V$DATABASE

V$DATABASE displays information about the database from the control file.

Column	Datatype	Description
`DBID`	`NUMBER`	Database identifier calculated when the database is created and stored in all file headers
`NAME`	`VARCHAR2(9)`	Name of the database
`CREATED`	`DATE`	Creation date of the database
`RESETLOGS_CHANGE#`	`NUMBER`	System change number (SCN) at open resetlogs
`RESETLOGS_TIME`	`DATE`	Timestamp of open resetlogs
`PRIOR_RESETLOGS_CHANGE#`	`NUMBER`	SCN at prior resetlogs
`PRIOR_RESETLOGS_TIME`	`DATE`	Timestamp of prior resetlogs
`LOG_MODE`	`VARCHAR2(12)`	Archive log mode: `NOARCHIVELOG` `ARCHIVELOG` `MANUAL`
`CHECKPOINT_CHANGE#`	`NUMBER`	Last SCN checkpointed
`ARCHIVE_CHANGE#`	`NUMBER`	Database force archiving SCN. Any redo log with a start SCN below this will be forced to archive out.
`CONTROLFILE_TYPE`	`VARCHAR2(7)`	Type of control file: `STANDBY` - Indicates that the database is in standby mode `CLONE` - Indicates a clone database `BACKUP` \| `CREATED` - Indicates the database is being recovered using a backup or created control file `CURRENT` - database is available for general use
`CONTROLFILE_CREATED`	`DATE`	Creation date of the control file
`CONTROLFILE_SEQUENCE#`	`NUMBER`	Control file sequence number incremented by control file transactions
`CONTROLFILE_CHANGE#`	`NUMBER`	Last SCN in backup control file; null if the control file is not a backup
`CONTROLFILE_TIME`	`DATE`	Last timestamp in backup control file; null if the control file is not a backup
`OPEN_RESETLOGS`	`VARCHAR2(11)`	(`NOT ALLOWED` \| `ALLOWED` \| `REQUIRED`) Indicates whether the next database open allows or requires the resetlogs option
`VERSION_TIME`	`DATE`	Version time
`OPEN_MODE`	`VARCHAR2(10)`	Open mode information: `MOUNTED` `READ WRITE` `READ ONLY`
`PROTECTION_MODE`	`VARCHAR2(20)`	Protection mode currently in effect for the database: `MAXIMUM PROTECTION` - Database is running in maximized protection mode `MAXIMUM AVAILABILITY` - Database is running in maximized availability mode `RESYNCHRONIZATION` - Database is running in resynchronization mode `MAXIMUM PERFORMANCE` - Database is running in maximized protection mode `UNPROTECTED` - Database is unprotected (this normally occurs when the primary database is mounted and not open)
`PROTECTION_LEVEL`	`VARCHAR2(20)`	Aggregated protection mode currently in effect for the database: `MAXIMUM PROTECTION` - Database is running in maximized protection mode `MAXIMUM AVAILABILITY` - Database is running in maximized availability mode `RESYNCHRONIZATION` - Database is running in resynchronization mode `MAXIMUM PERFORMANCE` - Database is running in maximized protection mode `UNPROTECTED` - Database is unprotected (this normally occurs when the primary database is mounted and not open) Note:This column is an aggregation of the `PROTECTION_MODE` of all standby archive log destinations.
`REMOTE_ARCHIVE`	`VARCHAR2(8)`	Value of the `REMOTE_ARCHIVE_ENABLE` initialization parameter
`ACTIVATION#`	`NUMBER`	Number assigned to the database instantiation
`SWITCHOVER#`	`NUMBER`	Number assigned to the database switchover
`DATABASE_ROLE`	`VARCHAR2(16)`	Current role of the database: `LOGICAL STANDBY` `PHYSICAL STANDBY` `PRIMARY`
`ARCHIVELOG_CHANGE#`	`NUMBER`	Highest `NEXT_CHANGE#` (from the `V$ARCHIVED_LOG` view) for an archive log
`SWITCHOVER_STATUS`	`VARCHAR2(20)`	Indicates whether switchover is allowed: `NOT ALLOWED` - Either this is a standby database and the primary database has not been switched first or this is a primary database and there are no standby databases. `SESSIONS ACTIVE` - Indicates that there are active SQL sessions attached to the primary or standby database that need to be disconnected before the switchover operation is permitted. Query the `V$SESSION` view to identify the specific processes that need to be terminated. `SWITCHOVER PENDING` - This is a standby database and the primary database switchover request has been received but not processed. `SWITCHOVER LATENT` - The switchover was in pending mode, but did not complete and went back to the primary database. `TO PRIMARY` - This is a standby database and is allowed to switch over to a primary database. `TO STANDBY` - This is a primary database and is allowed to switch over to a standby database. `RECOVERY NEEDED` - This is a standby database that has not received the switchover request. `PREPARING SWITCHOVER` - Either this is a primary database that is accepting redo data from a logical standby database in preparation for switch over to the logical standby database role, or it is a logical standby database sending redo data to a primary database and other standby databases in preparation for switch over to the primary database role. In the latter case, a completed dictionary has already been sent to the primary database and other standby databases. `PREPARING DICTIONARY` - This is a logical standby database that is sending redo data to a primary database and other standby databases in the configuration in preparation for switch over to the primary database role. `TO LOGICAL STANDBY` - This is a primary database that has received a complete dictionary from a logical standby database.
`DATAGUARD_BROKER`	`VARCHAR2(8)`	Indicates whether the Data Guard configuration is being managed by the broker (`ENABLED`) or not (`DISABLED`)
`GUARD_STATUS`	`VARCHAR2(7)`	Protects data from being changed: `ALL` - Indicates all users other than `SYS` are prevented from making changes to any data in the database. `STANDBY` - Indicates all users other than `SYS` are prevented from making changes to any database object being maintained by logical standby. `NONE` - Indicates normal security for all data in the database.
`SUPPLEMENTAL_LOG_DATA_MIN`	`VARCHAR2(8)`	Ensures that LogMiner (and any products building on LogMiner technology) will have sufficient information to support chained rows and various storage arrangements such as cluster tables: `NO` - None of the database-wide supplemental logging directives are enabled `IMPLICIT` - Minimal supplemental logging is enabled because all or a combination of primary key, unique key, and foreign key supplemental logging is enabled `YES` - Minimal supplemental logging is enabled through an `ALTER DATABASE ADD SUPPLEMENTAL LOG DATA` statement See Also: Oracle Database SQL Reference for additional information about the `ALTER DATABASE ADD SUPPLEMENTAL LOG DATA` statement
`SUPPLEMENTAL_LOG_DATA_PK`	`VARCHAR2(3)`	For all tables with a primary key, indicates whether all columns of the primary key are placed into the redo log whenever an update is performed (`YES`) or not (`NO`) See Also: Oracle Database SQL Reference for more information about the `ALTER DATABASE ADD SUPPLEMENTAL LOG` `supplemental_id_key_clause` statement
`SUPPLEMENTAL_LOG_DATA_UI`	`VARCHAR2(3)`	For all tables with a unique key, indicates whether all other columns belonging to the unique key are placed into the redo log if any of the unique key columns are modified (`YES`) or not (`NO`) See Also: Oracle Database SQL Reference for more information about the `ALTER DATABASE ADD SUPPLEMENTAL LOG` `supplemental_id_key_clause` statement
`FORCE_LOGGING`	`VARCHAR2(3)`	Indicates whether the database is under force logging mode (`YES`) or not (`NO`)
`PLATFORM_ID`	`NUMBER`	Platform identification number of the database
`PLATFORM_NAME`	`VARCHAR2(101)`	Platform name of the database
`RECOVERY_TARGET_INCARNATION#`	`NUMBER`	Incarnation number where all datafiles are recovered by the `RECOVER DATABASE` command
`LAST_OPEN_INCARNATION#`	`NUMBER`	Record number of the incarnation in `V$DATABASE_INCARNATION` that was last opened successfully
`CURRENT_SCN`	`NUMBER`	Current SCN; null if the database is not currently open. For a standby database, the current standby redo application SCN.
`FLASHBACK_ON`	`VARCHAR2(3)`	Indicates whether the database is in `FLASHBACK` mode (`YES`) or not (`NO`)
`SUPPLEMENTAL_LOG_DATA_FK`	`VARCHAR2(3)`	For all tables with a foreign key, indicates whether all other columns belonging to the foreign key are placed into the redo log if any foreign key columns are modified (`YES`) or not (`NO`) See Also: Oracle Database SQL Reference for more information about the `ALTER DATABASE ADD SUPPLEMENTAL LOG` `supplemental_id_key_clause` statement
`SUPPLEMENTAL_LOG_DATA_ALL`	`VARCHAR2(3)`	For all columns, indicates whether all the fixed-length maximum size columns of that row are placed into the redo log (`YES`) or not (`NO`) See Also: Oracle Database SQL Reference for more information about the `ALTER DATABASE ADD SUPPLEMENTAL LOG` `supplemental_id_key_clause` statement
`DB_UNIQUE_NAME`	`VARCHAR2(30)`	Unique database name
`STANDBY_BECAME_PRIMARY_SCN`	`NUMBER`	SCN at which a physical standby database became a primary database. This SCN is useful for converting a failed primary database into a physical standby database after a forced failover. See Also: Oracle Data Guard Concepts and Administration.