The ed utility shall operate on a copy of the file it is editing; changes made to the copy shall have no effect on the
file until a w (write) command is given. The copy of the text is called the buffer.
Commands to ed have a simple and regular structure: zero, one, or two addresses followed by a single-character
command, possibly followed by parameters to that command. These addresses specify one or more lines in the buffer. Every
command that requires addresses has default addresses, so that the addresses very often can be omitted. If the -p option is
specified, the prompt string shall be written to standard output before each command is read.
In general, only one command can appear on a line. Certain commands allow text to be input. This text is placed in the
appropriate place in the buffer. While ed is accepting text, it is said to be in input mode. In this mode, no
commands shall be recognized; all input is merely collected. Input mode is terminated by entering a line consisting of two
characters: a period ( '.' ) followed by a <newline>. This line is not considered part of the input text.
Regular Expressions in ed
The ed utility shall support basic regular expressions, as described in the Base Definitions volume of
IEEE Std 1003.1-2001, Section 9.3, Basic Regular Expressions. Since
regular expressions in ed are always matched against single lines (excluding the terminating <newline>s), never
against any larger section of text, there is no way for a regular expression to match a <newline>.
A null RE shall be equivalent to the last RE encountered.
Regular expressions are used in addresses to specify lines, and in some commands (for example, the s substitute command)
to specify portions of a line to be substituted.
Addresses in ed
Addressing in ed relates to the current line. Generally, the current line is the last line affected by a command. The
current line number is the address of the current line. If the edit buffer is not empty, the initial value for the current line
shall be the last line in the edit buffer; otherwise, zero.
Addresses shall be constructed as follows:
-
The period character ( '.' ) shall address the current line.
-
The dollar sign character ( '$' ) shall address the last line of the edit buffer.
-
The positive decimal number n shall address the nth line of the edit buffer.
-
The apostrophe-x character pair ( "'x" ) shall address the line marked with the mark name character x, which
shall be a lowercase letter from the portable character set. It shall be an error if the character has not been set to mark a line
or if the line that was marked is not currently present in the edit buffer.
-
A BRE enclosed by slash characters ( '/' ) shall address the first line found by searching forwards from the line
following the current line toward the end of the edit buffer and stopping at the first line for which the line excluding the
terminating <newline> matches the BRE. The BRE consisting of a null BRE delimited by a pair of slash characters shall address
the next line for which the line excluding the terminating <newline> matches the last BRE encountered. In addition, the
second slash can be omitted at the end of a command line. Within the BRE, a backslash-slash pair ( "\/" ) shall represent
a literal slash instead of the BRE delimiter. If necessary, the search shall wrap around to the beginning of the buffer and
continue up to and including the current line, so that the entire buffer is searched.
-
A BRE enclosed by question-mark characters ( '?' ) shall address the first line found by searching backwards from the
line preceding the current line toward the beginning of the edit buffer and stopping at the first line for which the line excluding
the terminating <newline> matches the BRE. The BRE consisting of a null BRE delimited by a pair of question-mark characters (
"??" ) shall address the previous line for which the line excluding the terminating <newline> matches the last BRE
encountered. In addition, the second question-mark can be omitted at the end of a command line. Within the BRE, a
backslash-question-mark pair ( "\?" ) shall represent a literal question mark instead of the BRE delimiter. If necessary,
the search shall wrap around to the end of the buffer and continue up to and including the current line, so that the entire buffer
is searched.
-
A plus-sign ( '+' ) or hyphen character ( '-' ) followed by a decimal number shall address the current line
plus or minus the number. A plus-sign or hyphen character not followed by a decimal number shall address the current line plus or
minus 1.
Addresses can be followed by zero or more address offsets, optionally <blank>-separated. Address offsets are constructed
as follows:
-
A plus-sign or hyphen character followed by a decimal number shall add or subtract, respectively, the indicated number of lines
to or from the address. A plus-sign or hyphen character not followed by a decimal number shall add or subtract 1 to or from the
address.
-
A decimal number shall add the indicated number of lines to the address.
It shall not be an error for an intermediate address value to be less than zero or greater than the last line in the edit
buffer. It shall be an error for the final address value to be less than zero or greater than the last line in the edit buffer. It
shall be an error if a search for a BRE fails to find a matching line.
Commands accept zero, one, or two addresses. If more than the required number of addresses are provided to a command that
requires zero addresses, it shall be an error. Otherwise, if more than the required number of addresses are provided to a command,
the addresses specified first shall be evaluated and then discarded until the maximum number of valid addresses remain, for the
specified command.
Addresses shall be separated from each other by a comma ( ',' ) or semicolon character ( ';' ). In the case of
a semicolon separator, the current line ( '.' ) shall be set to the first address, and only then will the second address
be calculated. This feature can be used to determine the starting line for forwards and backwards searches; see rules 5. and 6.
Addresses can be omitted on either side of the comma or semicolon separator, in which case the resulting address pairs shall be
as follows:
|
Specified
|
Resulting
|
|
,
|
1 , $
|
|
, addr
|
1 , addr
|
|
addr ,
|
addr , addr
|
|
;
|
. ; $
|
|
; addr
|
. ; addr
|
|
addr ;
|
addr ; addr
|
Any <blank>s included between addresses, address separators, or address offsets shall be ignored.
Commands in ed
In the following list of ed commands, the default addresses are shown in parentheses. The number of addresses shown in
the default shall be the number expected by the command. The parentheses are not part of the address; they show that the given
addresses are the default.
It is generally invalid for more than one command to appear on a line. However, any command (except e, E,
f, q, Q, r, w, and !) can be suffixed by the letter l, n, or p; in
which case, except for the l, n, and p commands, the command shall be executed and then the new current line
shall be written as described below under the l, n, and p commands. When an l, n, or p
suffix is used with an l, n, or p command, the command shall write to standard output as described below, but
it is unspecified whether the suffix writes the current line again in the requested format or whether the suffix has no effect. For
example, the pl command (base p command with an l suffix) shall either write just the current line or write it
twice-once as specified for p and once as specified for l. Also, the g, G, v, and V
commands shall take a command as a parameter.
Each address component can be preceded by zero or more <blank>s. The command letter can be preceded by zero or more
<blank>s. If a suffix letter ( l, n, or p) is given, the application shall ensure that it immediately
follows the command.
The e, E, f, r, and w commands shall take an optional file parameter, separated from
the command letter by one or more <blank>s.
If changes have been made in the buffer since the last w command that wrote the entire buffer, ed shall warn the
user if an attempt is made to destroy the editor buffer via the e or q commands. The ed utility shall write
the string:
"?\n"
(followed by an explanatory message if help mode has been enabled via the H command) to standard output and shall
continue in command mode with the current line number unchanged. If the e or q command is repeated with no
intervening command, it shall take effect.
If a terminal disconnect is detected:
-
If the buffer is not empty and has changed since the last write, the ed utility shall attempt to write a copy of the
buffer to a file named ed.hup in the current directory. If this write fails, ed shall attempt to write a copy of the
buffer to a filename ed.hup in the directory named by the HOME environment variable. If both these attempts fail,
ed shall exit without saving the buffer.
-
The ed utility shall not write the file to the currently remembered pathname or return to command mode, and shall
terminate with a non-zero exit status.
If an end-of-file is detected on standard input:
-
If the ed utility is in input mode, ed shall terminate input mode and return to command mode. It is unspecified if
any partially entered lines (that is, input text without a terminating <newline>) are discarded from the input text.
-
If the ed utility is in command mode, it shall act as if a q command had been entered.
If the closing delimiter of an RE or of a replacement string (for example, '/' ) in a g, G, s,
v, or V command would be the last character before a <newline>, that delimiter can be omitted, in which case
the addressed line shall be written. For example, the following pairs of commands are equivalent:
s/s1/s2 s/s1/s2/p
g/s1 g/s1/p
?s1 ?s1?
If an invalid command is entered, ed shall write the string:
"?\n"
(followed by an explanatory message if help mode has been enabled via the H command) to standard output and shall
continue in command mode with the current line number unchanged.
Append Command
- Synopsis:
-
(.)a
<text>
.
The a command shall read the given text and append it after the addressed line; the current line number shall become the
address of the last inserted line or, if there were none, the addressed line. Address 0 shall be valid for this command; it shall
cause the appended text to be placed at the beginning of the buffer.
Change Command
- Synopsis:
-
(.,.)c
<text>
.
The c command shall delete the addressed lines, then accept input text that replaces these lines; the current line shall
be set to the address of the last line input; or, if there were none, at the line after the last line deleted; if the lines deleted
were originally at the end of the buffer, the current line number shall be set to the address of the new last line; if no lines
remain in the buffer, the current line number shall be set to zero. Address 0 shall be valid for this command; it shall be
interpreted as if address 1 were specified.
Delete Command
- Synopsis:
-
(.,.)d
The d command shall delete the addressed lines from the buffer. The address of the line after the last line deleted shall
become the current line number; if the lines deleted were originally at the end of the buffer, the current line number shall be set
to the address of the new last line; if no lines remain in the buffer, the current line number shall be set to zero.
Edit Command
- Synopsis:
-
e [file]
The e command shall delete the entire contents of the buffer and then read in the file named by the pathname file.
The current line number shall be set to the address of the last line of the buffer. If no pathname is given, the currently
remembered pathname, if any, shall be used (see the f command). The number of bytes read shall be written to standard
output, unless the -s option was specified, in the following format:
"%d\n", <number of bytes read>
The name file shall be remembered for possible use as a default pathname in subsequent e, E, r, and
w commands. If file is replaced by '!' , the rest of the line shall be taken to be a shell command line
whose output is to be read. Such a shell command line shall not be remembered as the current file. All marks shall be
discarded upon the completion of a successful e command. If the buffer has changed since the last time the entire buffer was
written, the user shall be warned, as described previously.
Edit Without Checking Command
- Synopsis:
-
E [file]
The E command shall possess all properties and restrictions of the e command except that the editor shall not
check to see whether any changes have been made to the buffer since the last w command.
Filename Command
- Synopsis:
-
f [file]
If file is given, the f command shall change the currently remembered pathname to file; whether the name is
changed or not, it shall then write the (possibly new) currently remembered pathname to the standard output in the following
format:
"%s\n", <pathname>
The current line number shall be unchanged.
Global Command
- Synopsis:
-
(1,$)g/RE/command list
In the g command, the first step shall be to mark every line for which the line excluding the terminating <newline>
matches the given RE. Then, going sequentially from the beginning of the file to the end of the file, the given command list
shall be executed for each marked line, with the current line number set to the address of that line. Any line modified by the
command list shall be unmarked. When the g command completes, the current line number shall have the value assigned
by the last command in the command list. If there were no matching lines, the current line number shall not be changed. A
single command or the first of a list of commands shall appear on the same line as the global command. All lines of a multi-line
list except the last line shall be ended with a backslash preceding the terminating <newline>; the a, i, and
c commands and associated input are permitted. The '.' terminating input mode can be omitted if it would be the
last line of the command list. An empty command list shall be equivalent to the p command. The use of the
g, G, v, V, and ! commands in the command list produces undefined results. Any character
other than <space> or <newline> can be used instead of a slash to delimit the RE. Within the RE, the RE delimiter
itself can be used as a literal character if it is preceded by a backslash.
Interactive Global Command
- Synopsis:
-
(1,$)G/RE/
In the G command, the first step shall be to mark every line for which the line excluding the terminating <newline>
matches the given RE. Then, for every such line, that line shall be written, the current line number shall be set to the address of
that line, and any one command (other than one of the a, c, i, g, G, v, and V
commands) shall be read and executed. A <newline> shall act as a null command (causing no action to be taken on the current
line); an '&' shall cause the re-execution of the most recent non-null command executed within the current invocation
of G. Note that the commands input as part of the execution of the G command can address and affect any lines in the
buffer. Any line modified by the command shall be unmarked. The final value of the current line number shall be the value set by
the last command successfully executed. (Note that the last command successfully executed shall be the G command itself if a
command fails or the null command is specified.) If there were no matching lines, the current line number shall not be changed. The
G command can be terminated by a SIGINT signal. Any character other than <space> or <newline> can be used
instead of a slash to delimit the RE and the replacement. Within the RE, the RE delimiter itself can be used as a literal character
if it is preceded by a backslash.
Help Command
- Synopsis:
-
h
The h command shall write a short message to standard output that explains the reason for the most recent '?'
notification. The current line number shall be unchanged.
Help-Mode Command
- Synopsis:
-
H
The H command shall cause ed to enter a mode in which help messages (see the h command) shall be written to
standard output for all subsequent '?' notifications. The H command alternately shall turn this mode on and off; it
is initially off. If the help-mode is being turned on, the H command also explains the previous '?' notification,
if there was one. The current line number shall be unchanged.
Insert Command
- Synopsis:
-
(.)i
<text>
.
The i command shall insert the given text before the addressed line; the current line is set to the last inserted line
or, if there was none, to the addressed line. This command differs from the a command only in the placement of the input
text. Address 0 shall be valid for this command; it shall be interpreted as if address 1 were specified.
Join Command
- Synopsis:
-
(.,.+1)j
The j command shall join contiguous lines by removing the appropriate <newline>s. If exactly one address is given,
this command shall do nothing. If lines are joined, the current line number shall be set to the address of the joined line;
otherwise, the current line number shall be unchanged.
Mark Command
- Synopsis:
-
(.)kx
The k command shall mark the addressed line with name x, which the application shall ensure is a lowercase letter
from the portable character set. The address "'x" shall then refer to this line; the current line number shall be
unchanged.
List Command
- Synopsis:
-
(.,.)l
The l command shall write to standard output the addressed lines in a visually unambiguous form. The characters listed in
the Base Definitions volume of IEEE Std 1003.1-2001, Table 5-1, Escape Sequences and Associated Actions ( '\\' ,
'\a' , '\b' , '\f' , '\r' , '\t' , '\v' ) shall be written as the
corresponding escape sequence; the '\n' in that table is not applicable. Non-printable characters not in the table shall
be written as one three-digit octal number (with a preceding backslash character) for each byte in the character (most significant
byte first). If the size of a byte on the system is greater than nine bits, the format used for non-printable characters is
implementation-defined.
Long lines shall be folded, with the point of folding indicated by <newline> preceded by a backslash; the length at which
folding occurs is unspecified, but should be appropriate for the output device. The end of each line shall be marked with a
'$' , and '$' characters within the text shall be written with a preceding backslash. An l command can be
appended to any other command other than e, E, f, q, Q, r, w, or !. The
current line number shall be set to the address of the last line written.
Move Command
- Synopsis:
-
(.,.)maddress
The m command shall reposition the addressed lines after the line addressed by address. Address 0 shall be valid
for address and cause the addressed lines to be moved to the beginning of the buffer. It shall be an error if address
address falls within the range of moved lines. The current line number shall be set to the address of the last line
moved.
Number Command
- Synopsis:
-
(.,.)n
The n command shall write to standard output the addressed lines, preceding each line by its line number and a
<tab>; the current line number shall be set to the address of the last line written. The n command can be appended to
any command other than e, E, f, q, Q, r, w, or !.
Print Command
- Synopsis:
-
(.,.)p
The p command shall write to standard output the addressed lines; the current line number shall be set to the address of
the last line written. The p command can be appended to any command other than e, E, f, q,
Q, r, w, or !.
Prompt Command
- Synopsis:
-
P
The P command shall cause ed to prompt with an asterisk ( '*' ) (or string, if -p is
specified) for all subsequent commands. The P command alternatively shall turn this mode on and off; it shall be initially
on if the -p option is specified; otherwise, off. The current line number shall be unchanged.
Quit Command
- Synopsis:
-
q
The q command shall cause ed to exit. If the buffer has changed since the last time the entire buffer was written,
the user shall be warned, as described previously.
Quit Without Checking Command
- Synopsis:
-
Q
The Q command shall cause ed to exit without checking whether changes have been made in the buffer since the last
w command.
Read Command
- Synopsis:
-
($)r [file]
The r command shall read in the file named by the pathname file and append it after the addressed line. If no
file argument is given, the currently remembered pathname, if any, shall be used (see the e and f commands).
The currently remembered pathname shall not be changed unless there is no remembered pathname. Address 0 shall be valid for
r and shall cause the file to be read at the beginning of the buffer. If the read is successful, and -s was not
specified, the number of bytes read shall be written to standard output in the following format:
"%d\n", <number of bytes read>
The current line number shall be set to the address of the last line read in. If file is replaced by '!' , the
rest of the line shall be taken to be a shell command line whose output is to be read. Such a shell command line shall not be
remembered as the current pathname.
Substitute Command
- Synopsis:
-
(.,.)s/RE/replacement/flags
The s command shall search each addressed line for an occurrence of the specified RE and replace either the first or all
(non-overlapped) matched strings with the replacement; see the following description of the g suffix. It is an error
if the substitution fails on every addressed line. Any character other than <space> or <newline> can be used instead of
a slash to delimit the RE and the replacement. Within the RE, the RE delimiter itself can be used as a literal character if it is
preceded by a backslash. The current line shall be set to the address of the last line on which a substitution occurred.
An ampersand ( '&' ) appearing in the replacement shall be replaced by the string matching the RE on the
current line. The special meaning of '&' in this context can be suppressed by preceding it by backslash. As a more
general feature, the characters '\n' , where n is a digit, shall be replaced by the text matched by the
corresponding back-reference expression. When the character '%' is the only character in the replacement, the
replacement used in the most recent substitute command shall be used as the replacement in the current substitute
command; if there was no previous substitute command, the use of '%' in this manner shall be an error. The '%'
shall lose its special meaning when it is in a replacement string of more than one character or is preceded by a backslash. For
each backslash ( '\' ) encountered in scanning replacement from beginning to end, the following character shall
lose its special meaning (if any). It is unspecified what special meaning is given to any character other than '&' ,
'\' , '%' , or digits.
A line can be split by substituting a <newline> into it. The application shall ensure it escapes the <newline> in
the replacement by preceding it by backslash. Such substitution cannot be done as part of a g or v command
list. The current line number shall be set to the address of the last line on which a substitution is performed. If no
substitution is performed, the current line number shall be unchanged. If a line is split, a substitution shall be considered to
have been performed on each of the new lines for the purpose of determining the new current line number. A substitution shall be
considered to have been performed even if the replacement string is identical to the string that it replaces.
The application shall ensure that the value of flags is zero or more of:
- count
- Substitute for the countth occurrence only of the RE found on each addressed line.
- g
- Globally substitute for all non-overlapping instances of the RE rather than just the first one. If both g and
count are specified, the results are unspecified.
- l
- Write to standard output the final line in which a substitution was made. The line shall be written in the format specified for
the l command.
- n
- Write to standard output the final line in which a substitution was made. The line shall be written in the format specified for
the n command.
- p
- Write to standard output the final line in which a substitution was made. The line shall be written in the format specified for
the p command.
Copy Command
- Synopsis:
-
(.,.)taddress
The t command shall be equivalent to the m command, except that a copy of the addressed lines shall be placed
after address address (which can be 0); the current line number shall be set to the address of the last line added.
Undo Command
- Synopsis:
-
u
The u command shall nullify the effect of the most recent command that modified anything in the buffer, namely the most
recent a, c, d, g, i, j, m, r, s, t, u, v,
G, or V command. All changes made to the buffer by a g, G, v, or V global command shall
be undone as a single change; if no changes were made by the global command (such as with g/RE/ p), the u
command shall have no effect. The current line number shall be set to the value it had immediately before the command being undone
started.
Global Non-Matched Command
- Synopsis:
-
(1,$)v/RE/command list
This command shall be equivalent to the global command g except that the lines that are marked during the first step
shall be those for which the line excluding the terminating <newline> does not match the RE.
Interactive Global Not-Matched Command
- Synopsis:
-
(1,$)V/RE/
This command shall be equivalent to the interactive global command G except that the lines that are marked during the
first step shall be those for which the line excluding the terminating <newline> does not match the RE.
Write Command
- Synopsis:
-
(1,$)w [file]
The w command shall write the addressed lines into the file named by the pathname file. The command shall create
the file, if it does not exist, or shall replace the contents of the existing file. The currently remembered pathname shall not be
changed unless there is no remembered pathname. If no pathname is given, the currently remembered pathname, if any, shall be used
(see the e and f commands); the current line number shall be unchanged. If the command is successful, the number of
bytes written shall be written to standard output, unless the -s option was specified, in the following format:
"%d\n", <number of bytes written>
If file begins with '!' , the rest of the line shall be taken to be a shell command line whose standard input
shall be the addressed lines. Such a shell command line shall not be remembered as the current pathname. This usage of the write
command with '!' shall not be considered as a "last w command that wrote the entire buffer", as described
previously; thus, this alone shall not prevent the warning to the user if an attempt is made to destroy the editor buffer via the
e or q commands.
Line Number Command
- Synopsis:
-
($)=
The line number of the addressed line shall be written to standard output in the following format:
"%d\n", <line number>
The current line number shall be unchanged by this command.
Shell Escape Command
- Synopsis:
-
!command
The remainder of the line after the '!' shall be sent to the command interpreter to be interpreted as a shell command
line. Within the text of that shell command line, the unescaped character '%' shall be replaced with the remembered
pathname; if a '!' appears as the first character of the command, it shall be replaced with the text of the previous shell
command executed via '!' . Thus, "!!" shall repeat the previous !command. If any replacements of
'%' or '!' are performed, the modified line shall be written to the standard output before command is
executed. The ! command shall write:
"!\n"
to standard output upon completion, unless the -s option is specified. The current line number shall be unchanged.
Null Command
- Synopsis:
-
(.+1)
An address alone on a line shall cause the addressed line to be written. A <newline> alone shall be equivalent to
"+1p" . The current line number shall be set to the address of the written line.
The initial description of this utility was adapted from the SVID. It contains some features not found in Version 7 or
BSD-derived systems. Some of the differences between the POSIX and BSD ed utilities include, but need not be limited to:
-
The BSD - option does not suppress the '!' prompt after a ! command.
-
BSD does not support the special meanings of the '%' and '!' characters within a ! command.
-
BSD does not support the addresses ';' and ',' .
-
BSD allows the command/suffix pairs pp, ll, and so on, which are unspecified in this volume of
IEEE Std 1003.1-2001.
-
BSD does not support the '!' character part of the e, r, or w commands.
-
A failed g command in BSD sets the line number to the last line searched if there are no matches.
-
BSD does not default the command list to the p command.
-
BSD does not support the G, h, H, n, or V commands.
-
On BSD, if there is no inserted text, the insert command changes the current line to the referenced line -1; that is, the line
before the specified line.
-
On BSD, the join command with only a single address changes the current line to that
address.
-
BSD does not support the P command; moreover, in BSD it is synonymous with the p command.
-
BSD does not support the undo of the commands j, m, r, s, or t.
-
The Version 7 ed command W, and the BSD ed commands W, wq, and z are not present in
this volume of IEEE Std 1003.1-2001.
The -s option was added to allow the functionality of the now withdrawn - option in a manner compatible with the
Utility Syntax Guidelines.
In early proposals there was a limit, {ED_FILE_MAX}, that described the historical limitations of some ed utilities in
their handling of large files; some of these have had problems with files larger than 100000 bytes. It was this limitation that
prompted much of the desire to include a split command in this volume of
IEEE Std 1003.1-2001. Since this limit was removed, this volume of IEEE Std 1003.1-2001 requires that
implementations document the file size limits imposed by ed in the conformance document. The limit {ED_LINE_MAX} was also
removed; therefore, the global limit {LINE_MAX} is used for input and output lines.
The manner in which the l command writes non-printable characters was changed to avoid the historical
backspace-overstrike method. On video display terminals, the overstrike is ambiguous because most terminals simply replace
overstruck characters, making the l format not useful for its intended purpose of unambiguously understanding the content of
the line. The historical backslash escapes were also ambiguous. (The string "a\0011" could represent a line containing
those six characters or a line containing the three characters 'a' , a byte with a binary value of 1, and a 1.) In the
format required here, a backslash appearing in the line is written as "\\" so that the output is truly unambiguous. The
method of marking the ends of lines was adopted from the ex editor and is required for
any line ending in <space>s; the '$' is placed on all lines so that a real '$' at the end of a line cannot
be misinterpreted.
Systems with bytes too large to fit into three octal digits must devise other means of displaying non-printable characters.
Consideration was given to requiring that the number of octal digits be large enough to hold a byte, but this seemed to be too
confusing for applications on the vast majority of systems where three digits are adequate. It would be theoretically possible for
the application to use the getconf utility to find out the CHAR_BIT value and deal
with such an algorithm; however, there is really no portable way that an application can use the octal values of the bytes across
various coded character sets, so the additional specification was not worthwhile.
The description of how a NUL is written was removed. The NUL character cannot be in text files, and this volume of
IEEE Std 1003.1-2001 should not dictate behavior in the case of undefined, erroneous input.
Unlike some of the other editing utilities, the filenames accepted by the E, e, R, and r commands
are not patterns.
Early proposals stated that the -p option worked only when standard input was associated with a terminal device. This has
been changed to conform to historical implementations, thereby allowing applications to interpose themselves between a user and the
ed utility.
The form of the substitute command that uses the n suffix was limited in some historical documentation (where this was
described incorrectly as "backreferencing"). This limit has been omitted because there is no reason why an editor processing
lines of {LINE_MAX} length should have this restriction. The command s/x/X/2047 should be able to substitute the 2047th
occurrence of 'x' on a line.
The use of printing commands with printing suffixes (such as pn, lp, and so on) was made unspecified because
BSD-based systems allow this, whereas System V does not.
Some BSD-based systems exit immediately upon receipt of end-of-file if all of the lines in the file have been deleted. Since
this volume of IEEE Std 1003.1-2001 refers to the q command in this instance, such behavior is not allowed.
Some historical implementations returned exit status zero even if command errors had occurred; this is not allowed by this
volume of IEEE Std 1003.1-2001.
Some historical implementations contained a bug that allowed a single period to be entered in input mode as <backslash>
<period> <newline>. This is not allowed by ed because there is no description of escaping any of the characters
in input mode; backslashes are entered into the buffer exactly as typed. The typical method of entering a single period has been to
precede it with another character and then use the substitute command to delete that character.
It is difficult under some modes of some versions of historical operating system terminal drivers to distinguish between an
end-of-file condition and terminal disconnect. IEEE Std 1003.1-2001 does not require implementations to distinguish
between the two situations, which permits historical implementations of the ed utility on historical platforms to conform.
Implementations are encouraged to distinguish between the two, if possible, and take appropriate action on terminal disconnect.
Historically, ed accepted a zero address for the a and r commands in order to insert text at the start of
the edit buffer. When the buffer was empty the command .= returned zero. IEEE Std 1003.1-2001 requires conformance
to historical practice.
For consistency with the a and r commands and better user functionality, the i and c commands must
also accept an address of 0, in which case 0i is treated as 1i and likewise for the c command.
All of the following are valid addresses:
- +++
- Three lines after the current line.
- /pattern/-
- One line before the next occurrence of pattern.
- -2
- Two lines before the current line.
- 3 ---- 2
- Line one (note the intermediate negative address).
- 1 2 3
- Line six.
Any number of addresses can be provided to commands taking addresses; for example, "1,2,3,4,5p" prints lines 4 and 5,
because two is the greatest valid number of addresses accepted by the print command. This, in combination with the semicolon
delimiter, permits users to create commands based on ordered patterns in the file. For example, the command "3;/foo/;+2p"
will display the first line after line 3 that contains the pattern foo, plus the next two lines. Note that the address
"3;" must still be evaluated before being discarded, because the search origin for the "/foo/" command depends on
this.
Historically, ed disallowed address chains, as discussed above, consisting solely of comma or semicolon separators; for
example, ",,," or ";;;" were considered an error. For consistency of address specification, this restriction is
removed. The following table lists some of the address forms now possible:
|
Address
|
Addr1
|
Addr2
|
Status
|
Comment
|
|
7,
|
7
|
7
|
Historical
|
|
|
7,5,
|
5
|
5
|
Historical
|
|
|
7,5,9
|
5
|
9
|
Historical
|
|
|
7,9
|
7
|
9
|
Historical
|
|
|
7,+
|
7
|
8
|
Historical
|
|
|
,
|
1
|
$
|
Historical
|
|
|
,7
|
1
|
7
|
Extension
|
|
|
,,
|
$
|
$
|
Extension
|
|
|
,;
|
$
|
$
|
Extension
|
|
|
7;
|
7
|
7
|
Historical
|
|
|
7;5;
|
5
|
5
|
Historical
|
|
|
7;5;9
|
5
|
9
|
Historical
|
|
|
7;5,9
|
5
|
9
|
Historical
|
|
|
7;$;4
|
$
|
4
|
Historical
|
Valid, but erroneous.
|
|
7;9
|
7
|
9
|
Historical
|
|
|
7;+
|
7
|
8
|
Historical
|
|
|
;
|
.
|
$
|
Historical
|
|
|
;7
|
.
|
7
|
Extension
|
|
|
;;
|
$
|
$
|
Extension
|
|
|
;,
|
$
|
$
|
Extension
|
|
Historically, values could be added to addresses by including them after one or more <blank>s; for example,
"3 - 5p" wrote the seventh line of the file, and "/foo/ 5" was the same as "5 /foo/"
. However, only absolute values could be added; for example, "5 /foo/" was an error. IEEE Std 1003.1-2001
requires conformance to historical practice.
Historically, ed accepted the '^' character as an address, in which case it was identical to the hyphen
character. IEEE Std 1003.1-2001 does not require or prohibit this behavior.
![[Option Start]](../images/opt-start.gif)
Determine the location of message catalogs for the processing of LC_MESSAGES . ![[Option End]](../images/opt-end.gif)