Skip Headers
SQL*Plus® User's Guide and Reference
Release 10.2

Part Number B14357-01
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Feedback

Go to previous page
Previous
Go to next page
Next
View PDF

9 SQL*Plus Security

This chapter describes the available methods for controlling access to database tables, SQL*Plus and iSQL*Plus commands, and iSQL*Plus access. It covers the following topics:

PRODUCT_USER_PROFILE Table

SQL*Plus uses the PRODUCT_USER_PROFILE (PUP) table, a table in the SYSTEM account, to provide product-level security that supplements the user-level security provided by the SQL GRANT and REVOKE commands and user roles.

DBAs can use the PUP table to disable certain SQL and SQL*Plus commands in the SQL*Plus environment on a per-user basis. SQL*Plus—not Oracle Database—enforces this security. DBAs can even restrict access to the GRANT, REVOKE, and SET ROLE commands to control users' ability to change their database privileges.

SQL*Plus reads restrictions from the PUP table when a user logs in to SQL*Plus and maintains those restrictions for the duration of the session. Changes to the PUP table will only take effect the next time the affected users log in to SQL*Plus.

When SYSTEM, SYS, or a user authenticating with SYSDBA or SYSOPER privileges connects or logs in, SQL*Plus does not read the PUP table. Therefore, no restrictions apply to these users.

The PUP table applies only to the local database. If accessing objects on a remote database through a database link, the PUP table for the remote database does not apply. The remote database cannot extract the username and password from the database link in order to determine that user's profile and privileges.

Creating the PUP Table

You can create the PUP table by running the script named PUPBLD with the extension SQL as SYSTEM. The exact format of the file extension and the location of the file are system dependent. See your DBA for more information.


Note:

If the table is created incorrectly, all users other than privileged users will see a warning when connecting to Oracle Database that the PUP table information is not loaded.

PUP Table Structure

The PUP table has the following columns:

PRODUCT                 NOT NULL VARCHAR2 (30)
USERID                  VARCHAR2(30)
ATTRIBUTE               VARCHAR2(240)
SCOPE                   VARCHAR2(240)
NUMERIC_VALUE           NUMBER(15,2)
CHAR_VALUE              VARCHAR2(240)
DATE_VALUE              DATE
LONG_VALUE              LONG

Description and Use of PUP Columns

The following list describes each column in the PUP table:

PUP Column Description
PRODUCT Must contain the product name (in this case "SQL*Plus"). You cannot enter wildcards or NULL in this column.
USERID Must contain the username (uppercase) of the user for whom you wish to disable the command. To disable the command for more than one user, use SQL wild cards (%) or make multiple entries. Thus, all of the following entries are valid:
  • HR

  • CLASS1

  • CLASS% (all users whose names start with CLASS)

  • % (all users)

ATTRIBUTE Must contain the name (in uppercase) of the SQL, SQL*Plus, or PL/SQL command to disable (for example, RUN). If you are disabling a role, it must contain the character string "ROLES". You cannot enter a wildcard. See PUP Table Administration for a list of SQL and SQL*Plus commands you can disable. See Creating and Controlling Roles for information on how to disable a role.
SCOPE Not used, it is recommended that you enter NULL. Other products may store specific file restrictions or other data in this column.
NUMERIC_VALUE Not used, it is recommended that you enter NULL. Other products may store numeric values in this column.
CHAR_VALUE Must contain the character string "DISABLED" to disable a SQL, SQL*Plus, or PL/SQL command. If you are disabling a role, it must contain the name of the role you wish to disable. You cannot use a wildcard. See Disabling Commands with SQLPLUS -RESTRICT for information on disabling a role.
DATE_VALUE Not used, it is recommended that you enter NULL. Other products may store DATE values in this column.
LONG_VALUE Not used, it is recommended that you enter NULL. Other products may store LONG values in this column.

PUP Table Administration

The DBA username SYSTEM owns and has all privileges on the PUP table. Other Oracle Database usernames should have only SELECT access to this table, which enables a view of restrictions for that username and those restrictions assigned to PUBLIC. The script PUPBLD.SQL, when run, grants SELECT access on the PUP table to PUBLIC.

Disabling SQL*Plus, SQL, and PL/SQL Commands

To disable a SQL or SQL*Plus command for a given user, insert a row containing the user's username in the Userid column, the command name in the Attribute column, and DISABLED in the Char_Value column. The Scope, Numeric_Value, and Date_Value columns should contain NULL. For example:

PRODUCT    USERID  ATTRIBUTE  SCOPE   NUMBERIC    CHAR       DATE    LONG
                                      VALUE       VALUE      VALUE   VALUE
-------    ------  ---------  -----   --------    ------     -----   -----
SQL*Plus   HR      HOST                           DISABLED
SQL*Plus   %       INSERT                         DISABLED
SQL*Plus   %       UPDATE                         DISABLED
SQL*Plus   %       DELETE                         DISABLED

To re-enable commands, delete the row containing the restriction.

SQL*Plus Commands That Can Be Disabled
ACCEPT DEFINE PASSWORD SHUTDOWN
APPEND DEL PAUSE SPOOL
ARCHIVE LOG DESCRIBE PRINT START (@, @@)
ATTRIBUTE DISCONNECT PROMPT STARTUP
BREAK EDIT RECOVER STORE
BTITLE EXECUTE REMARK TIMING
CHANGE EXIT/QUIT REPFOOTER TTITLE
CLEAR GET REPHEADER UNDEFINE
COLUMN HELP (?) RUN VARIABLE
COMPUTE HOST SAVE WHENEVER OSERROR
CONNECT INPUT SET WHENEVER SQLERROR
COPY LIST (;) SHOW XQUERY

SQL Commands That Can Be Disabled
ALTER DELETE MERGE SET CONSTRAINTS
ANALYZE DISASSOCIATE NOAUDIT SET ROLE
ASSOCIATE DROP PURGE SET TRANSACTION
AUDIT EXPLAIN RENAME TRUNCATE
CALL FLASHBACK REVOKE UPDATE
COMMENT GRANT ROLLBACK VALIDATE
COMMIT INSERT SAVEPOINT na
CREATE LOCK SELECT na

You can disable the following PL/SQL commands:

PL/SQL Commands That Can Be Disabled
BEGIN DECLARE na na


Note:

  • Disabling HOST disables the operating system alias for HOST, such as $ on Windows, and ! on UNIX.

  • Disabling LIST disables ; and numbers (numbers entered to go to that line in a script).

  • You must disable HELP and ? separately to disable access to command-line help.

  • Disabling the SQL*Plus SET command also disables SQL SET CONSTRAINTS, SET ROLE and SET TRANSACTION.

  • Disabling SQL*Plus START also disables @ and @@.

  • Disabling BEGIN and DECLARE does not prevent the use of SQL*Plus EXECUTE to run PL/SQL. EXECUTE must be disabled separately.

  • Disabling EXIT/QUIT is not recommended. If disabled, terminate a command-line session by sending an EOF character such as Ctrl+D in UNIX or Ctrl+Z in Windows. Terminate a Windows GUI session with File > Exit. Otherwise, terminate a session by terminating the SQL*Plus process. If disabled, using EXIT/QUIT to terminate the currently running script in iSQL*Plus is also disabled. If disabled, the EXIT operation in WHENEVER OSERROR and WHENEVER SQLERROR is also disabled.


Example 9-1 Setting Restrictions in the PUP Table

This is an example of how to insert a row into the PUP table to restrict the user HR from using the SELECT statement:

  1. Log in as SYSTEM with the command

    SQLPLUS SYSTEM
    
  2. Insert a row into the PUP table with the command:

    INSERT INTO PRODUCT_USER_PROFILE
    VALUES ('SQL*Plus', 'HR', 'SELECT', NULL, NULL, 'DISABLED', NULL, NULL);
    
  3. Connect as HR and try to SELECT something:

    CONNECT HR 
    SELECT * FROM EMP_DETAILS_VIEW; 
    

    This command causes the following error message:

    SP2-0544: Command SELECT disabled in Product User Profile
    

  4. To delete this row and remove the restriction from the user HR, CONNECT again as SYSTEM and enter:

    DELETE FROM PRODUCT_USER_PROFILE WHERE USERID = 'HR'; 
    

Creating and Controlling Roles

You can use SQL commands to create and control access to roles to provide security for your database tables. By creating a role and then controlling who has access to it, you can ensure that only certain users have access to particular database privileges.

Roles are created and used with the SQL CREATE, GRANT, and SET commands:

For more information about roles, see your Oracle Database SQL Reference, your Oracle Database Administrator's Guide, and your Oracle Database Concepts manual.

Disabling SET ROLE

From SQL*Plus, users can submit any SQL command. In certain situations, this can cause security problems. Unless you take proper precautions, a user could use SET ROLE to access privileges obtained through an application role. With these privileges, they might issue SQL statements from SQL*Plus that could wrongly change database tables.

To prevent application users from accessing application roles in SQL*Plus, you can use the PUP table to disable the SET ROLE command. You also need to disable the BEGIN and SQL*Plus EXECUTE commands to prevent application users setting application roles through a PL/SQL block. This gives a SQL*Plus user only those privileges associated with the roles enabled when they started SQL*Plus. For more information about the creation and usage of user roles, see your Oracle Database SQL Reference and Oracle Database Administrator's Guide.

Disabling User Roles

To disable a role for a given user, insert a row in the PUP table containing the user's username in the Userid column, "ROLES" in the Attribute column, and the role name in the Char_Value column.


Note:

When you enter "PUBLIC" or "%" for the Userid column, you disable the role for all users. You should only use "%" or "PUBLIC" for roles which are granted to "PUBLIC". If you try to disable a role that has not been granted to a user, none of the roles for that user are disabled.

The Scope, Numeric_Value, and Date_Value columns should contain NULL. For example:

PRODUCT    USERID  ATTRIBUTE  SCOPE   NUMERIC     CHAR      DATE     LONG
                                      VALUE       VALUE     VALUE    VALUE
-------    ------  ---------  -----   --------    ------    -----    -----
SQL*Plus   HR      ROLES                          ROLE1
SQL*Plus   PUBLIC  ROLES                          ROLE2

During login, these table rows are translated into the command

SET ROLE ALL EXCEPT ROLE1, ROLE2

To ensure that the user does not use the SET ROLE command to change their roles after login, you can disable the SET ROLE command.

To re-enable roles, delete the row containing the restriction.

See Disabling SET ROLE for more information.

Disabling Commands with SQLPLUS -RESTRICT

Like the Product User Profile table, the RESTRICT option enables you to disable certain commands that interact with the operating system. However, commands disabled with the -RESTRICT option are disabled even when no connection to a server exists, and remain disabled until SQL*Plus terminates.

The following table shows which commands are disabled in each restriction level.

Command Level 1 Level 2 Level 3
EDIT disabled disabled disabled
GET

disabled
HOST disabled disabled disabled
SAVE
disabled disabled
SPOOL
disabled disabled
START

disabled
STORE
disabled disabled


Note:

  • Disabling HOST also disables your operating system's alias for HOST, such as $ on Windows, and ! on UNIX.

  • Disabling the SQL*Plus START command will also disable the SQL*Plus @ and @@ commands.


For more information about the RESTRICT option, see the SQLPLUS RESTRICT Option.

Program Argument Security

Some operating systems allow any user to see what programs are being run. If the display also shows command-line arguments, it may be possible to view the usernames and passwords of other SQL*Plus users.

For example, on many UNIX or Linux systems the ps command shows program arguments. To stop passwords being displayed depends on how you use SQL*Plus.

When SQL*Plus is started like this, it uses the first line of the script as the username/password@connection_identifier string.

Avoid storing your username and password in files or scripts. If you do store your username and password in a file or script, ensure that the file or script is secured from non-authorized access.

iSQL*Plus Security

There are two main areas to consider for security and user authentication when using iSQL*Plus:

It is useful to note that in iSQL*Plus you cannot access the middle tier operating system to run commands such as HOST, EDIT and SPOOL which depend on operating system access.

In iSQL*Plus, security for the connection between the web browser and the Application Server is provided by standard HTTPS. It enables secure listener connections with an Oracle Database-provided encryption mechanism through the Secure Sockets Layer (SSL).

The Oracle Net connection between the iSQL*Plus Server and Oracle Database provides the same security as in previous client server architectures. It is recommended that you enable an Oracle Net listener password if possible. For more information about Oracle Net connection security, see the Oracle Database Net Services Administrator's Guide and the Oracle Advanced Security Administrator's Guide.

Enabling SSL with iSQL*Plus

You can enable security for the connection between the web browser and the iSQL*Plus Application Server using SSL.

To enable SSL for the iSQL*Plus Application Server, see Enabling SSL with iSQL*Plus.

For detailed information about SSL, see the Oracle Application Server Containers for J2EE Security Guide.

Administration Privileges

There are two modes of access to iSQL*Plus:

  • Connect as a normal user.

    Requires an Oracle Database account username and password entered in the iSQL*Plus Login screen.

  • Connect as a SYSDBA or SYSOPER privileged user.

    Requires an Oracle Database account username and password entered in the iSQL*Plus DBA Login screen, and an Application Server authentication username and password entered in a separate dialog.

Enabling DBA Access

To connect with SYSDBA or SYSOPER privileges, your username and password must be added to the iSQL*Plus authentication file for the iSQL*Plus Application Server. To enable DBA access, see Enabling iSQL*Plus DBA Access.

Enabling or Disabling Restricted Database Access

The restricted database parameter limits the databases that users can access in iSQL*Plus. When enabled, a dropdown list of available databases is displayed in place of the Connection Identifier text field on the Login screen. This enables greater security for iSQL*Plus Servers in hosted environments.

Connection identifiers are listed in the order defined by the iSQLPlusConnectIdList in the configuration file, web.xml.

For more information about restricted database access, see Enabling Restricted Database Access.

Security Usage Notes

The following notes may assist you in understanding and configuring iSQL*Plus:

  • Once you have successfully logged in with SYSDBA or SYSOPER privileges and authenticated with your Application Server authentication username and password, you may not be required to re-authenticate to the Application Server until you restart your browser. However, you are still required to log in with your Oracle Database username and password.

  • The Product User Profile (PUP) tables apply to each user in each database as for SQL*Plus client server installations.

    See PRODUCT_USER_PROFILE Table for more information about PUP tables.

  • The global configuration file glogin.sql is read from the middle tier machine as for a client server installation. login.sql files are not read.