3 Oracle Text CONTAINS Query Operators

ABOUT

General Behavior

Use the ABOUT operator to return documents that are related to a query term or phrase. In English and French, ABOUT enables you to query on concepts, even if a concept is not actually part of a query. For example, an ABOUT query on heat might return documents related to temperature, even though the term temperature is not part of the query.

In other languages, using ABOUT will often increase the number of returned documents and may improve the sorting order of results. For all languages, Oracle Text scores results for an ABOUT query with the most relevant document receiving the highest score.

English and French Behavior

In English and French, use the ABOUT operator to query on concepts. The system looks up concept information in the theme component of the index. You create a theme component to your index by setting the INDEX_THEMES BASIC_LEXER attribute to YES.

Oracle Text retrieves documents that contain concepts that are related to your query word or phrase. For example, if you issue an ABOUT query on California, the system might return documents that contain the terms Los Angeles and San Francisco, which are cities in California.The document need not contain the term California to be returned in this ABOUT query.

The word or phrase specified in your ABOUT query need not exactly match the themes stored in the index. Oracle Text normalizes the word or phrase before performing lookup in the index.

You can use the ABOUT operator with the CONTAINS and CATSEARCH SQL operators. In the case of CATSEARCH, you must use query templating with the CONTEXT grammar to query on the indexed themes. See ABOUT Query with CATSEARCH in the Examples section.

Syntax

Case-Sensitivity

ABOUT queries give the best results when your query is formulated with proper case. This is because the normalization of your query is based on the knowledge catalog which is case-sensitive.

However, you need not type your query in exact case to obtain results from an ABOUT query. The system does its best to interpret your query. For example, if you enter a query of CISCO and the system does not find this in the knowledge catalog, the system might use Cisco as a related concept for look-up.

Improving ABOUT Results

The ABOUT operator uses the supplied knowledge base in English and French to interpret the phrase you enter. Your ABOUT query therefore is limited to knowing and interpreting the concepts in the knowledge base.

You can improve the results of your ABOUT queries by adding your application-specific terminology to the knowledge base.

Limitations

• The phrase you specify in an ABOUT query cannot be more than 4000 characters.

Examples

Single Words

To search for documents that are about soccer, use the following syntax:

'about(soccer)'

Phrases

You can further refine the query to include documents about soccer rules in international competition by entering the phrase as the query term:

'about(soccer rules in international competition)'

In this English example, Oracle Text returns all documents that have themes of soccer, rules, or international competition.

In terms of scoring, documents which have all three themes will generally score higher than documents that have only one or two of the themes.

Unstructured Phrases

You can also query on unstructured phrases, such as the following:

'about(japanese banking investments in indonesia)'

Combined Queries

You can use other operators, such as AND or NOT, to combine ABOUT queries with word queries.

For example, you can issue the following combined ABOUT and word query:

'about(dogs) and cat'

You can combine an ABOUT query with another ABOUT query as follows:

'about(dogs) not about(labradors)'

ABOUT Query with CATSEARCH

You can issue ABOUT queries with CATSEARCH using the query template method with grammar set to CONTEXT as follows:

select pk||' ==> '||text from test
where catsearch(text,
'<query> 
  <textquery grammar="context">
     about(California)
  </textquery>
  <score datatype="integer"/>
</query>','')>0
order by pk; 

ACCUMulate ( , )

Use the ACCUM operator to search for documents that contain at least one occurrence of any query terms, with the returned documents ranked by a cumulative score based on how many query terms are found (and how frequently).

Syntax

ACCUMulate Scoring

ACCUMulate first scores documents on how many query terms a document matches. A document that matches more terms will always score higher than a document that matches fewer terms, even if the terms appear more frequently in the latter. In other words, if you search for dog ACCUM cat, you'll find that

the dog played with the cat 

scores higher than

the big dog played with the little dog while a third dog ate the dog food

Scores are divided into ranges. In a two-term ACCUM, hits that match both terms will always score between 51 and 100, whereas hits matching only one of the terms will score between 1 and 50. Likewise, for a three-term ACCUM, a hit matching one term will score between 1 and 33; a hit matching two terms will score between 34 and 66, and a hit matching all three terms will score between 67 and 100. Within these ranges, normal scoring algorithms apply. (See Appendix F, " The Oracle Text Scoring Algorithm" for more on how scores are calculated.)

You can assign different weights to different terms. For example, in a query of the form

soccer, Brazil*3

the term Brazil is weighted three times as heavily as soccer. Therefore, the document

people play soccer because soccer is challenging and fun 

will score lower than

Brazil is the largest nation in South America

but both documents will rank below

soccer is the national sport of Brazil

Note that a query of soccer ACCUM Brazil*3 is equivalent to soccer ACCUM Brazil ACCUM Brazil ACCUM Brazil. Since each query term Brazil is considered independent, the entire query is scored as though it has four terms, not two, and thus has four scoring ranges. The first Brazil-and-soccer example document shown above will score in the first range (1-25), the second will score in the third range (51-75), and the third will score in the fourth range (76-100). (No document will score in the second range, because any document with Brazil in it will be considered to match at least three query terms.)

Example

set serveroutput on;
DROP TABLE accumtbl;
CREATE TABLE accumtbl (id NUMBER, text VARCHAR2(4000) );
 
INSERT INTO accumtbl VALUES ( 1, 'the little dog played with the big dog 
      while the other dog ate the dog food');
INSERT INTO accumtbl values (2, 'the cat played with the dog');
 
CREATE INDEX accumtbl_idx ON accumtbl (text) indextype is ctxsys.context;
  
PROMPT dog ACCUM cat
SELECT SCORE(10) FROM accumtbl WHERE CONTAINS (text, 'dog ACCUM cat', 10)
   > 0;
 
PROMPT dog*3 ACCUM cat
SELECT SCORE(10) FROM accumtbl WHERE CONTAINS (text, 'dog*3 ACCUM cat', 10)
   > 0;

This produces the following output. Note that the document with both dog and cat scores highest.

dog ACCUM cat
   ID  SCORE(10)
----- ----------
    1          6
    2         52
 
dog*3 ACCUM cat
   ID  SCORE(10)
----- ----------
    1         53
    2         76
        

Related Topics

See also weight (*)

AND (&)

Use the AND operator to search for documents that contain at least one occurrence of each of the query terms.

Syntax

Examples

To obtain all the documents that contain the terms blue and black and red, issue the following query:

'blue & black & red'

In an AND query, the score returned is the score of the lowest query term. In this example, if the three individual scores for the terms blue, black, and red is 10, 20 and 30 within a document, the document scores 10.

Related Topics

Broader Term (BT, BTG, BTP, BTI)

Use the broader term operators (BT, BTG, BTP, BTI) to expand a query to include the term that has been defined in a thesaurus as the broader or higher level term for a specified term. They can also expand the query to include the broader term for the broader term and the broader term for that broader term, and so on up through the thesaurus hierarchy.

Syntax

term

Specify the operand for the broader term operator. Oracle Text expands term to include the broader term entries defined for the term in the thesaurus specified by thes. For example, if you specify BTG(dog), the expansion includes only those terms that are defined as broader term generic for dog. You cannot specify expansion operators in the term argument.

The number of broader terms included in the expansion is determined by the value for level.

qualifier

Specify a qualifier for term, if term is a homograph (word or phrase with multiple meanings, but the same spelling) that appears in two or more nodes in the same hierarchy branch of thes.

If a qualifier is not specified for a homograph in a broader term query, the query expands to include the broader terms of all the homographic terms.

level

Specify the number of levels traversed in the thesaurus hierarchy to return the broader terms for the specified term. For example, a level of 1 in a BT query returns the broader term entry, if one exists, for the specified term. A level of 2 returns the broader term entry for the specified term, as well as the broader term entry, if one exists, for the broader term.

The level argument is optional and has a default value of one (1). Zero or negative values for the level argument return only the original query term.

thes

Specify the name of the thesaurus used to return the expansions for the specified term. The thes argument is optional and has a default value of DEFAULT. A thesaurus named DEFAULT must exist in the thesaurus tables if you use this default value.

Note: If you specify thes, you must also specify level.

Examples

The following query returns all documents that contain the term tutorial or the BT term defined for tutorial in the DEFAULT thesaurus:

'BT(tutorial)'

When you specify a thesaurus name, you must also specify level as in:

'BT(tutorial, 2, mythes)'

Broader Term Operator on Homographs

If machine is a broader term for crane (building equipment) and bird is a broader term for crane (waterfowl) and no qualifier is specified for a broader term query, the query

BT(crane) 

expands to:

'{crane} or {machine} or {bird}'

If waterfowl is specified as a qualifier for crane in a broader term query, the query

BT(crane{(waterfowl)}) 

expands to the query:

'{crane} or {bird}' 

Related Topics

You can browse a thesaurus using procedures in the CTX_THES package.

EQUIValence (=)

Use the EQUIV operator to specify an acceptable substitution for a word in a query.

Syntax

Examples

The following example returns all documents that contain either the phrase alsatians are big dogs or labradors are big dogs:

'labradors=alsatians are big dogs'

Operator Precedence

The EQUIV operator has higher precedence than all other operators except the expansion operators (fuzzy, soundex, stem).

Fuzzy

Use the fuzzy operator to expand queries to include words that are spelled similarly to the specified term. This type of expansion is helpful for finding more accurate results when there are frequent misspellings in your document set.

The fuzzy syntax enables you to rank the result set so that documents that contain words with high similarity to the query word are scored higher than documents with lower similarity. You can also limit the number of expanded terms.

Unlike stem expansion, the number of words generated by a fuzzy expansion depends on what is in the index. Results can vary significantly according to the contents of the index.

Supported Languages

Oracle Text supports fuzzy definitions for English, German, Italian, Dutch, Spanish, Japanese, Korean, Chinese, OCR, and auto-language detection.

Stopwords

If the fuzzy expansion returns a stopword, the stopword is not included in the query or highlighted by CTX_DOC.HIGHLIGHT or CTX_DOC.MARKUP.

Base-Letter Conversion

If base-letter conversion is enabled for a text column and the query expression contains a fuzzy operator, Oracle Text operates on the base-letter form of the query.

Syntax

fuzzy(term, score, numresults, weight)

Examples

Consider the CONTAINS query:

...CONTAINS(TEXT, 'fuzzy(government, 70, 6, weight)', 1) > 0;

This query expands to the first six fuzzy variations of government in the index that have a similarity score over 70.

In addition, documents in the result set are weighted according to their similarity to government. Documents containing words most similar to government receive the highest score.

You can skip unnecessary parameters using the appropriate number of commas. For example:

'fuzzy(government,,,weight)'

Backward Compatibility Syntax

The old fuzzy syntax from previous releases is still supported. This syntax is as follows:

HASPATH

Use this operator to find all XML documents that contain a specified section path. You can also use this operator to do section equality testing.

Your index must be created with the PATH_SECTION_GROUP for this operator to work.

Syntax

Example

Path Testing

The query

HASPATH(A/B/C)

finds and returns a score of 100 for the document

<A><B><C>dog</C></B></A>

without the query having to reference dog at all.

Section Equality Testing

The query

dog INPATH A

finds

<A>dog</A>

but it also finds

<A>dog park</A>

To limit the query to the term dog and nothing else, you can use a section equality test with the HASPATH operator. For example,

HASPATH(A="dog")

finds and returns a score of 100 only for the first document, and not the second.

Limitations

Because of how XML section data is recorded, false matches might occur with XML sections that are completely empty as follows:

<A><B><C></C></B><D><E></E></D></A>

A query of HASPATH(A/B/E) or HASPATH(A/D/C) falsely matches this document. This type of false matching can be avoided by inserting text between empty tags.

INPATH

Use this operator to do path searching in XML documents. This operator is like the WITHIN operator except that the right-hand side is a parentheses enclosed path, rather than a single section name.

Your index must be created with the PATH_SECTION_GROUP for the INPATH operator to work.

Syntax

The INPATH operator has the following syntax:

Top-Level Tag Searching

Any-Level Tag Searching

Direct Parentage Path Searching

Single-Level Wildcard Searching

Multi-level Wildcard Searching

Any-Level Descendant Searching

Attribute Searching

Descendant/Attribute Existence Testing

Attribute Value Testing

Tag Value Testing

Not

AND and OR Testing

Combining Path and Node Tests

Nested INPATH

You can nest the entire INPATH expression in another INPATH expression as follows:

(dog INPATH (//A/B/C)) INPATH (D)

When you do so, the two INPATH paths are completely independent. The outer INPATH path does not change the context node of the inner INPATH path. For example:

(dog INPATH (A)) INPATH (D)

never finds any documents, because the inner INPATH is looking for dog within the top-level tag A, and the outer INPATH constrains that to document with top-level tag D. A document can have only one top-level tag, so this expression never finds any documents.

Case-Sensitivity

Tags and attribute names in path searching are case-sensitive. That is,

dog INPATH (A)

finds <A>dog</A> but does not find <a>dog</a>. Instead use

dog INPATH (a)

Examples

Top-Level Tag Searching

To find all documents that contain the term dog in the top-level tag <A>:

dog INPATH (/A)

or

dog INPATH(A)

Any-Level Tag Searching

To find all documents that contain the term dog in the <A> tag at any level:

dog INPATH(//A)

This query finds the following documents:

<A>dog</A>

and

<C><B><A>dog</A></B></C>

Direct Parentage Searching

To find all documents that contain the term dog in a B element that is a direct child of a top-level A element:

dog INPATH(A/B)

This query finds the following XML document:

<A><B>My dog is friendly.</B><A>

but does not find:

<C><B>My dog is friendly.</B></C>

Tag Value Testing

You can test the value of tags. For example, the query:

dog INPATH(A[B="dog"])

Finds the following document:

<A><B>dog</B></A>

But does not find:

<A><B>My dog is friendly.</B></A>

Attribute Searching

You can search the content of attributes. For example, the query:

dog INPATH(//A/@B)

Finds the document

<C><A  B="snoop dog"> </A> </C>

Attribute Value Testing

You can test the value of attributes. For example, the query

California INPATH (//A[@B = "home address"])

Finds the document:

<A B="home address">San Francisco, California, USA</A>

But does not find:

<A B="work address">San Francisco, California, USA</A>

Path Testing

You can test if a path exists with the HASPATH operator. For example, the query:

HASPATH(A/B/C)

finds and returns a score of 100 for the document

<A><B><C>dog</C></B></A>

without the query having to reference dog at all.

Limitations

Testing for Equality

The following is an example of an INPATH equality test.

dog INPATH (A[@B = "foo"])

The following limitations apply for these expressions:

• Only equality and inequality are supported. Range operators and functions are not supported.

• The left hand side of the equality must be an attribute. Tags and literals here are not enabled.

• The right hand side of the equality must be a literal. Tags and attributes here are not allowed.

• The test for equality depends on your lexer settings. With the default settings, the query

  dog INPATH (A[@B= "pot of gold"])
  
  

  matches the following sections:

  <A B="POT OF GOLD">dog</A>
  

  and

  <A B="pot of gold">dog</A>
  

  because lexer is case-insensitive by default.

  <A B="POT IS GOLD">dog</A>
  

  because of and is are default stopwords in English, and a stopword matches any stopword word.

  <A B="POT_OF_GOLD">dog</A>
  

  because the underscore character is not a join character by default.

MDATA

Use the MDATA operator to query documents that contain MDATA sections. MDATA sections are metadata that have been added to documents to speed up mixed querying.

MDATA queries are treated exactly as literals. For example, with the query

MDATA(price, $1.24)

the $ is not interpreted as a stem operator, nor is the . (period) transformed into whitespace. A right (close) parenthesis terminates the MDATA operator, so that MDATA values that have close parentheses cannot be searched.

Syntax

sectionname

The name of the MDATA section(s) to search.

value

The value of the MDATA section. For example, if an MDATA section called Booktype has been created, it might have a value of paperback.

Example

Suppose you want to query for books written by the writer Nigella Lawson that contain the word summer. Assuming that an MDATA section called AUTHOR has been declared, you can query as follows:

SELECT id FROM idx_docs
  WHERE CONTAINS(text, 'summer AND MDATA(author, Nigella Lawson)')>0

This query will only be successful if an AUTHOR tag has the exact value Nigella Lawson (after simplified tokenization). Nigella or Ms. Nigella Lawson will not work.

Notes

MDATA query values ignore stopwords.

The MDATA operator returns 100 or 0, depending on whether the document is a match.

The MDATA operator is not supported for CTXCAT, CTXRULE, or CTXXPATH indexes.

Table 3-1 shows how MDATA interacts with some other query operators:

When MDATA sections repeat, each instance is a separate and independent value. For instance, the document

<AUTHOR>Terry Pratchett</AUTHOR><AUTHOR>Douglas Adams</AUTHOR>

can be found with any of the following queries:

MDATA(author, Terry Pratchett)
MDATA(author, Douglas Adams)
MDATA(author, Terry Pratchett) and MDATA(author, Douglas Adams)

but not any of the following:

MDATA(author, Terry Pratchett Douglas Adams)
MDATA(author, Terry Pratchett & Douglas Adams)
MDATA(author, Pratchett Douglas)

Related Topics

See also "ADD_MDATA" and "ADD_MDATA_SECTION", as well as the Section Searching chapter of the Oracle Text Application Developer's Guide.

MINUS (-)

Use the MINUS operator to lower the score of documents that contain unwanted noise terms. MINUS is useful when you want to search for documents that contain one query term but want the presence of a second term to cause a document to be ranked lower.

Syntax

Examples

Suppose a query on the term cars always returned high scoring documents about Ford cars. You can lower the scoring of the Ford documents by using the expression:

'cars - Ford'

In essence, this expression returns documents that contain the term cars and possibly Ford. However, the score for a returned document is the score of cars minus the score of Ford.

Related Topics

Narrower Term (NT, NTG, NTP, NTI)

Use the narrower term operators (NT, NTG, NTP, NTI) to expand a query to include all the terms that have been defined in a thesaurus as the narrower or lower level terms for a specified term. They can also expand the query to include all of the narrower terms for each narrower term, and so on down through the thesaurus hierarchy.

Syntax

term

Specify the operand for the narrower term operator. term is expanded to include the narrower term entries defined for the term in the thesaurus specified by thes. The number of narrower terms included in the expansion is determined by the value for level. You cannot specify expansion operators in the term argument.

qualifier

Specify a qualifier for term, if term is a homograph (word or phrase with multiple meanings, but the same spelling) that appears in two or more nodes in the same hierarchy branch of thes.

If a qualifier is not specified for a homograph in a narrower term query, the query expands to include all of the narrower terms of all homographic terms.

level

Specify the number of levels traversed in the thesaurus hierarchy to return the narrower terms for the specified term. For example, a level of 1 in an NT query returns all the narrower term entries, if any exist, for the specified term. A level of 2 returns all the narrower term entries for the specified term, as well as all the narrower term entries, if any exist, for each narrower term.

The level argument is optional and has a default value of one (1). Zero or negative values for the level argument return only the original query term.

thes

Specify the name of the thesaurus used to return the expansions for the specified term. The thes argument is optional and has a default value of DEFAULT. A thesaurus named DEFAULT must exist in the thesaurus tables if you use this default value.

Note: If you specify thes, you must also specify level.

Examples

The following query returns all documents that contain either the term cat or any of the NT terms defined for cat in the DEFAULT thesaurus:

'NT(cat)'

If you specify a thesaurus name, you must also specify level as in:

'NT(cat, 2, mythes)'

The following query returns all documents that contain either fairy tale or any of the narrower instance terms for fairy tale as defined in the DEFAULT thesaurus:

'NTI(fairy tale)'

That is, if the terms cinderella and snow white are defined as narrower term instances for fairy tale, Oracle Text returns documents that contain fairy tale, cinderella, or snow white.

Notes

Each hierarchy in a thesaurus represents a distinct, separate branch, corresponding to the four narrower term operators. In a narrower term query, Oracle Text only expands the query using the branch corresponding to the specified narrower term operator.

Related Topics

You can browse a thesaurus using procedures in the CTX_THES package.

NEAR (;)

Use the NEAR operator to return a score based on the proximity of two or more query terms. Oracle Text returns higher scores for terms closer together and lower scores for terms farther apart in a document.

Syntax

word1-n

Specify the terms in the query separated by commas. The query terms can be single words or phrases and may make use of other query operators (see "NEAR with Other Operators").

max_span

Optionally specify the size of the biggest clump. The default is 100. Oracle Text returns an error if you specify a number greater than 100.

A clump is the smallest group of words in which all query terms occur. All clumps begin and end with a query term.

For near queries with two terms, max_span is the maximum distance allowed between the two terms. For example, to query on dog and cat where dog is within 6 words of cat, issue the following query:

'near((dog, cat), 6)'

order

Specify TRUE for Oracle Text to search for terms in the order you specify. The default is FALSE.

For example, to search for the words monday, tuesday, and wednesday in that order with a maximum clump size of 20, issue the following query:

'near((monday, tuesday, wednesday), 20, TRUE)'

Note: To specify order, you must always specify a number for the max_span parameter.

Oracle Text might return different scores for the same document when you use identical query expressions that have the order flag set differently. For example, Oracle Text might return different scores for the same document when you issue the following queries:

'near((dog, cat), 50, FALSE)'
'near((dog, cat), 50, TRUE)'

NEAR Scoring

The scoring for the NEAR operator combines frequency of the terms with proximity of terms. For each document that satisfies the query, Oracle Text returns a score between 1 and 100 that is proportional to the number of clumps in the document and inversely proportional to the average size of the clumps. This means many small clumps in a document result in higher scores, since small clumps imply closeness of terms.

The number of terms in a query also affects score. Queries with many terms, such as seven, generally need fewer clumps in a document to score 100 than do queries with few terms, such as two.

A clump is the smallest group of words in which all query terms occur. All clumps begin and end with a query term. You can define clump size with the max_span parameter as described in this section.

The size of a clump does not include the query terms themselves. So for the query NEAR((DOG, CAT), 1), dog cat will be a match, and dog ate cat will be a match, but dog sat on cat will not be a match.

NEAR with Other Operators

You can use the NEAR operator with other operators such as AND and OR. Scores are calculated in the regular way.

For example, to find all documents that contain the terms tiger, lion, and cheetah where the terms lion and tiger are within 10 words of each other, issue the following query:

'near((lion, tiger), 10) AND cheetah'

The score returned for each document is the lower score of the near operator and the term cheetah.

You can also use the equivalence operator to substitute a single term in a near query:

'near((stock crash, Japan=Korea), 20)'

This query asks for all documents that contain the phrase stock crash within twenty words of Japan or Korea.

The following operators also work with NEAR:

• EQUIV

• NEAR itself

• All expansion operators that produce words, phrases, or EQUIV. These include:

  • soundex

  • fuzzy

  • wildcards

  • stem

Backward Compatibility NEAR Syntax

You can write near queries using the syntax of previous Oracle Text releases. For example, to find all documents where lion occurs near tiger, you can write:

'lion near tiger'

or with the semi-colon as follows:

'lion;tiger'

This query is equivalent to the following query:

'near((lion, tiger), 100, FALSE)'

Highlighting with the NEAR Operator

When you use highlighting and your query contains the near operator, all occurrences of all terms in the query that satisfy the proximity requirements are highlighted. Highlighted terms can be single words or phrases.

For example, assume a document contains the following text:

Chocolate and vanilla are my favorite ice cream flavors.  I like chocolate served in a waffle cone, and vanilla served in a cup with carmel syrup.

If the query is near((chocolate, vanilla)), 100, FALSE), the following is highlighted:

<<Chocolate>> and <<vanilla>> are my favorite ice cream flavors.  I like <<chocolate>> served in a waffle cone, and <<vanilla>> served in a cup with caramel syrup.

However, if the query is near((chocolate, vanilla)), 4, FALSE), only the following is highlighted:

<<Chocolate>> and <<vanilla>> are my favorite ice cream flavors.  I like chocolate served in a waffle cone, and vanilla served in a cup with carmel syrup.

Section Searching and NEAR

You can use the NEAR operator with the WITHIN operator for section searching as follows:

'near((dog, cat), 10) WITHIN Headings'

When evaluating expressions such as these, Oracle Text looks for clumps that lie entirely within the given section.

In this example, only those clumps that contain dog and cat that lie entirely within the section Headings are counted. That is, if the term dog lies within Headings and the term cat lies five words from dog, but outside of Headings, this pair of words does not satisfy the expression and is not counted.

NOT (~)

Use the NOT operator to search for documents that contain one query term and not another.

Syntax

Examples

To obtain the documents that contain the term animals but not dogs, use the following expression:

'animals ~ dogs'

Similarly, to obtain the documents that contain the term transportation but not automobiles or trains, use the following expression:

'transportation not (automobiles or trains)'

Related Topics

OR (|)

Use the OR operator to search for documents that contain at least one occurrence of any of the query terms.

Syntax

Examples

For example, to obtain the documents that contain the term cats or the term dogs, use either of the following expressions:

'cats | dogs'
'cats OR dogs'

Scoring

In an OR query, the score returned is the score for the highest query term. In the example, if the scores for cats and dogs is 30 and 40 within a document, the document scores 40.

Related Topics

Preferred Term (PT)

Use the preferred term operator (PT) to replace a term in a query with the preferred term that has been defined in a thesaurus for the term.

Syntax

term

Specify the operand for the preferred term operator. term is replaced by the preferred term defined for the term in the specified thesaurus. However, if no PT entries are defined for the term, term is not replaced in the query expression and term is the result of the expansion.

You cannot specify expansion operators in the term argument.

thes

Specify the name of the thesaurus used to return the expansions for the specified term. The thes argument is optional and has a default value of DEFAULT. As a result, a thesaurus named DEFAULT must exist in the thesaurus tables before using any of the thesaurus operators.

Examples

The term automobile has a preferred term of car in a thesaurus. A PT query for automobile returns all documents that contain the word car. Documents that contain the word automobile are not returned.

Related Topics

You can browse a thesaurus using procedures in the CTX_THES package.

Related Term (RT)

Use the related term operator (RT) to expand a query to include all related terms that have been defined in a thesaurus for the term.

Syntax

term

Specify the operand for the related term operator. term is expanded to include term and all the related entries defined for term in thes.

You cannot specify expansion operators in the term argument.

thes

Specify the name of the thesaurus used to return the expansions for the specified term. The thes argument is optional and has a default value of DEFAULT. As a result, a thesaurus named DEFAULT must exist in the thesaurus tables before using any of the thesaurus operators.

Examples

The term dog has a related term of wolf. A RT query for dog returns all documents that contain the word dog and wolf.

Related Topics

You can browse a thesaurus using procedures in the CTX_THES package

soundex (!)

Use the soundex (!) operator to expand queries to include words that have similar sounds; that is, words that sound like other words. This function enables comparison of words that are spelled differently, but sound alike in English.

Syntax

Examples

SELECT ID, COMMENT FROM EMP_RESUME
WHERE CONTAINS (COMMENT, '!SMYTHE') > 0 ;

ID COMMENT 
-- ------------
23 Smith is a hard worker who..

Language

Soundex works best for languages that use a 7-bit character set, such as English. It can be used, with lesser effectiveness, for languages that use an 8-bit character set, such as many Western European languages.

If you have base-letter conversion specified for a text column and the query expression contains a soundex operator, Oracle Text operates on the base-letter form of the query.

stem ($)

Use the stem ($) operator to search for terms that have the same linguistic root as the query term.

If you use the BASIC_LEXER to index your language, stemming performance can be improved by using the index_stems attribute.

The Oracle Text stemmer, licensed from Xerox Corporation's XSoft Division, supports the following languages with the BASIC_LEXER: English, French, Spanish, Italian, German, and Dutch.

Japanese stemming is supported with the JAPANESE_LEXER.

You can specify your stemming language with the BASIC_WORDLIST wordlist preference.

Syntax

Examples

Behavior with Stopwords

If stem returns a word designated as a stopword, the stopword is not included in the query or highlighted by CTX_QUERY.HIGHLIGHT or CTX_QUERY.MARKUP.

Related Topics

Stored Query Expression (SQE)

Use the SQE operator to call a stored query expression created with the CTX_QUERY.STORE_SQE procedure.

Stored query expressions can be used for creating predefined bins for organizing and categorizing documents or to perform iterative queries, in which an initial query is refined using one or more additional queries.

Syntax

Examples

To create an SQE named disasters, use CTX_QUERY.STORE_SQE as follows:

begin
ctx_query.store_sqe('disasters', 'hurricane or earthquake or blizzard');
end;

This stored query expression returns all documents that contain either hurricane, earthquake or blizzard.

This SQE can then be called within a query expression as follows:

SELECT SCORE(1), docid FROM news
WHERE CONTAINS(resume, 'sqe(disasters)', 1)> 0 
ORDER BY SCORE(1);

SYNonym (SYN)

Use the synonym operator (SYN) to expand a query to include all the terms that have been defined in a thesaurus as synonyms for the specified term.

Syntax

term

Specify the operand for the synonym operator. term is expanded to include term and all the synonyms defined for term in thes.

You cannot specify expansion operators in the term argument.

thes

Specify the name of the thesaurus used to return the expansions for the specified term. The thes argument is optional and has a default value of DEFAULT. A thesaurus named DEFAULT must exist in the thesaurus tables if you use this default value.

Examples

The following query expression returns all documents that contain the term dog or any of the synonyms defined for dog in the DEFAULT thesaurus:

'SYN(dog)'

Compound Phrases in Synonym Operator

Expansion of compound phrases for a term in a synonym query are returned as AND conjunctives.

For example, the compound phrase temperature + measurement + instruments is defined in a thesaurus as a synonym for the term thermometer. In a synonym query for thermometer, the query is expanded to:

{thermometer} OR ({temperature}&{measurement}&{instruments})

Related Topics

You can browse your thesaurus using procedures in the CTX_THES package.

threshold (>)

Use the threshold operator (>) in two ways:

• at the expression level

• at the query term level

The threshold operator at the expression level eliminates documents in the result set that score below a threshold number.

The threshold operator at the query term level selects a document based on how a term scores in the document.

Syntax

Examples

At the expression level, to search for documents that contain relational databases and to return only documents that score greater than 75, use the following expression:

'relational databases > 75'

At the query term level, to select documents that have at least a score of 30 for lion and contain tiger, use the following expression:

'(lion > 30) and tiger'

Translation Term (TR)

Use the translation term operator (TR) to expand a query to include all defined foreign language equivalent terms.

Syntax

term

Specify the operand for the translation term operator. term is expanded to include all the foreign language entries defined for term in thes.You cannot specify expansion operators in the term argument.

lang

Optionally, specify which foreign language equivalents to return in the expansion. The language you specify must match the language as defined in thes. (You may specify only one language at a time.) If you omit this parameter or specify it as ALL, the system expands to use all defined foreign language terms.

thes

Optionally, specify the name of the thesaurus used to return the expansions for the specified term. The thes argument has a default value of DEFAULT. As a result, a thesaurus named DEFAULT must exist in the thesaurus tables before you can use any of the thesaurus operators.

Note: If you specify thes, you must also specify lang.

Examples

Consider a thesaurus MY_THES with the following entries for cat:

cat 
  SPANISH: gato 
  FRENCH:  chat 

To search for all documents that contain cat and the spanish translation of cat, issue the following query:

'tr(cat, spanish, my_thes)'

This query expands to:

'{cat}|{gato}'

Related Topics

You can browse a thesaurus using procedures in the CTX_THES package.

Translation Term Synonym (TRSYN)

Use the translation term operator (TR) to expand a query to include all the defined foreign equivalents of the query term, the synonyms of query term, and the foreign equivalents of the synonyms.

Syntax

term

Specify the operand for this operator. term is expanded to include all the foreign language entries and synonyms defined for term in thes.You cannot specify expansion operators in the term argument.

lang

Optionally, specify which foreign language equivalents to return in the expansion. The language you specify must match the language as defined in thes. If you omit this parameter, the system expands to use all defined foreign language terms.

thes

Optionally, specify the name of the thesaurus used to return the expansions for the specified term. The thes argument has a default value of DEFAULT. As a result, a thesaurus named DEFAULT must exist in the thesaurus tables before you can use any of the thesaurus operators.

Note: If you specify thes, you must also specify lang.

Examples

Consider a thesaurus MY_THES with the following entries for cat:

cat 
  SPANISH: gato 
  FRENCH:  chat 
  SYN lion 
    SPANISH: leon 

To search for all documents that contain cat, the spanish equivalent of cat, the synonym of cat, and the spanish equivalent of lion, issue the following query:

'trsyn(cat, spanish, my_thes)'

This query expands to:

'{cat}|{gato}|{lion}|{leon}'

Related Topics

You can browse a thesaurus using procedures in the CTX_THES package.

Top Term (TT)

Use the top term operator (TT) to replace a term in a query with the top term that has been defined for the term in the standard hierarchy (Broader Term [BT], Narrower Term [NT]) in a thesaurus. A top term is the broadest conceptual term related to a given query term. For example, a thesaurus might define the following hierarchy:

DOG 
   BT1 CANINE 
     BT2 MAMMAL 
       BT3 VERTEBRATE 
         BT4 ANIMAL

The top term for dog in this thesaurus is animal.

Top terms in the generic (BTG, NTG), partitive (BTP, NTP), and instance (BTI, NTI) hierarchies are not returned.

Syntax

term

Specify the operand for the top term operator. term is replaced by the top term defined for the term in the specified thesaurus. However, if no TT entries are defined for term, term is not replaced in the query expression and term is the result of the expansion.

You cannot specify expansion operators in the term argument.

thes

Specify the name of the thesaurus used to return the expansions for the specified term. The thes argument is optional and has a default value of DEFAULT. A thesaurus named DEFAULT must exist in the thesaurus tables if you use this default value.

Examples

The term dog has a top term of animal in the standard hierarchy of a thesaurus. A TT query for dog returns all documents that contain the phrase animal. Documents that contain the word dog are not returned.

Related Topics

You can browse your thesaurus using procedures in the CTX_THES package.

weight (*)

The weight operator multiplies the score by the given factor, topping out at 100 when the score exceeds 100. For example, the query cat, dog*2 sums the score of cat with twice the score of dog, topping out at 100 when the score is greater than 100.

In expressions that contain more than one query term, use the weight operator to adjust the relative scoring of the query terms. You can reduce the score of a query term by using the weight operator with a number less than 1; you can increase the score of a query term by using the weight operator with a number greater than 1 and less than 10.

The weight operator is useful in ACCUMulate ( , ), AND (&), or OR (|) queries when the expression has more than one query term. With no weighting on individual terms, the score cannot tell you which of the query terms occurs the most. With term weighting, you can alter the scores of individual terms and hence make the overall document ranking reflect the terms you are interested in.

Syntax

Examples

You have a collection of sports articles. You are interested in the articles about soccer, in particular Brazilian soccer. It turns out that a regular query on soccer or Brazil returns many high ranking articles on US soccer. To raise the ranking of the articles on Brazilian soccer, you can issue the following query:

'soccer or Brazil*3'

Table 3-2 illustrates how the weight operator can change the ranking of three hypothetical documents A, B, and C, which all contain information about soccer. The columns in the table show the total score of four different query expressions on the three documents.

The score in the third column containing the query soccer or Brazil is the score of the highest scoring term. The score in the fourth column containing the query soccer or Brazil*3 is the larger of the score of the first column soccer and of the score Brazil multiplied by three, Brazil*3.

With the initial query of soccer or Brazil, the documents are ranked in the order C B A. With the query of soccer or Brazil*3, the documents are ranked B C A, which is the preferred ranking.

Weights can be added to multiple terms. The query Brazil OR (soccer AND Brazil)*3 will increase the relative scores for documents that contain both soccer and Brazil.

wildcards (% _)

Wildcard characters can be used in query expressions to expand word searches into pattern searches. The wildcard characters are:

The total number of wildcard expansions from all words in a query containing unescaped wildcard characters cannot exceed the maximum number of expansions specified by the BASIC_WORDLIST attribute WILDCARD_MAXTERMS. For more information, see "BASIC_WORDLIST".

Right-Truncated Queries

Right truncation involves placing the wildcard on the right-hand-side of the search string.

For example, the following query expression finds all terms beginning with the pattern scal:

'scal%'

Left- and Double-Truncated Queries

Left truncation involves placing the wildcard on the left-hand-side of the search string.

To find words such as king, wing or sing, you can write your query as follows:

'_ing'

For all words that end with ing, you can issue:

'%ing'

You can also combine left-truncated and right-truncated searches to create double-truncated searches. The following query finds all documents that contain words that contain the substring %benz%

'%benz%'

Improving Wildcard Query Performance

You can improve wildcard query performance by adding a substring or prefix index.

When your wildcard queries are left- and double-truncated, you can improve query performance by creating a substring index. Substring indexes improve query performance for all types of left-truncated wildcard searches such as %ed, _ing, or %benz%.

When your wildcard queries are right-truncated, you can improve performance by creating a prefix index. A prefix index improves query performance for wildcard searches such as to%.

WITHIN

You can use the WITHIN operator to narrow a query down into document sections. Document sections can be one of the following:

• zone sections

• field sections

• attribute sections

• special sections (sentence or paragraph)

Syntax

WITHIN Limitations

The WITHIN operator has the following limitations:

• You cannot embed the WITHIN clause in a phrase. For example, you cannot write: term1 WITHIN section term2

• Since WITHIN is a reserved word, you must escape the word with braces to search on it.

WITHIN Operator Examples

Querying Within Zone Sections

To find all the documents that contain the term San Francisco within the section Headings, write your query as follows:

'San Francisco WITHIN Headings'

To find all the documents that contain the term sailing and contain the term San Francisco within the section Headings, write your query in one of two ways:

'(San Francisco WITHIN Headings) and sailing'

'sailing and San Francisco WITHIN Headings'

Compound Expressions with WITHIN

To find all documents that contain the terms dog and cat within the same section Headings, write your query as follows:

'(dog and cat) WITHIN Headings'

This query is logically different from:

'dog WITHIN Headings and cat WITHIN Headings'

This query finds all documents that contain dog and cat where the terms dog and cat are in Headings sections, regardless of whether they occur in the same Headings section or different sections.

Near with WITHIN

To find all documents in which dog is near cat within the section Headings, write your query as follows:

'dog near cat WITHIN Headings'

Nested WITHIN Queries

You can nest the within operator to search zone sections within zone sections.

For example, assume that a document set had the zone section AUTHOR nested within the zone BOOK section. You write a nested WITHIN query to find all occurrences of scott within the AUTHOR section of the BOOK section as follows:

'(scott WITHIN AUTHOR) WITHIN BOOK'

Querying Within Field Sections

The syntax for querying within a field section is the same as querying within a zone section. The syntax for most of the examples given in the previous section, "Querying Within Zone Sections", apply to field sections.

However, field sections behave differently from zone sections in terms of

• Visibility: You can make text within a field section invisible.

• Repeatability: WITHIN queries cannot distinguish repeated field sections.

• Nestability: You cannot issue a nested WITHIN query with a field section.

The following sections describe these differences.

Visible Flag in Field Sections

When a field section is created with the visible flag set to FALSE in CTX_DDL.ADD_FIELD_SECTION, the text within a field section can only be queried using the WITHIN operator.

For example, assume that TITLE is a field section defined with visible flag set to FALSE. Then the query dog without the WITHIN operator will not find a document containing:

<TITLE>The dog</TITLE> I like my pet.

To find such a document, you can use the WITHIN operator as follows:

'dog WITHIN TITLE'

Alternatively, you can set the visible flag to TRUE when you define TITLE as a field section with CTX_DDL.ADD_FIELD_SECTION.

Repeated Field Sections

WITHIN queries cannot distinguish repeated field sections in a document. For example, consider the document with the repeated section <author>:

<author> Charles Dickens </author>
<author> Martin Luther King </author>

Assuming that <author> is defined as a field section, a query such as (charles and martin) within author returns the document, even though these words occur in separate tags.

To have WITHIN queries distinguish repeated sections, define the sections as zone sections.

Nested Field Sections

You cannot issue a nested WITHIN query with field sections. Doing so raises an error.

Querying Within Sentence or Paragraphs

Querying within sentence or paragraph boundaries is useful to find combinations of words that occur in the same sentence or paragraph. To query sentence or paragraphs, you must first add the special section to your section group before you index. You do so with CTX_DDL.ADD_SPECIAL_SECTION.

To find documents that contain dog and cat within the same sentence:

'(dog and cat) WITHIN SENTENCE'

To find documents that contain dog and cat within the same paragraph:

'(dog and cat) WITHIN PARAGRAPH'

To find documents that contain sentences with the word dog but not cat:

'(dog not cat) WITHIN SENTENCE'

Querying Within Attribute Sections

You can query within attribute sections when you index with either XML_SECTION_GROUP or AUTO_SECTION_GROUP as your section group type.

Assume you have an XML document as follows:

<book title="Tale of Two Cities">It was the best of times.</book>

You can define the section title@book to be the attribute section title. You can do so with the CTX_DLL.ADD_ATTR_SECTION procedure or dynamically after indexing with ALTER INDEX.

To search on Tale within the attribute section title, you issue the following query:

'Tale WITHIN title'

Constraints for Querying Attribute Sections

The following constraints apply to querying within attribute sections:

• Regular queries on attribute text do not hit the document unless qualified in a within clause. Assume you have an XML document as follows:

<book title="Tale of Two Cities">It was the best of times.</book>

A query on Tale by itself does not produce a hit on the document unless qualified with WITHIN title@book. (This behavior is like field sections when you set the visible flag set to false.)

• You cannot use attribute sections in a nested WITHIN query.

• Phrases ignore attribute text. For example, if the original document looked like:

Now is the time for all good <word type="noun"> men </word> to come to the aid.

Then this document would hit on the regular query good men, ignoring the intervening attribute text.

• WITHIN queries can distinguish repeated attribute sections. This behavior is like zone sections but unlike field sections. For example, you have a document as follows:

<book title="Tale of Two Cities">It was the best of times.</book>
<book title="Of Human Bondage">The sky broke dull and gray.</book>

Assume that book is a zone section and book@author is an attribute section. Consider the query:

'(Tale and Bondage) WITHIN book@author'

This query does not hit the document, because tale and bondage are in different occurrences of the attribute section book@author.

Notes

Section Names

The WITHIN operator requires you to know the name of the section you search. A list of defined sections can be obtained using the CTX_SECTIONS or CTX_USER_SECTIONS views.

Section Boundaries

For special and zone sections, the terms of the query must be fully enclosed in a particular occurrence of the section for the document to satisfy the query. This is not a requirement for field sections.

For example, consider the query where bold is a zone section:

'(dog and cat) WITHIN bold'

This query finds:

<B>dog cat</B>

but it does not find:

<B>dog</B><B>cat</B>

This is because dog and cat must be in the same bold section.

This behavior is especially useful for special sections, where

'(dog and cat) WITHIN sentence'

means find dog and cat within the same sentence.

Field sections on the other hand are meant for non-repeating, embedded metadata such as a title section. Queries within field sections cannot distinguish between occurrences. All occurrences of a field section are considered to be parts of a single section. For example, the query:

(dog and cat) WITHIN title

can find a document like this:

<TITLE>dog</TITLE><TITLE>cat</TITLE>

In return for this field section limitation and for the overlap and nesting limitations, field section queries are generally faster than zone section queries, especially if the section occurs in every document, or if the search term is common.