num_coll AS VARRAY OF NUMBER`. And the column/parameter type is `num_coll`. The sqltype would be `num_coll`.
schemaName	Name of the schema used
typeName	Type

setVectorOfRefs()

Sets a parameter to a vector; should be used when the type is a collection of REFs or nested tables of REFs.

Syntax	Description
template <class T> void setVectorOfRefs( Statement *stmt, unsigned int paramIndex, const vector<Ref<T> > &vect, const string &sqltype);	Sets a parameter to a vector; should be used when the type is a collection of `REF`s are varrays or nested tables of `REF`s.
template <class T> void setVectorOfRefs( Statement *stmt, unsigned int paramIndex, const vector<Ref<T> > &vect, const string &sqltype);	Used for multibyte support.
template <class T> void setVectorOfRefs( Statement *stmt, unsigned int paramIndex, const vector<Ref<T>> &vect, const string &schemaName, const string &typeName);	Used for multibyte support.
template <class T> void setVectorOfRefs( Statement *stmt, unsigned int paramIndex, const vector<Ref<T> &vect, const UString &schemaName, const UString &typeName);	Used for UTF16 support on platforms where partial ordering of function templates is not supported, such as Windows NT.
template <class T> void setVector( Statement stmt, unsigned int paramIndex, const vector<T > &vect, const UString &schemaName, const UString &typeName);	Used for UTF16 support on platforms where partial ordering of function templates is supported.

Parameter	Description
stmt	Statement on which parameter is to be set.
paramIndex	Parameter index; first parameter is 1, second is 2, and so on.
vect	Vector to be set.
sqltype	Sqltype of the parameter or column. Use setVectorOfRefs() instead of specialized function setVector() for `Ref<T>`.
schemaName	Name of the schema used
typeName	Type

status()

Returns the current status of the statement. Useful when there is streamed data to be written (or read). Other methods such as getCurrentStreamParam() and getCurrentIteration() can be called to find out the streamed parameter that needs to be written and the current iteration number for an iterative or array execute. The status()method can be called repeatedly to find out the status of the execution.

The returned value, Status, is defined in Table 12-42.

Syntax

Status status() const;