C H A P T E R 1 |
Accessing the Documentation FilesThe full documentation set for the Sun Fire E25K/E20K systems is available on the documentation CD.Insert the documentation CD into a CD-ROM or DVD-ROM drive.If you are accessing the documentation CD from a Power Macintosh, PC, or if your system is running Volume Manager, the CD-ROM will mount automatically.If your system is not running Volume Manager, become superuser and mount the CD-ROM manually. If your workstation has an IDE drive, the device is /dev/dsk/c0t2d0s2. To mount a CD-ROM manually from a workstation with SCSI drives, type:
# mkdir -p /cdrom/cdrom0# mount -o ro -F hsfs /dev/dsk/c0t6d0s2 /cdrom/cdrom0 |
List of Sun Fire E25K/E20K Systems Documentation
![]() |
System Overview | Sun Fire E25K/E20K Systems Binder SetSun Fire E25K/E20K Systems Overview Manual |
![]() |
Installation | Sun Fire E25K/E20K Systems Binder SetSun Fire E25K/E20K Systems Site Planning GuideSun Fire E25K/E20K Systems Hardware Installation and De-Installation GuideOther Installation DocumentsSystem Management Services (SMS) Administrator GuideSystem Management Services (SMS) Installation GuideSun Fire E25K/E20K Systems Read Me FirstSun Fire E25K/E20K Systems Unpacking GuideCable Manageent Guide Sun Fire HIgh-End Server SystemsSun Fire E25K/E20K Systems Task Map (see Task Map on the following page) |
![]() |
Administration | Sun Fire E25K/E20K SystemsOther Administration DocumentsSystem Management Services (SMS) Administrator GuideSystem Management Services (SMS) Reference ManualSun Fire High-End System Users Guide |
![]() |
Hardware Repair | Sun Fire E25K/E20K Systems Binder SetSun Fire E25K/E20K Systems Service ManualOther DocumentsSun Fire E25K/E20K Systems Service Reference I-NomenclatureSun Fire E25K/E20K Systems Service Reference II-Component NumberingSun Fire E25K/E20K Systems Carrier Plate Configurations |
![]() |
Globalization | Sun Fire E25K/E20K Systems Binder SetFrench, Korean, Simplified Chinese, and Traditional Chinese |
Installation Task Map for the Sun Fire E25K/E20K Systems
![]() |
Step 1 | Verify power, air conditioning, and floor area requirements--Refer to the Sun Fire E25K/E20K Systems Site Planning Guide |
![]() |
Step 2 | Set up cabinet, connect power cables--Refer to the Sun Fire E25K/E20K Systems Hardware Installation and De-Installation Guide |
Step 3 | Power on the Sun Fire 25K/20K systems--Refer to the Sun Fire E25K/E20K Systems Hardware Installation and De-Installation GuideAllow the systems to run through POST and ensure there are no errors, then power off the systems | |
Step 4 | Install options and storage devices--Refer to the documentation that came with the option or storage for details | |
Step 5 | Power on the Sun Fire 25K/20K systems again--Refer to the Sun Fire E25K/E20K Systems Hardware Installation and De-Installation Guide. | |
Step 6 | Configure the systems--Refer to the System Management Services (SMS) Administrator Guide and the Sun Fire E25K/E20K Software Overview Guide | |
Step 7 | Install Solaris![]() |
Copyright © 2004, Sun Microsystems, Inc. All rights reserved.