16 Managing Partitioned Tables and Indexes

When to Use Range Partitioning

Use range partitioning to map rows to partitions based on ranges of column values. This type of partitioning is useful when dealing with data that has logical ranges into which it can be distributed; for example, months of the year. Performance is best when the data evenly distributes across the range. If partitioning by range causes partitions to vary dramatically in size because of unequal distribution, you may want to consider one of the other methods of partitioning.

When creating range partitions, you must specify:

• Partitioning method: range

• Partitioning column(s)

• Partition descriptions identifying partition bounds

The example below creates a table of four partitions, one for each quarter of sales. The columns sale_year, sale_month, and sale_day are the partitioning columns, while their values constitute the partitioning key of a specific row. The VALUES LESS THAN clause determines the partition bound: rows with partitioning key values that compare less than the ordered list of values specified by the clause are stored in the partition. Each partition is given a name (sales_q1, sales_q2, ...), and each partition is contained in a separate tablespace (tsa, tsb, ...).

CREATE TABLE sales
    ( invoice_no NUMBER, 
      sale_year  INT NOT NULL,
      sale_month INT NOT NULL,
      sale_day   INT NOT NULL )
  PARTITION BY RANGE (sale_year, sale_month, sale_day)
    ( PARTITION sales_q1 VALUES LESS THAN (1999, 04, 01) 
        TABLESPACE tsa,
      PARTITION sales_q2 VALUES LESS THAN (1999, 07, 01) 
        TABLESPACE tsb,
      PARTITION sales_q3 VALUES LESS THAN (1999, 10, 01) 
        TABLESPACE tsc,
      PARTITION sales_q4 VALUES LESS THAN (2000, 01, 01) 
        TABLESPACE tsd ); 

A row with sale_year=1999, sale_month=8, and sale_day=1 has a partitioning key of (1999, 8, 1) and would be stored in partition sales_q3.

When to Use Hash Partitioning

Use hash partitioning if your data does not easily lend itself to range partitioning, but you would like to partition for performance and manageability reasons. Hash partitioning provides a method of evenly distributing data across a specified number of partitions. Rows are mapped into partitions based on a hash value of the partitioning key. Creating and using hash partitions gives you a highly tunable method of data placement, because you can influence availability and performance by spreading these evenly sized partitions across I/O devices (striping).

To create hash partitions you specify the following:

• Partitioning method: hash

• Partitioning column(s)

• Number of partitions or individual partition descriptions

The following example creates a hash-partitioned table. The partitioning column is id, four partitions are created and assigned system generated names, and they are placed in four named tablespaces (gear1, gear2, ...).

CREATE TABLE scubagear
     (id NUMBER,
      name VARCHAR2 (60))
   PARTITION BY HASH (id)
   PARTITIONS 4 
   STORE IN (gear1, gear2, gear3, gear4);

When to Use List Partitioning

Use list partitioning when you require explicit control over how rows map to partitions. You can specify a list of discrete values for the partitioning column in the description for each partition. This is different from range partitioning, where a range of values is associated with a partition, and from hash partitioning, where the user has no control of the row to partition mapping.

The list partitioning method is specifically designed for modeling data distributions that follow discrete values. This cannot be easily done by range or hash partitioning because:

• Range partitioning assumes a natural range of values for the partitioning column. It is not possible to group together out-of-range values partitions.

• Hash partitioning allows no control over the distribution of data because the data is distributed over the various partitions using the system hash function. Again, this makes it impossible to logically group together discrete values for the partitioning columns into partitions.

Further, list partitioning allows unordered and unrelated sets of data to be grouped and organized together very naturally.

Unlike the range and hash partitioning methods, multicolumn partitioning is not supported for list partitioning. If a table is partitioned by list, the partitioning key can consist only of a single column of the table. Otherwise all columns that can be partitioned by the range or hash methods can be partitioned by the list partitioning method.

When creating list partitions, you must specify:

• Partitioning method: list

• Partitioning column

• Partition descriptions, each specifying a list of literal values (a value list), which are the discrete values of the partitioning column that qualify a row to be included in the partition

The following example creates a list-partitioned table. It creates table q1_sales_by_region which is partitioned by regions consisting of groups of states.

CREATE TABLE q1_sales_by_region
      (deptno number, 
       deptname varchar2(20),
       quarterly_sales number(10, 2),
       state varchar2(2))
   PARTITION BY LIST (state)
      (PARTITION q1_northwest VALUES ('OR', 'WA'),
       PARTITION q1_southwest VALUES ('AZ', 'UT', 'NM'),
       PARTITION q1_northeast VALUES  ('NY', 'VM', 'NJ'),
       PARTITION q1_southeast VALUES ('FL', 'GA'),
       PARTITION q1_northcentral VALUES ('SD', 'WI'),
       PARTITION q1_southcentral VALUES ('OK', 'TX'));

A row is mapped to a partition by checking whether the value of the partitioning column for a row matches a value in the value list that describes the partition.

For example, some sample rows are inserted as follows:

• (10, 'accounting', 100, 'WA') maps to partition q1_northwest

• (20, 'R&D', 150, 'OR') maps to partition q1_northwest

• (30, 'sales', 100, 'FL') maps to partition q1_southeast

• (40, 'HR', 10, 'TX') maps to partition q1_southwest

• (50, 'systems engineering', 10, 'CA') does not map to any partition in the table and raises an error

Unlike range partitioning, with list partitioning, there is no apparent sense of order between partitions. You can also specify a default partition into which rows that do not map to any other partition are mapped. If a default partition were specified in the preceding example, the state CA would map to that partition.

When to Use Composite Range-Hash Partitioning

Range-hash partitioning partitions data using the range method, and within each partition, subpartitions it using the hash method. These composite partitions are ideal for both historical data and striping, and provide improved manageability of range partitioning and data placement, as well as the parallelism advantages of hash partitioning.

When creating range-hash partitions, you specify the following:

• Partitioning method: range

• Partitioning column(s)

• Partition descriptions identifying partition bounds

• Subpartitioning method: hash

• Subpartitioning column(s)

• Number of subpartitions for each partition or descriptions of subpartitions

The following statement creates a range-hash partitioned table. In this example, three range partitions are created, each containing eight subpartitions. Because the subpartitions are not named, system generated names are assigned, but the STORE IN clause distributes them across the 4 specified tablespaces (ts1, ...,ts4).

CREATE TABLE scubagear (equipno NUMBER, equipname VARCHAR(32), price NUMBER)
  PARTITION BY RANGE (equipno) SUBPARTITION BY HASH(equipname)
    SUBPARTITIONS 8 STORE IN (ts1, ts2, ts3, ts4)
      (PARTITION p1 VALUES LESS THAN (1000),
       PARTITION p2 VALUES LESS THAN (2000),
       PARTITION p3 VALUES LESS THAN (MAXVALUE));

The partitions of a range-hash partitioned table are logical structures only, as their data is stored in the segments of their subpartitions. As with partitions, these subpartitions share the same logical attributes. Unlike range partitions in a range-partitioned table, the subpartitions cannot have different physical attributes from the owning partition, although they are not required to reside in the same tablespace.

When to Use Composite Range-List Partitioning

Like the composite range-hash partitioning method, the composite range-list partitioning method provides for partitioning based on a two level hierarchy. The first level of partitioning is based on a range of values, as for range partitioning; the second level is based on discrete values, as for list partitioning. This form of composite partitioning is well suited for historical data, but lets you further group the rows of data based on unordered or unrelated column values.

When creating range-list partitions, you specify the following:

• Partitioning method: range

• Partitioning column(s)

• Partition descriptions identifying partition bounds

• Subpartitioning method: list

• Subpartitioning column

• Subpartition descriptions, each specifying a list of literal values (a value list), which are the discrete values of the subpartitioning column that qualify a row to be included in the subpartition

The following example illustrates how range-list partitioning might be used. The example tracks sales data of products by quarters and within each quarter, groups it by specified states.

CREATE TABLE quarterly_regional_sales
      (deptno number, item_no varchar2(20),
       txn_date date, txn_amount number, state varchar2(2))
  TABLESPACE ts4
  PARTITION BY RANGE (txn_date)
    SUBPARTITION BY LIST (state)
      (PARTITION q1_1999 VALUES LESS THAN (TO_DATE('1-APR-1999','DD-MON-YYYY'))
         (SUBPARTITION q1_1999_northwest VALUES ('OR', 'WA'),
          SUBPARTITION q1_1999_southwest VALUES ('AZ', 'UT', 'NM'),
          SUBPARTITION q1_1999_northeast VALUES ('NY', 'VM', 'NJ'),
          SUBPARTITION q1_1999_southeast VALUES ('FL', 'GA'),
          SUBPARTITION q1_1999_northcentral VALUES ('SD', 'WI'),
          SUBPARTITION q1_1999_southcentral VALUES ('OK', 'TX')
         ),
       PARTITION q2_1999 VALUES LESS THAN ( TO_DATE('1-JUL-1999','DD-MON-YYYY'))
         (SUBPARTITION q2_1999_northwest VALUES ('OR', 'WA'),
          SUBPARTITION q2_1999_southwest VALUES ('AZ', 'UT', 'NM'),
          SUBPARTITION q2_1999_northeast VALUES ('NY', 'VM', 'NJ'),
          SUBPARTITION q2_1999_southeast VALUES ('FL', 'GA'),
          SUBPARTITION q2_1999_northcentral VALUES ('SD', 'WI'),
          SUBPARTITION q2_1999_southcentral VALUES ('OK', 'TX')
         ),
       PARTITION q3_1999 VALUES LESS THAN (TO_DATE('1-OCT-1999','DD-MON-YYYY'))
         (SUBPARTITION q3_1999_northwest VALUES ('OR', 'WA'),
          SUBPARTITION q3_1999_southwest VALUES ('AZ', 'UT', 'NM'),
          SUBPARTITION q3_1999_northeast VALUES ('NY', 'VM', 'NJ'),
          SUBPARTITION q3_1999_southeast VALUES ('FL', 'GA'),
          SUBPARTITION q3_1999_northcentral VALUES ('SD', 'WI'),
          SUBPARTITION q3_1999_southcentral VALUES ('OK', 'TX')
         ),
       PARTITION q4_1999 VALUES LESS THAN ( TO_DATE('1-JAN-2000','DD-MON-YYYY'))
         (SUBPARTITION q4_1999_northwest VALUES ('OR', 'WA'),
          SUBPARTITION q4_1999_southwest VALUES ('AZ', 'UT', 'NM'),
          SUBPARTITION q4_1999_northeast VALUES ('NY', 'VM', 'NJ'),
          SUBPARTITION q4_1999_southeast VALUES ('FL', 'GA'),
          SUBPARTITION q4_1999_northcentral VALUES ('SD', 'WI'),
          SUBPARTITION q4_1999_southcentral VALUES ('OK', 'TX')
         )
      );

A row is mapped to a partition by checking whether the value of the partitioning column for a row falls within a specific partition range. The row is then mapped to a subpartition within that partition by identifying the subpartition whose descriptor value list contains a value matching the subpartition column value.

For example, some sample rows are inserted as follows:

• (10, 4532130, '23-Jan-1999', 8934.10, 'WA') maps to subpartition q1_1999_northwest

• (20, 5671621, '15-May-1999', 49021.21, 'OR') maps to subpartition q2_1999_northwest

• (30, 9977612, ,'07-Sep-1999', 30987.90, 'FL') maps to subpartition q3_1999_southeast

• (40, 9977612, '29-Nov-1999', 67891.45, 'TX') maps to subpartition q4_1999_southcentral

• (40, 4532130, '5-Jan-2000', 897231.55, 'TX') does not map to any partition in the table and raises an error

• (50, 5671621, '17-Dec-1999', 76123.35, 'CA') does not map to any subpartition in the table and raises an error

The partitions of a range-list partitioned table are logical structures only, as their data is stored in the segments of their subpartitions. The list subpartitions have the same characteristics as list partitions. You can specify a default subpartition, just as you specify a default partition for list partitioning.

Creating Range-Partitioned Tables and Global Indexes

The PARTITION BY RANGE clause of the CREATE TABLE statement specifies that the table or index is to be range-partitioned. The PARTITION clauses identify the individual partition ranges, and optional subclauses of a PARTITION clause can specify physical and other attributes specific to a partition segment. If not overridden at the partition level, partitions inherit the attributes of their underlying table.

CREATE TABLE sales 
     ( invoice_no NUMBER,
       sale_year  INT NOT NULL,
       sale_month INT NOT NULL,
       sale_day   INT NOT NULL )
   STORAGE (INITIAL 100K NEXT 50K) LOGGING 
   PARTITION BY RANGE ( sale_year, sale_month, sale_day)
     ( PARTITION sales_q1 VALUES LESS THAN ( 1999, 04, 01 )
        TABLESPACE tsa STORAGE (INITIAL 20K, NEXT 10K),
       PARTITION sales_q2 VALUES LESS THAN ( 1999, 07, 01 )
        TABLESPACE tsb,
       PARTITION sales_q3 VALUES LESS THAN ( 1999, 10, 01 )
        TABLESPACE tsc,
       PARTITION sales q4 VALUES LESS THAN ( 2000, 01, 01 )
        TABLESPACE tsd)
   ENABLE ROW MOVEMENT;

CREATE INDEX month_ix ON sales(sales_month)
   GLOBAL PARTITION BY RANGE(sales_month)
      (PARTITION pm1_ix VALUES LESS THAN (2)
       PARTITION pm2_ix VALUES LESS THAN (3)
       PARTITION pm3_ix VALUES LESS THAN (4)
       PARTITION pm4_ix VALUES LESS THAN (5)
       PARTITION pm5_ix VALUES LESS THAN (6)
       PARTITION pm6_ix VALUES LESS THAN (7)
       PARTITION pm7_ix VALUES LESS THAN (8)
       PARTITION pm8_ix VALUES LESS THAN (9)
       PARTITION pm9_ix VALUES LESS THAN (10)
       PARTITION pm10_ix VALUES LESS THAN (11)
       PARTITION pm11_ix VALUES LESS THAN (12)
       PARTITION pm12_ix VALUES LESS THAN (MAXVALUE));

Creating Hash-Partitioned Tables and Global Indexes

The PARTITION BY HASH clause of the CREATE TABLE statement identifies that the table is to be hash-partitioned. The PARTITIONS clause can then be used to specify the number of partitions to create, and optionally, the tablespaces to store them in. Alternatively, you can use PARTITION clauses to name the individual partitions and their tablespaces.

The only attribute you can specify for hash partitions is TABLESPACE. All of the hash partitions of a table must share the same segment attributes (except TABLESPACE), which are inherited from the table level.

CREATE TABLE dept (deptno NUMBER, deptname VARCHAR(32))
     PARTITION BY HASH(deptno) PARTITIONS 16;

CREATE TABLE dept (deptno NUMBER, deptname VARCHAR(32))
     STORAGE (INITIAL 10K)
     PARTITION BY HASH(deptno)
       (PARTITION p1 TABLESPACE ts1, PARTITION p2 TABLESPACE ts2,
        PARTITION p3 TABLESPACE ts1, PARTITION p4 TABLESPACE ts3);

CREATE INDEX loc_dept_ix ON dept(deptno) LOCAL;

CREATE INDEX hgidx ON tab (c1,c2,c3) GLOBAL
     PARTITION BY HASH (c1,c2)
     (PARTITION p1  TABLESPACE tbs_1,
      PARTITION p2  TABLESPACE tbs_2,
      PARTITION p3  TABLESPACE tbs_3,
      PARTITION p4  TABLESPACE tbs_4);

Creating List-Partitioned Tables

The semantics for creating list partitions are very similar to those for creating range partitions. However, to create list partitions, you specify a PARTITION BY LIST clause in the CREATE TABLE statement, and the PARTITION clauses specify lists of literal values, which are the discrete values of the partitioning columns that qualify rows to be included in the partition. For list partitioning, the partitioning key can only be a single column name from the table.

Available only with list partitioning, you can use the keyword DEFAULT to describe the value list for a partition. This identifies a partition that will accommodate rows that do not map into any of the other partitions.

As for range partitions, optional subclauses of a PARTITION clause can specify physical and other attributes specific to a partition segment. If not overridden at the partition level, partitions inherit the attributes of their parent table.

The following example creates table sales_by_region and partitions it using the list method. The first two PARTITION clauses specify physical attributes, which override the table-level defaults. The remaining PARTITION clauses do not specify attributes and those partitions inherit their physical attributes from table-level defaults. A default partition is specified.

CREATE TABLE sales_by_region (item# INTEGER, qty INTEGER, 
             store_name VARCHAR(30), state_code VARCHAR(2),
             sale_date DATE)
     STORAGE(INITIAL 10K NEXT 20K) TABLESPACE tbs5 
     PARTITION BY LIST (state_code) 
     (
     PARTITION region_east
        VALUES ('MA','NY','CT','NH','ME','MD','VA','PA','NJ')
        STORAGE (INITIAL 20K NEXT 40K PCTINCREASE 50) 
        TABLESPACE tbs8,
     PARTITION region_west
        VALUES ('CA','AZ','NM','OR','WA','UT','NV','CO')
        PCTFREE 25 NOLOGGING,
     PARTITION region_south
        VALUES ('TX','KY','TN','LA','MS','AR','AL','GA'),
     PARTITION region_central 
        VALUES ('OH','ND','SD','MO','IL','MI','IA'),
     PARTITION region_null
        VALUES (NULL),
     PARTITION region_unknown
        VALUES (DEFAULT)
     );

Creating Composite Range-Hash Partitioned Tables

To create a range-hash partitioned table, you start by using the PARTITION BY RANGE clause of a CREATE TABLE statement. Next, you specify a SUBPARTITION BY HASH clause that follows similar syntax and rules as the PARTITION BY HASH clause. The individual PARTITION and SUBPARTITION or SUBPARTITIONS clauses, and optionally a SUBPARTITION TEMPLATE clause, follow.

Attributes specified for a range partition apply to all subpartitions of that partition. You can specify different attributes for each range partition, and you can specify a STORE IN clause at the partition level if the list of tablespaces across which the subpartitions of that partition should be spread is different from those of other partitions. All of this is illustrated in the following example.

CREATE TABLE emp (deptno NUMBER, empname VARCHAR(32), grade NUMBER)   
     PARTITION BY RANGE(deptno) SUBPARTITION BY HASH(empname)
        SUBPARTITIONS 8 STORE IN (ts1, ts3, ts5, ts7)
    (PARTITION p1 VALUES LESS THAN (1000) PCTFREE 40,
     PARTITION p2 VALUES LESS THAN (2000)
        STORE IN (ts2, ts4, ts6, ts8),
     PARTITION p3 VALUES LESS THAN (MAXVALUE)
       (SUBPARTITION p3_s1 TABLESPACE ts4,
        SUBPARTITION p3_s2 TABLESPACE ts5));

To learn how using a subpartition template can simplify the specification of a composite partitioned table, see "Using Subpartition Templates to Describe Composite Partitioned Tables".

The following statement is an example of creating a local index on the emp table where the index segments are spread across tablespaces ts7, ts8, and ts9.

CREATE INDEX emp_ix ON emp(deptno)
     LOCAL STORE IN (ts7, ts8, ts9);

This local index is equipartitioned with the base table as follows:

• It consists of as many partitions as the base table.

• Each index partition consists of as many subpartitions as the corresponding base table partition.

• Index entries for rows in a given subpartition of the base table are stored in the corresponding subpartition of the index.

Creating Composite Range-List Partitioned Tables

The concept of range-list partitioning is similar to that of the other composite partitioning method, range-hash, but this time you specify that the subpartitions are to be list rather than hash. Specifically, after the CREATE TABLE ... PARTITION BY RANGE clause, you include a SUBPARTITION BY LIST clause that follows similar syntax and rules as the PARTITION BY LIST clause. The individual PARTITION and SUBPARTITION clauses, and optionally a SUBPARTITION TEMPLATE clause, follow.

The range partitions of the composite partitioned table are described as for noncomposite range partitioned tables. This allows that optional subclauses of a PARTITION clause can specify physical and other attributes, including tablespace, specific to a partition segment. If not overridden at the partition level, partitions inherit the attributes of their underlying table.

The list subpartition descriptions, in the SUBPARTITION clauses, are described as for noncomposite list partitions, except the only physical attribute that can be specified is a tablespace (optional). Subpartitions inherit all other physical attributes from the partition description.

The following example of creates a table that specifies a tablespace at the partition and subpartition levels. The number of subpartitions within each partition varies, and default subpartitions are specified.

CREATE TABLE sample_regional_sales
      (deptno number, item_no varchar2(20),
       txn_date date, txn_amount number, state varchar2(2))
  PARTITION BY RANGE (txn_date)
    SUBPARTITION BY LIST (state)
      (PARTITION q1_1999 VALUES LESS THAN (TO_DATE('1-APR-1999','DD-MON-YYYY'))
          TABLESPACE tbs_1
         (SUBPARTITION q1_1999_northwest VALUES ('OR', 'WA'),
          SUBPARTITION q1_1999_southwest VALUES ('AZ', 'UT', 'NM'),
          SUBPARTITION q1_1999_northeast VALUES ('NY', 'VM', 'NJ'),
          SUBPARTITION q1_1999_southeast VALUES ('FL', 'GA'),
          SUBPARTITION q1_others VALUES (DEFAULT) TABLESPACE tbs_4
         ),
       PARTITION q2_1999 VALUES LESS THAN ( TO_DATE('1-JUL-1999','DD-MON-YYYY'))
          TABLESPACE tbs_2
         (SUBPARTITION q2_1999_northwest VALUES ('OR', 'WA'),
          SUBPARTITION q2_1999_southwest VALUES ('AZ', 'UT', 'NM'),
          SUBPARTITION q2_1999_northeast VALUES ('NY', 'VM', 'NJ'),
          SUBPARTITION q2_1999_southeast VALUES ('FL', 'GA'),
          SUBPARTITION q2_1999_northcentral VALUES ('SD', 'WI'),
          SUBPARTITION q2_1999_southcentral VALUES ('OK', 'TX')
         ),
       PARTITION q3_1999 VALUES LESS THAN (TO_DATE('1-OCT-1999','DD-MON-YYYY'))
          TABLESPACE tbs_3
         (SUBPARTITION q3_1999_northwest VALUES ('OR', 'WA'),
          SUBPARTITION q3_1999_southwest VALUES ('AZ', 'UT', 'NM'),
          SUBPARTITION q3_others VALUES (DEFAULT) TABLESPACE tbs_4
         ),
       PARTITION q4_1999 VALUES LESS THAN ( TO_DATE('1-JAN-2000','DD-MON-YYYY'))
          TABLESPACE tbs_4
      );

This example results in the following subpartition descriptions:

• All subpartitions inherit their physical attributes, other than tablespace, from tablespace level defaults. This is because the only physical attribute that has been specified for partitions or subpartitions is tablespace. There are no table level physical attributes specified, thus tablespace level defaults are inherited at all levels.

• The first 4 subpartitions of partition q1_1999 are all contained in tbs_1, except for the subpartition q1_others, which is stored in tbs_4 and contains all rows that do not map to any of the other partitions.

• The 6 subpartitions of partition q2_1999 are all stored in tbs_2.

• The first 2 subpartitions of partition q3_1999 are all contained in tbs_3, except for the subpartition q3_others, which is stored in tbs_4 and contains all rows that do not map to any of the other partitions.

• There is no subpartition description for partition q4_1999. This results in one default subpartition being created and stored in tbs_4. The subpartition name is system generated in the form SYS_SUBPn.

To learn how using a subpartition template can simplify the specification of a composite partitioned table, see "Using Subpartition Templates to Describe Composite Partitioned Tables".

Using Subpartition Templates to Describe Composite Partitioned Tables

You can create subpartitions in a composite partitioned table using a subpartition template. A subpartition template simplifies the specification of subpartitions by not requiring that a subpartition descriptor be specified for every partition in the table. Instead, you describe subpartitions only once in a template, then apply that subpartition template to every partition in the table.

The subpartition template is used whenever a subpartition descriptor is not specified for a partition. If a subpartition descriptor is specified, then it is used instead of the subpartition template for that partition. If no subpartition template is specified, and no subpartition descriptor is supplied for a partition, then a single default subpartition is created.

CREATE TABLE emp_sub_template (deptno NUMBER, empname VARCHAR(32), grade NUMBER)   
     PARTITION BY RANGE(deptno) SUBPARTITION BY HASH(empname)
     SUBPARTITION TEMPLATE
         (SUBPARTITION a TABLESPACE ts1,
          SUBPARTITION b TABLESPACE ts2,
          SUBPARTITION c TABLESPACE ts3,
          SUBPARTITION d TABLESPACE ts4
         )
    (PARTITION p1 VALUES LESS THAN (1000),
     PARTITION p2 VALUES LESS THAN (2000),
     PARTITION p3 VALUES LESS THAN (MAXVALUE)
    );

SQL> SELECT TABLESPACE_NAME, PARTITION_NAME, SUBPARTITION_NAME
  2  FROM DBA_TAB_SUBPARTITIONS WHERE TABLE_NAME='EMP_SUB_TEMPLATE'
  3  ORDER BY TABLESPACE_NAME;

TABLESPACE_NAME PARTITION_NAME  SUBPARTITION_NAME
--------------- --------------- ------------------
TS1             P1              P1_A
TS1             P2              P2_A
TS1             P3              P3_A
TS2             P1              P1_B
TS2             P2              P2_B
TS2             P3              P3_B
TS3             P1              P1_C
TS3             P2              P2_C
TS3             P3              P3_C
TS4             P1              P1_D
TS4             P2              P2_D
TS4             P3              P3_D

12 rows selected.

CREATE TABLE stripe_regional_sales
            ( deptno number, item_no varchar2(20),
              txn_date date, txn_amount number, state varchar2(2))
   PARTITION BY RANGE (txn_date)
   SUBPARTITION BY LIST (state)
   SUBPARTITION TEMPLATE 
      (SUBPARTITION northwest VALUES ('OR', 'WA') TABLESPACE tbs_1,
       SUBPARTITION southwest VALUES ('AZ', 'UT', 'NM') TABLESPACE tbs_2,
       SUBPARTITION northeast VALUES ('NY', 'VM', 'NJ') TABLESPACE tbs_3,
       SUBPARTITION southeast VALUES ('FL', 'GA') TABLESPACE tbs_4,
       SUBPARTITION midwest VALUES ('SD', 'WI') TABLESPACE tbs_5,
       SUBPARTITION south VALUES ('AL', 'AK') TABLESPACE tbs_6,
       SUBPARTITION others VALUES (DEFAULT ) TABLESPACE tbs_7
      )
  (PARTITION q1_1999 VALUES LESS THAN ( TO_DATE('01-APR-1999','DD-MON-YYYY')),
   PARTITION q2_1999 VALUES LESS THAN ( TO_DATE('01-JUL-1999','DD-MON-YYYY')),
   PARTITION q3_1999 VALUES LESS THAN ( TO_DATE('01-OCT-1999','DD-MON-YYYY')),
   PARTITION q4_1999 VALUES LESS THAN ( TO_DATE('1-JAN-2000','DD-MON-YYYY'))
  );

Using Multicolumn Partitioning Keys

For range- and hash-partitioned tables, you can specify up to 16 partitioning key columns. Multicolumn partitioning should be used when the partitioning key is composed of several columns and subsequent columns define a higher granularity than the preceding ones. The most common scenario is a decomposed DATE or TIMESTAMP key, consisting of separated columns, for year, month, and day.

In evaluating multicolumn partitioning keys, the database uses the second value only if the first value cannot uniquely identify a single target partition, and uses the third value only if the first and second do not determine the correct partition, and so forth. A value cannot determine the correct partition only when a partition bound exactly matches that value and the same bound is defined for the next partition. The n^th column will therefore be investigated only when all previous (n-1) values of the multicolumn key exactly match the (n-1) bounds of a partition. A second column, for example, will be evaluated only if the first column exactly matches the partition boundary value. If all column values exactly match all of the bound values for a partition, the database will determine that the row does not fit in this partition and will consider the next partition for a match.

In the case of nondeterministic boundary definitions (successive partitions with identical values for at least one column), the partition boundary value becomes an inclusive value, representing a "less than or equal to" boundary. This is in contrast to deterministic boundaries, where the values are always regarded as "less than" boundaries.

The following example illustrates the column evaluation for a multicolumn range-partitioned table, storing the actual DATE information in three separate columns: year, month, and date. The partitioning granularity is a calendar quarter. The partitioned table being evaluated is created as follows:

CREATE TABLE sales_demo (
   year          NUMBER, 
   month         NUMBER,
   day           NUMBER,
   amount_sold   NUMBER) 
PARTITION BY RANGE (year,month) 
  (PARTITION before2001 VALUES LESS THAN (2001,1),
   PARTITION q1_2001    VALUES LESS THAN (2001,4),
   PARTITION q2_2001    VALUES LESS THAN (2001,7),
   PARTITION q3_2001    VALUES LESS THAN (2001,10),
   PARTITION q4_2001    VALUES LESS THAN (2002,1),
   PARTITION future     VALUES LESS THAN (MAXVALUE,0));

REM  12-DEC-2000
INSERT INTO sales_demo VALUES(2000,12,12, 1000);
REM  17-MAR-2001
INSERT INTO sales_demo VALUES(2001,3,17, 2000);
REM  1-NOV-2001
INSERT INTO sales_demo VALUES(2001,11,1, 5000);
REM  1-JAN-2002
INSERT INTO sales_demo VALUES(2002,1,1, 4000);

The year value for 12-DEC-2000 satisfied the first partition, before2001, so no further evaluation is needed:

SELECT * FROM sales_demo PARTITION(before2001);

      YEAR      MONTH        DAY AMOUNT_SOLD
---------- ---------- ---------- -----------
      2000         12         12        1000

The information for 17-MAR-2001 is stored in partition q1_2001. The first partitioning key column, year, does not by itself determine the correct partition, so the second partition key column, month, must be evaluated.

SELECT * FROM sales_demo PARTITION(q1_2001);

      YEAR      MONTH        DAY AMOUNT_SOLD
---------- ---------- ---------- -----------
      2001          3         17        2000

Following the same determination rule as for the previous record, the second column, month, determines partition q4_2001 as correct partition for 1-NOV-2001:

SELECT * FROM sales_demo PARTITION(q4_2001);

      YEAR      MONTH        DAY AMOUNT_SOLD
---------- ---------- ---------- -----------
      2001         11          1        5000

The partition for 01-JAN-2002 is determined by evaluating only the year column, which indicates the future partition:

SELECT * FROM sales_demo PARTITION(future);

      YEAR      MONTH        DAY AMOUNT_SOLD
---------- ---------- ---------- -----------
      2002          1          1        4000

If the database encounters MAXVALUE in one of the partition key columns, all other values of subsequent columns become irrelevant. That is, a definition of partition future in the preceding example, having a bound of (MAXVALUE,0) is equivalent to a bound of (MAXVALUE,100) or a bound of (MAXVALUE,MAXVALUE).

The following example illustrates the use of a multicolumn partitioned approach for table supplier_parts, storing the information about which suppliers deliver which parts. To distribute the data in equal-sized partitions, it is not sufficient to partition the table based on the supplier_id, because some suppliers might provide hundreds of thousands of parts, while others provide only a few specialty parts. Instead, you partition the table on (supplier_id, partnum) to manually enforce equal-sized partitions.

CREATE TABLE supplier_parts (
   supplier_id      NUMBER, 
   partnum          NUMBER,
   price            NUMBER)
PARTITION BY RANGE (supplier_id, partnum)
  (PARTITION p1 VALUES LESS THAN  (10,100),
   PARTITION p2 VALUES LESS THAN (10,200),
   PARTITION p3 VALUES LESS THAN (MAXVALUE,MAXVALUE));

The following three records are inserted into the table:

INSERT INTO supplier_parts VALUES (5,5, 1000);
INSERT INTO supplier_parts VALUES (5,150, 1000);
INSERT INTO supplier_parts VALUES (10,100, 1000);

The first two records are inserted into partition p1, uniquely identified by supplier_id. However, the third record is inserted into partition p2; it matches all range boundary values of partition p1 exactly and the database therefore considers the following partition for a match. The value of partnum satisfies the criteria < 200, so it is inserted into partition p2.

SELECT * FROM supplier_parts PARTITION (p1);

SUPPLIER_ID    PARTNUM      PRICE
----------- ---------- ----------
          5          5       1000
          5        150       1000

SELECT * FROM supplier_parts PARTITION (p2);

SUPPLIER_ID    PARTNUM      PRICE
----------- ---------- ----------
          10       100       1000

Every row with supplier_id < 10 will be stored in partition p1, regardless of the partnum value. The column partnum will be evaluated only if supplier_id =10, and the corresponding rows will be inserted into partition p1, p2, or even into p3 when partnum >=200. To achieve equal-sized partitions for ranges of supplier_parts, you could choose a composite range-hash partitioned table, range partitioned by supplier_id, hash subpartitioned by partnum.

Defining the partition boundaries for multicolumn partitioned tables must obey some rules. For example, consider a table that is range partitioned on three columns a, b, and c. The individual partitions have range values represented as follows:

P0(a0, b0, c0)
P1(a1, b1, c1)
P2(a2, b2, c2)
…
Pn(an, bn, cn)

The range values you provide for each partition must follow these rules:

• a0 must be less than or equal to a1, and a1 must be less than or equal to a2, and so on.

• If a0=a1, then b0 must be less than or equal to b1. If a0 < a1, then b0 and b1 can have any values. If b0=b1, then c0 must be less than or equal to c1. If b0<b1, then c0 and c1 can have any values, and so on.

• If a1=a2, then b1 must be less than or equal to b2. If a1<a2, then b1 and b2 can have any values. If b1=b2, then c1 must be less than or equal to c2. If b1<b2, then c0 and c1 can have any values, and so on.

Using Table Compression with Partitioned Tables

For heap-organized partitioned tables, you can compress some or all partitions using table compression. The compression attribute can be declared for a tablespace, a table, or a partition of a table. Whenever the compress attribute is not specified, it is inherited like any other storage attribute.

The following example creates a list-partitioned table with one compressed partition costs_old. The compression attribute for the table and all other partitions is inherited from the tablespace level.

CREATE TABLE costs_demo (
   prod_id     NUMBER(6),    time_id     DATE, 
   unit_cost   NUMBER(10,2), unit_price  NUMBER(10,2))
PARTITION BY RANGE (time_id)
   (PARTITION costs_old 
       VALUES LESS THAN (TO_DATE('01-JAN-2003', 'DD-MON-YYYY')) COMPRESS,
    PARTITION costs_q1_2003 
       VALUES LESS THAN (TO_DATE('01-APR-2003', 'DD-MON-YYYY')),
    PARTITION costs_q2_2003
       VALUES LESS THAN (TO_DATE('01-JUN-2003', 'DD-MON-YYYY')),
    PARTITION costs_recent VALUES LESS THAN (MAXVALUE));

Using Key Compression with Partitioned Indexes

You can compress some or all partitions of a B-tree index using key compression. Key compression is applicable only to B-tree indexes. Bitmap indexes are stored in a compressed manner by default. Index using key compression eliminates repeated occurrences of key column prefix values, thus saving space and I/O.

The following example crates a local partitioned index with all partitions except the most recent one compressed:

CREATE INDEX i_cost1 ON costs_demo (prod_id) COMPRESS LOCAL
   (PARTITION costs_old, PARTITION costs_q1_2003, 
    PARTITION costs_q2_2003, PARTITION costs_recent NOCOMPRESS);

You cannot specify COMPRESS (or NOCOMPRESS) explicitly for an index subpartition. All index subpartitions of a given partition inherit the key compression setting from the parent partition.

To modify the key compression attribute for all subpartitions of a given partition, you must first issue an ALTER INDEX ... MODIFY PARTITION statement and then rebuild all subpartitions. The MODIFY PARTITION clause will mark all index subpartitions as UNUSABLE.

Creating Partitioned Index-Organized Tables

For index-organized tables, you can use the range, list, or hash partitioning method. The semantics for creating partitioned index-organized tables is similar to that for regular tables with these differences:

• When you create the table you specify the ORGANIZATION INDEX clause, and INCLUDING and OVERFLOW clauses as necessary.

• The PARTITION or PARTITIONS clauses can have OVERFLOW subclauses that allow you to specify attributes of the overflow segments at the partition level.

Specifying an OVERFLOW clause results in the overflow data segments themselves being equipartitioned with the primary key index segments. Thus, for partitioned index-organized tables with overflow, each partition has an index segment and an overflow data segment.

For index-organized tables, the set of partitioning columns must be a subset of the primary key columns. Since rows of an index-organized table are stored in the primary key index for the table, the partitioning criterion has an effect on the availability. By choosing the partition key to be a subset of the primary key, an insert operation only needs to verify uniqueness of the primary key in a single partition, thereby maintaining partition independence.

Support for secondary indexes on index-organized tables is similar to the support for regular tables. Because of the logical nature of the secondary indexes, global indexes on index-organized tables remain usable for certain operations where they would be marked UNUSABLE for regular tables.

CREATE TABLE sales(acct_no NUMBER(5), 
                   acct_name CHAR(30), 
                   amount_of_sale NUMBER(6), 
                   week_no INTEGER,
                   sale_details VARCHAR2(1000),
             PRIMARY KEY (acct_no, acct_name, week_no)) 
     ORGANIZATION INDEX 
             INCLUDING week_no
             OVERFLOW TABLESPACE overflow_here
     PARTITION BY RANGE (week_no)
            (PARTITION VALUES LESS THAN (5) 
                   TABLESPACE ts1,
             PARTITION VALUES LESS THAN (9) 
                   TABLESPACE ts2 OVERFLOW TABLESPACE overflow_ts2,
             ...
             PARTITION VALUES LESS THAN (MAXVALUE) 
                   TABLESPACE ts13);

CREATE TABLE sales(acct_no NUMBER(5), 
                   acct_name CHAR(30), 
                   amount_of_sale NUMBER(6), 
                   week_no INTEGER,
                   sale_details VARCHAR2(1000),
             PRIMARY KEY (acct_no, acct_name, week_no)) 
     ORGANIZATION INDEX 
             INCLUDING week_no
             OVERFLOW TABLESPACE example
     PARTITION BY LIST (week_no)
            (PARTITION VALUES (1, 2, 3, 4) 
                   TABLESPACE example,
             PARTITION VALUES (5, 6, 7, 8) 
                   TABLESPACE example OVERFLOW TABLESPACE example,
             PARTITION VALUES (DEFAULT) 
                   TABLESPACE example);

CREATE TABLE sales(acct_no NUMBER(5), 
                   acct_name CHAR(30), 
                   amount_of_sale NUMBER(6), 
                   week_no INTEGER,
                   sale_details VARCHAR2(1000),
             PRIMARY KEY (acct_no, acct_name, week_no)) 
     ORGANIZATION INDEX 
             INCLUDING week_no
     OVERFLOW
          PARTITION BY HASH (week_no)
             PARTITIONS 16
             STORE IN (ts1, ts2, ts3, ts4)
             OVERFLOW STORE IN (ts3, ts6, ts9);

Partitioning Restrictions for Multiple Block Sizes

Use caution when creating partitioned objects in a database with tablespaces of multiple block size. The storage of partitioned objects in such tablespaces is subject to some restrictions. Specifically, all partitions of the following entities must reside in tablespaces of the same block size:

• Conventional tables

• Indexes

• Primary key index segments of index-organized tables

• Overflow segments of index-organized tables

• LOB columns stored out of line

Therefore:

• For each conventional table, all partitions of that table must be stored in tablespaces with the same block size.

• For each index-organized table, all primary key index partitions must reside in tablespaces of the same block size, and all overflow partitions of that table must reside in tablespaces of the same block size. However, index partitions and overflow partitions can reside in tablespaces of different block size.

• For each index (global or local), each partition of that index must reside in tablespaces of the same block size. However, partitions of different indexes defined on the same object can reside in tablespaces of different block sizes.

• For each LOB column, each partition of that column must be stored in tablespaces of equal block sizes. However, different LOB columns can be stored in tablespaces of different block sizes.

When you create or alter a partitioned table or index, all tablespaces you explicitly specify for the partitions and subpartitions of each entity must be of the same block size. If you do not explicitly specify tablespace storage for an entity, the tablespaces the database uses by default must be of the same block size. Therefore you must be aware of the default tablespaces at each level of the partitioned object.

Updating Indexes Automatically

Before discussing the individual maintenance operations for partitioned tables and indexes, it is important to discuss the effects of the UPDATE INDEXES clause that can be specified in the ALTER TABLE statement.

By default, many table maintenance operations on partitioned tables invalidate (mark UNUSABLE) the corresponding indexes or index partitions. You must then rebuild the entire index or, in the case of a global index, each of its partitions. The database lets you override this default behavior if you specify UPDATE INDEXES in your ALTER TABLE statement for the maintenance operation. Specifying this clause tells the database to update the index at the time it executes the maintenance operation DDL statement. This provides the following benefits:

• The index is updated in conjunction with the base table operation. You are not required to later and independently rebuild the index.

• The index is more highly available, because it does not get marked UNUSABLE. The index remains available even while the partition DDL is executing and it can be used to access unaffected partitions in the table.

• You need not look up the names of all invalid indexes to rebuild them.

Optional clauses for local indexes let you specify physical and storage characteristics for updated local indexes and their partitions.

• You can specify physical attributes, tablespace storage, and logging for each partition of each local index. Alternatively, you can specify only the PARTITION keyword and let the database update the as follows

  • For operations on a single table partition (such as MOVE PARTITION and SPLIT PARTITION), the corresponding index partition inherits the attributes of the affected index partition. The database does not generate names for new index partitions, so any new index partitions resulting from this operation inherit their names from the corresponding new table partition.

  • For MERGE PARTITION operations, the resulting local index partition inherits its name from the resulting table partition and inherits its attributes from the local index.

• For a composite-partitioned index, you can specify tablespace storage for each subpartition.

The following operations support the UPDATE INDEXES clause:

• ADD PARTITION | SUBPARTITION

• COALESCE PARTITION | SUBPARTITION

• DROP PARTITION | SUBPARTITION

• EXCHANGE PARTITION | SUBPARTITION

• MERGE PARTITION | SUBPARTITION

• MOVE PARTITION | SUBPARTITION

• SPLIT PARTITION | SUBPARTITION

• TRUNCATE PARTITION | SUBPARTITION

The SKIP_UNUSABLE_INDEXES, which in earlier releases was a session parameter, is now an initialization parameter with a default value of TRUE. This setting disables error reporting of indexes and index partitions marked UNUSABLE. If you do not want the database to choose an alternative execution plan to avoid the unusable elements, you should set this parameter to FALSE.

The following performance implications are worth noting when you specify UPDATE INDEXES:

• The partition DDL statement takes longer to execute, because indexes that were previously marked UNUSABLE are updated. However, you must compare this increase with the time it takes to execute DDL without updating indexes, and then rebuild all indexes. A rule of thumb is that it is faster to update indexes if the size of the partition is less that 5% of the size of the table.

• The DROP, TRUNCATE, and EXCHANGE operations are no longer fast operations. Again, you must compare the time it takes to do the DDL and then rebuild all indexes.

• When you update a table with a global index:

  • The index is updated in place. The updates to the index are logged, and redo and undo records are generated. In contrast, if you rebuild an entire global index, you can do so in NOLOGGING mode.

  • Rebuilding the entire index manually creates a more efficient index, because it is more compact with space better utilized.

Adding Partitions

This section describes how to add new partitions to a partitioned table and explains why partitions cannot be specifically added to most partitioned indexes.

ALTER TABLE sales 
      ADD PARTITION jan96 VALUES LESS THAN ( '01-FEB-1999' )
      TABLESPACE tsx;

ALTER TABLE scubagear ADD PARTITION;

ALTER TABLE scubagear
      ADD PARTITION p_named TABLESPACE gear5;

ALTER TABLE q1_sales_by_region 
   ADD PARTITION q1_nonmainland VALUES ('HI', 'PR')
      STORAGE (INITIAL 20K NEXT 20K) TABLESPACE tbs_3
      NOLOGGING;

ALTER TABLE sales ADD PARTITION q1_2000
      VALUES LESS THAN (2000, 04, 01) COMPRESS
      SUBPARTITIONS 8 STORE IN tbs5;

ALTER TABLE diving MODIFY PARTITION locations_us
      ADD SUBPARTITION us_locs5 TABLESPACE us1;

ALTER TABLE quarterly_regional_sales 
   ADD PARTITION q1_2000 VALUES LESS THAN (TO_DATE('1-APR-2000','DD-MON-YYYY'))
      STORAGE (INITIAL 20K NEXT 20K) TABLESPACE ts3 NOLOGGING
         (
          SUBPARTITION q1_2000_northwest VALUES ('OR', 'WA'),
          SUBPARTITION q1_2000_southwest VALUES ('AZ', 'UT', 'NM'),
          SUBPARTITION q1_2000_northeast VALUES ('NY', 'VM', 'NJ'),
          SUBPARTITION q1_2000_southeast VALUES ('FL', 'GA'),
          SUBPARTITION q1_2000_northcentral VALUES ('SD', 'WI'),
          SUBPARTITION q1_2000_southcentral VALUES ('OK', 'TX')
         );

ALTER TABLE quarterly_regional_sales
   MODIFY PARTITION q1_1999 
      ADD SUBPARTITION q1_1999_south
         VALUES ('AR','MS','AL') tablespace ts2;

ALTER INDEX q1_sales_by_region_locix
   MODIFY DEFAULT ATTRIBUTES TABLESPACE tbs_4;

ALTER INDEX q1_sales_by_region_locix 
   REBUILD PARTITION q1_nonmainland TABLESPACE tbs_4;
 

ALTER INDEX hgidx ADD PARTITION p5;

Coalescing Partitions

Coalescing partitions is a way of reducing the number of partitions in a hash-partitioned table or index, or the number of subpartitions in a range-hash partitioned table. When a hash partition is coalesced, its contents are redistributed into one or more remaining partitions determined by the hash function. The specific partition that is coalesced is selected by the database, and is dropped after its contents have been redistributed.

Index partitions may be marked UNUSABLE as explained in the following table:

ALTER TABLE ouu1
     COALESCE PARTITION;

ALTER TABLE diving MODIFY PARTITION us_locations
     COALESCE SUBPARTITION;

ALTER INDEX hgidx COALESCE PARTITION;

Dropping Partitions

You can drop partitions from range, list, or composite range-list partitioned tables. For hash-partitioned tables, or hash subpartitions of range-hash partitioned tables, you must perform a coalesce operation instead.

ALTER TABLE sales DROP PARTITION dec98;
ALTER INDEX sales_area_ix REBUILD;

ALTER INDEX sales_area_ix REBUILD PARTITION jan99_ix;
ALTER INDEX sales_area_ix REBUILD PARTITION feb99_ix;
ALTER INDEX sales_area_ix REBUILD PARTITION mar99_ix;
...
ALTER INDEX sales_area_ix REBUILD PARTITION dec99_ix;

DELETE FROM sales WHERE TRANSID < 10000;
ALTER TABLE sales DROP PARTITION dec98;

ALTER TABLE sales DROP PARTITION dec98
     UPDATE INDEXES;

ALTER TABLE sales
   DISABLE CONSTRAINT dname_sales1;
ALTER TABLE sales DROP PARTITTION dec98;
ALTER TABLE sales
   ENABLE CONSTRAINT dname_sales1;

DELETE FROM sales WHERE TRANSID < 10000;
ALTER TABLE sales DROP PARTITION dec94;

ALTER INDEX npr DROP PARTITION P1;
ALTER INDEX npr REBUILD PARTITION P2;

Exchanging Partitions

You can convert a partition (or subpartition) into a nonpartitioned table, and a nonpartitioned table into a partition (or subpartition) of a partitioned table by exchanging their data segments. You can also convert a hash-partitioned table into a partition of a range-hash partitioned table, or convert the partition of the range-hash partitioned table into a hash-partitioned table. Similarly, you can convert a list-partitioned table into a partition of a range-list partitioned table, or convert the partition of the range-list partitioned table into a list-partitioned table

Exchanging table partitions is most useful when you have an application using nonpartitioned tables that you want to convert to partitions of a partitioned table. For example, in data warehousing environments exchanging partitions facilitates high-speed data loading of new, incremental data into an already existing partitioned table. Generically, OLTP as well as data warehousing environments benefit from exchanging old data partitions out of a partitioned table. The data is purged from the partitioned table without actually being deleted and can be archived separately afterwards.

When you exchange partitions, logging attributes are preserved. You can optionally specify if local indexes are also to be exchanged (INCLUDING INDEXES clause), and if rows are to be validated for proper mapping (WITH VALIDATION clause).

ALTER TABLE table_name 
     DISABLE CONSTRAINT constraint_name KEEP INDEX

Unless you specify UPDATE INDEXES (this cannot be specified for index-organized tables), the database marks UNUSABLE the global indexes, or all global index partitions, on the table whose partition is being exchanged. Global indexes, or global index partitions, on the table being exchanged remain invalidated.

ALTER TABLE stocks
    EXCHANGE PARTITION p3 WITH TABLE stock_table_3;

CREATE TABLE t1 (i NUMBER, j NUMBER)
     PARTITION BY HASH(i)
       (PARTITION p1, PARTITION p2);

CREATE TABLE t2 (i NUMBER, j NUMBER)
     PARTITION BY RANGE(j)
     SUBPARTITION BY HASH(i)
        (PARTITION p1 VALUES LESS THAN (10)
            SUBPARTITION t2_pls1
            SUBPARTITION t2_pls2,
         PARTITION p2 VALUES LESS THAN (20)
            SUBPARTITION t2_p2s1
            SUBPARTITION t2_p2s2));

ALTER TABLE t2 EXCHANGE PARTITION p1 WITH TABLE t1
     WITH VALIDATION;

ALTER TABLE sales EXCHANGE SUBPARTITION q3_1999_s1
      WITH TABLE q3_1999 INCLUDING INDEXES;

Merging Partitions

Use the ALTER TABLE ... MERGE PARTITION statement to merge the contents of two partitions into one partition. The two original partitions are dropped, as are any corresponding local indexes.

You cannot use this statement for a hash-partitioned table or for hash subpartitions of a range-hash partitioned table.

If the involved partitions or subpartitions contain data, indexes may be marked UNUSABLE as explained in the following table:

-- Create a Table with four partitions each on its own tablespace
-- Partitioned by range on the data column.
--
CREATE TABLE four_seasons
( 
        one DATE,
        two VARCHAR2(60),
        three NUMBER
)
PARTITION  BY RANGE ( one ) 
(
PARTITION quarter_one 
   VALUES LESS THAN ( TO_DATE('01-apr-1998','dd-mon-yyyy'))
   TABLESPACE quarter_one,
PARTITION quarter_two 
   VALUES LESS THAN ( TO_DATE('01-jul-1998','dd-mon-yyyy'))
   TABLESPACE quarter_two,
PARTITION quarter_three
   VALUES LESS THAN ( TO_DATE('01-oct-1998','dd-mon-yyyy'))
   TABLESPACE quarter_three,
PARTITION quarter_four
   VALUES LESS THAN ( TO_DATE('01-jan-1999','dd-mon-yyyy'))
   TABLESPACE quarter_four
);
-- 
-- Create local PREFIXED index on Four_Seasons
-- Prefixed because the leftmost columns of the index match the
-- Partition key 
--
CREATE INDEX i_four_seasons_l ON four_seasons ( one,two ) 
LOCAL ( 
PARTITION i_quarter_one TABLESPACE i_quarter_one,
PARTITION i_quarter_two TABLESPACE i_quarter_two,
PARTITION i_quarter_three TABLESPACE i_quarter_three,
PARTITION i_quarter_four TABLESPACE i_quarter_four
);

--
-- Merge the first two partitions 
--
ALTER TABLE four_seasons 
MERGE PARTITIONS quarter_one, quarter_two INTO PARTITION quarter_two
UPDATE INDEXES;

-- Rebuild index for quarter_two, which has been marked unusable 
-- because it has not had all of the data from Q1 added to it.
-- Rebuilding the index will correct this.
--
ALTER TABLE four_seasons MODIFY PARTITION 
quarter_two REBUILD UNUSABLE LOCAL INDEXES;

ALTER TABLE q1_sales_by_region 
   MERGE PARTITIONS q1_northcentral, q1_southcentral 
   INTO PARTITION q1_central 
      PCTFREE 50 STORAGE(MAXEXTENTS 20);

PARTITION q1_northcentral VALUES ('SD','WI')
PARTITION q1_southcentral VALUES ('OK','TX')

('SD','WI','OK','TX')

ALTER TABLE all_seasons
   MERGE PARTITIONS quarter_1, quarter_2 INTO PARTITION quarter_2
   SUBPARTITIONS 8;

ALTER TABLE stripe_regional_sales
   MERGE PARTITIONS q1_1999, q2_1999 INTO PARTITION q1_q2_1999
      PCTFREE 50 STORAGE(MAXEXTENTS 20);

ALTER TABLE quarterly_regional_sales
   MERGE SUBPARTITIONS q1_1999_northwest, q1_1999_southwest
      INTO SUBPARTITION q1_1999_west
         TABLESPACE ts4;

Modifying Default Attributes

You can modify the default attributes of a table, or for a partition of a composite partitioned table. When you modify default attributes, the new attributes affect only future partitions, or subpartitions, that are created. The default values can still be specifically overridden when creating a new partition or subpartition.

ALTER TABLE emp
      MODIFY DEFAULT ATTRIBUTES PCTFREE 25;

ALTER TABLE emp
     MODIFY DEFAULT ATTRIBUTES FOR PARTITION p1 TABLESPACE ts1;

Modifying Real Attributes of Partitions

It is possible to modify attributes of an existing partition of a table or index.

You cannot change the TABLESPACE attribute. Use ALTER TABLESPACE ... MOVE PARTITION/SUBPARTITION to move a partition or subpartition to a new tablespace.

ALTER TABLE sales MODIFY PARTITION sales_Q1
     STORAGE (MAXEXTENTS 10); 

ALTER TABLE scubagear MPDIFY PARTITION ts1 UNUSABLE LOCAL INDEXES;

ALTER TABLE dept MODIFY PARTITION p1
     REBUILD UNUSABLE LOCAL INDEXES;

ALTER TABLE emp MODIFY SUBPARTITION p3_s1
     REBUILD UNUSABLE LOCAL INDEXES;

Modifying List Partitions: Adding Values

List partitioning allows you the option of adding literal values from the defining value list.

ALTER TABLE sales_by_region
   MODIFY PARTITION region_south
      ADD VALUES ('OK', 'KS');

ALTER TABLE quarterly_regional_sales
   MODIFY SUBPARTITION q1_1999_southeast
      ADD VALUES ('KS');

Modifying List Partitions: Dropping Values

List partitioning allows you the option of dropping literal values from the defining value list.

ALTER TABLE sales_by_region
   MODIFY PARTITION region_south
      DROP VALUES ('OK', 'KS');

ALTER TABLE quarterly_regional_sales
   MODIFY SUBPARTITION q1_1999_southeast
      DROP VALUES ('KS');

Modifying a Subpartition Template

You can modify a subpartition template of a composite partitioned table by replacing it with a new subpartition template. Any subsequent operations that use the subpartition template (such as ADD PARTITION or MERGE PARTITIONS) will now use the new subpartition template. Existing subpartitions remain unchanged.

Use the ALTER TABLE ... SET SUBPARTITION TEMPLATE statement to specify a new subpartition template. For example:

ALTER TABLE emp_sub_template
   SET SUBPARTITION TEMPLATE
         (SUBPARTITION e, TABLESPACE ts1,
          SUBPARTITION f, TABLESPACE ts2,
          SUBPARTITION g, TABLESPACE ts3,
          SUBPARTITION h, TABLESPACE ts4
         );

You can drop a subpartition template by specifying an empty list:

ALTER TABLE emp_sub_template
   SET SUBPARTITION TEMPLATE ( );

Moving Partitions

Use the MOVE PARTITION clause of the ALTER TABLE statement to:

• Re-cluster data and reduce fragmentation

• Move a partition to another tablespace

• Modify create-time attributes

• Store the data in compressed format using table compression

Typically, you can change the physical storage attributes of a partition in a single step using an ALTER TABLE/INDEX ... MODIFY PARTITION statement. However, there are some physical attributes, such as TABLESPACE, that you cannot modify using MODIFY PARTITION. In these cases, use the MOVE PARTITION clause. Modifying some other attributes, such as table compression, affects only future storage, but not existing data.

If the partition being moved contains any data, indexes may be marked UNUSABLE according to the following table:

ALTER TABLE parts MOVE PARTITION depot2
     TABLESPACE ts094 NOLOGGING COMPRESS;

ALTER TABLE scuba_gear MOVE SUBPARTITION bcd_types 
     TABLESPACE tbs23 PARALLEL (DEGREE 2);

Rebuilding Index Partitions

Some reasons for rebuilding index partitions include:

• To recover space and improve performance

• To repair a damaged index partition caused by media failure

• To rebuild a local index partition after loading the underlying table partition with SQL*Loader or an import utility

• To rebuild index partitions that have been marked UNUSABLE

• To enable key compression for B-tree indexes

The following sections discuss your options for rebuilding index partitions and subpartitions.

ALTER INDEX scuba
   REBUILD SUBPARTITION bcd_types
   TABLESPACE tbs23 PARALLEL (DEGREE 2);

ALTER TABLE scubagear
   MODIFY PARTITION p1 REBUILD UNUSABLE LOCAL INDEXES;

Renaming Partitions

It is possible to rename partitions and subpartitions of both tables and indexes. One reason for renaming a partition might be to assign a meaningful name, as opposed to a default system name that was assigned to the partition in another maintenance operation.

ALTER TABLE scubagear RENAME PARTITION sys_p636 TO tanks;

ALTER INDEX scuba RENAME SUBPARTITION sys_subp3254 TO bcd_types;

Splitting Partitions

The SPLIT PARTITION clause of the ALTER TABLE or ALTER INDEX statement is used to redistribute the contents of a partition into two new partitions. Consider doing this when a partition becomes too large and causes backup, recovery, or maintenance operations to take a long time to complete. You can also use the SPLIT PARTITION clause to redistribute the I/O load.

This clause cannot be used for hash partitions or subpartitions.

If the partition you are splitting contains any data, indexes may be marked UNUSABLE as explained in the following table:

ALTER TABLE vet_cats SPLIT PARTITION 
      fee_katy at (100) INTO ( PARTITION
      fee_katy1 ..., PARTITION fee_katy2 ...);
ALTER INDEX JAF1 REBUILD PARTITION fee_katy1;
ALTER INDEX JAF1 REBUILD PARTITION fee_katy2;
ALTER INDEX VET REBUILD PARTITION vet_parta;
ALTER INDEX VET REBUILD PARTITION vet_partb;

ALTER TABLE sales_by_region 
   SPLIT PARTITION region_east VALUES ('CT', 'VA', 'MD') 
   INTO 
    ( PARTITION region_east_1 
         PCTFREE 25 TABLESPACE tbs2,
      PARTITION region_east_2
        STORAGE (NEXT 2M PCTINCREASE 25)) 
   PARALLEL 5;

PARTITION region_east VALUES ('MA','NY','CT','NH','ME','MD','VA','PA','NJ')

ALTER TABLE sales_by_region 
   SPLIT PARTITION region_unknown VALUES ('MT', 'WY', 'ID') 
   INTO 
    ( PARTITION region_wildwest,
      PARTITION region_unknown);

ALTER TABLE all_seasons SPLIT PARTITION quarter_1 
     AT (TO_DATE('16-dec-1997','dd-mon-yyyy'))
     INTO (PARTITION q1_1997_1 SUBPARTITIONS 4 STORE IN (ts1,ts3),
           PARTITION q1_1997­_2);

ALTER TABLE quarterly_regional_sales SPLIT PARTITION q1_1999
   AT (to_date('15-Feb-1999','dd-mon-yyyy'))
   INTO ( PARTITION q1_1999_jan_feb
             PCTFREE 25 TABLESPACE ts1,
          PARTITION q1_1999_feb_mar
             STORAGE (NEXT 2M PCTINCREASE 25) TABLESPACE ts2) 
   PARALLEL 5;

SELECT PARTITION_NAME, SUBPARTITION_NAME, TABLESPACE_NAME
  FROM DBA_TAB_SUBPARTITIONS
  WHERE TABLE_NAME='QUARTERLY_REGIONAL_SALES'
  ORDER BY PARTITION_NAME;

PARTITION_NAME       SUBPARTITION_NAME              TABLESPACE_NAME
-------------------- ------------------------------ ---------------
Q1_1999_FEB_MAR      Q1_1999_FEB_MAR_WEST           TS2
Q1_1999_FEB_MAR      Q1_1999_FEB_MAR_NORTHEAST      TS2
Q1_1999_FEB_MAR      Q1_1999_FEB_MAR_SOUTHEAST      TS2
Q1_1999_FEB_MAR      Q1_1999_FEB_MAR_NORTHCENTRAL   TS2
Q1_1999_FEB_MAR      Q1_1999_FEB_MAR_SOUTHCENTRAL   TS2
Q1_1999_FEB_MAR      Q1_1999_FEB_MAR_SOUTH          TS2
Q1_1999_JAN_FEB      Q1_1999_JAN_FEB_WEST           TS1
Q1_1999_JAN_FEB      Q1_1999_JAN_FEB_NORTHEAST      TS1
Q1_1999_JAN_FEB      Q1_1999_JAN_FEB_SOUTHEAST      TS1
Q1_1999_JAN_FEB      Q1_1999_JAN_FEB_NORTHCENTRAL   TS1
Q1_1999_JAN_FEB      Q1_1999_JAN_FEB_SOUTHCENTRAL   TS1
Q1_1999_JAN_FEB      Q1_1999_JAN_FEB_SOUTH          TS1
Q1_2000              Q1_2000_NORTHWEST              TS3
Q1_2000              Q1_2000_SOUTHWEST              TS3
Q1_2000              Q1_2000_NORTHEAST              TS3
Q1_2000              Q1_2000_SOUTHEAST              TS3
Q1_2000              Q1_2000_NORTHCENTRAL           TS3
Q1_2000              Q1_2000_SOUTHCENTRAL           TS3
Q2_1999              Q2_1999_NORTHWEST              TS4
Q2_1999              Q2_1999_SOUTHWEST              TS4
Q2_1999              Q2_1999_NORTHEAST              TS4
Q2_1999              Q2_1999_SOUTHEAST              TS4
Q2_1999              Q2_1999_NORTHCENTRAL           TS4
Q2_1999              Q2_1999_SOUTHCENTRAL           TS4
Q3_1999              Q3_1999_NORTHWEST              TS4
Q3_1999              Q3_1999_SOUTHWEST              TS4
Q3_1999              Q3_1999_NORTHEAST              TS4
Q3_1999              Q3_1999_SOUTHEAST              TS4
Q3_1999              Q3_1999_NORTHCENTRAL           TS4
Q3_1999              Q3_1999_SOUTHCENTRAL           TS4
Q4_1999              Q4_1999_NORTHWEST              TS4
Q4_1999              Q4_1999_SOUTHWEST              TS4
Q4_1999              Q4_1999_NORTHEAST              TS4
Q4_1999              Q4_1999_SOUTHEAST              TS4
Q4_1999              Q4_1999_NORTHCENTRAL           TS4
Q4_1999              Q4_1999_SOUTHCENTRAL           TS4

36 rows selected.

ALTER TABLE quarterly_regional_sales SPLIT SUBPARTITION q2_1999_southwest
   VALUES ('UT') INTO
      ( SUBPARTITION q2_1999_utah
           TABLESPACE ts2,
        SUBPARTITION q2_1999_southwest
           TABLESPACE ts3
      ) 
   PARALLEL;

ALTER INDEX quon1 SPLIT 
    PARTITION canada AT ( 100 ) INTO 
    PARTITION canada1 ..., PARTITION canada2 ...);
ALTER INDEX quon1 REBUILD PARTITION canada1;
ALTER INDEX quon1 REBUILD PARTITION canada2;

Truncating Partitions

Use the ALTER TABLE ... TRUNCATE PARTITION statement to remove all rows from a table partition. Truncating a partition is similar to dropping a partition, except that the partition is emptied of its data, but not physically dropped.

You cannot truncate an index partition. However, if local indexes are defined for the table, the ALTER TABLE ... TRUNCATE PARTITION statement truncates the matching partition in each local index. Unless you specify UPDATE INDEXES (cannot be specified for index-organized tables), any global indexes are marked UNUSABLE and must be rebuilt.

ALTER TABLE sales TRUNCATE PARTITION dec98;
ALTER INDEX sales_area_ix REBUILD;

DELETE FROM sales WHERE TRANSID < 10000;
ALTER TABLE sales TRUNCATE PARTITION dec98;

ALTER TABLE sales TRUNCATE PARTITION dec98
     UPDATE INDEXES;

ALTER TABLE sales
    DISABLE CONSTRAINT dname_sales1;
ALTER TABLE sales TRUNCATE PARTITTION dec94;
ALTER TABLE sales
    ENABLE CONSTRAINT dname_sales1;

DELETE FROM sales WHERE TRANSID < 10000;
ALTER TABLE sales TRUNCATE PARTITION dec94;

ALTER TABLE diving
   TRUNCATE SUBPARTITION us_locations
      DROP STORAGE;