Code Samples

CODE EXAMPLE 2-1 Hardware Reset Output From the System Controller

CODE EXAMPLE 2-2 Output From the setupnetwork Command

CODE EXAMPLE 2-3 Installing the LOM Drivers

CODE EXAMPLE 2-4 Installing the LOM Utility

CODE EXAMPLE 2-5 Installing the LOM Manual Pages

CODE EXAMPLE 5-1 Sample Output from the lom -c Command

CODE EXAMPLE 5-2 Sample Output from the lom -l Command

CODE EXAMPLE 5-3 Sample LOM Event Log (Oldest Event Reported First)

CODE EXAMPLE 5-4 Sample Output From the lom -f Command

CODE EXAMPLE 5-5 Sample Output From the lom -v Command

CODE EXAMPLE 5-6 Sample Output from the lom -t Command

CODE EXAMPLE 6-1 POST Output Using max Setting

CODE EXAMPLE 6-2 Setting SC POST Diagnostic Level to min

CODE EXAMPLE 6-3 SC POST Output With Diagnostic Level Set to min

CODE EXAMPLE 7-1 Example of Auto-Diagnosis Event Message Displayed on the Console

CODE EXAMPLE 7-2 Example of Message Output for Automatic Domain Recovery After the Operating System Heartbeat Stops

CODE EXAMPLE 7-3 Example of Console Output for Automatic Recovery After the Operating System Does Not Respond to Interrupts

CODE EXAMPLE 7-4 Domain Diagnosis Event Message - Nonfatal Domain Hardware Error

CODE EXAMPLE 7-5 Example of Auto-Diagnostic Message

CODE EXAMPLE 7-6 showboards Command Output - Disabled and Degraded Components

CODE EXAMPLE 7-7 showcomponent Command Output - Disabled Components

CODE EXAMPLE 7-8 showerrorbuffer Command Output--Hardware Error

CODE EXAMPLE 9-1 Console Log Output Containing Disabled COD CPUs

CODE EXAMPLE 9-2 showcomponent Command Output - Disabled COD CPUs

CODE EXAMPLE 11-1 Downloading the lw8pci.flash Image

CODE EXAMPLE 11-2 Downloading the lw8cpu.flash Image

CODE EXAMPLE 12-1 Output of the Basic cfgadm Command

CODE EXAMPLE 12-2 Output of the cfgadm -av Command