C H A P T E R 7

Specifications

This chapter summarizes the specifications and capabilities of the Sun Fire V60x and Sun Fire V65x servers. The capabilities require software to enable them.

7.1 Single or Dual Intel® Xeon Processors

2.8 GHz and 3.06 GHz

INT3/FCPGA sockets

604-pin package

7.2 Intel E7501 Chipset

Supports 533-MHz front side bus (FSB)

MCH memory controller (Northbridge)

ICH3-S controller (Southbridge)

P64H2 64-bit I/O hub

7.3 Memory

Six dual-inline memory modules (DIMMs) slots support:

DDR266 ^[1]-compliant, ECC, registered, 72-bit, 184-pin, DIMMs

x72 ECC organization

From 256 MB to 12 GB of memory (Sun Fire V65x server) or 6 GB (Sun Fire V60x server).

The ECC implementation detects and corrects single-bit errors and detects multiple-bit errors.

Two DIMMs must be populated in a bank for an x144 wide memory data path.

Any or all memory banks may be populated.

A DIMM failure LEDs is provided for each DIMM socket. An illuminated LED indicates a double-bit DIMM error.

7.4 Graphics and Video

Integrated onboard ATI RAGE XL PCI controller

SVGA video controller

Clock generator

2D and 3D engine

RAMDAC (random access memory digital to analog converter)

8 MB SDRAM of video memory

Video subsystem supports modes up to 1600 x 1200 resolution under 2D, and up to 1024 x 768 resolution under 3D.

Both CRT and analog LCD monitors are supported up to a 100 Hz vertical refresh rate through an onboard 15-pin VGA connector.

All standard IBM VGA modes are supported.

7.5 PCI Bus

Two PCI riser board slots are capable of supporting an of the following configurations:

Sun Fire V60x server configuration: one full-length, full-height 64-bit PCI riser board slot and one Low Profile (LP) 64-bit PCI riser board slot

Sun Fire V65x server configuration: three full-length, full-height 64-bit PCI riser board slots and three LP 64-bit PCI riser board slots

Three separate and independent PCI buses:

Segment A: 32-bit, 33 MHz, 5V (P32-A) with two embedded devices:

2D/3D graphics controller: ATI Rage* XL Video Controller with 8 MB of memory

Segment B: 64-bit, 133 MHz, 3.3V, PCI-X (P64-B) supporting the following configuration:

One PCI I/O riser board slot capable of supporting full length PCI add-in cards

Dual-channel Intel® 10/100/1000 82546EB Gigabit Ethernet Controller

Segment C: 64-bit, 133 MHz, 3.3V PCI-X (P64-C) supporting the following devices:

One PCI I/O riser board slot capable of supporting low-profile PCI add-in cards

Dual-channel SCSI with Zero Channel RAID (ZCR) and host RAID support

Note - The slot in the full-height and low-profile PCI riser boards closest to the main board is reserved for zero-channel RAID controller use.

7.6 SCSI

Dual-channel Ultra320 SCSI with zero-channel RAID support

Adaptec® AIC-7902W SCSI controller

Main board provides active terminators, termination voltage, a resettable fuse, and a protection diode for both SCSI channels.

7.7 Network Interface

Dual on-board 10/100/1000 82546EB Network Interface Controllers (NIC)

82546EB controller features:

32-bit, 133-MHz PCI-X bus master interface

Integrated IEEE 802.3 10BASE-T, 100BASE-TX and 1000BASE-TX compatible PHY'

IEEE 802.3u AutoNegotiation support

Full-duplex support at 10/100/1000 Mbps operation

Advanced Network Services (ALS):

Adapter fault tolerance (AFT) provides automatic redundancy for up to eight network adapters.

Preferred primary adapter designates one adapter as the Preferred Primary.

Adaptive load balancing (ALB) balances network traffic between two or more network adapters; AFT occurs automatically.

Cisco Fast EtherChannel* (an implementation of ALB) allows increased transmission rates in both directions.

Note - When implementing adapter teaming and ALB, the preferred configuration is to use the primary onboard NIC (NIC 1)^[2] for management functions and to use the secondary onboard NIC (NIC 2) and additional add-in NICs for the team.

Two onboard 8-pin, RJ-45 Ethernet connectors provide physical network connectivity. Each of the RJ-45 connectors includes a pair of status LEDs (link/activity LED and operating speed LED). The state of the individual LED indicates the following:

Link/activity LED: Solid green indicates an active network connection is present; blinking green indicates data transmit/receive activity

Speed LED: Off indicates 10 Mbps operation; solid amber indicates 100 Mbps operation

7.8 System I/O

One PS/2 keyboard/mouse port (6 pin DIN connector).

Two VGA video port 15-pin connectors available at front or back of server. Only one port can be used at a time.

Three external USB v1.1 ports (one at the front and two at the back), with an internal connector providing two additional USB ports.

One external serial COM2 port (RJ-45), and one internal COM 1 header.

One external SCSI port, and one internal.

Two RJ45 NIC ports.

One IDE connector, supporting one or two ATA-100 compatible devices.

7.9 Server Management Features

Baseboard Management Controller (BMC), which provides monitoring, alerting, and logging of critical system information obtained from embedded sensors on the server board. Also provides in band and out-of-band Lights-out and remote-management capability.

One rear-mount low-profile RJ-45 serial port connection to support compatible common serial line concentrators (for example, Cisco and Lantronix).

Variable-speed tachometer fans and thermal sensors throughout the server.

Fault/Status LEDs located throughout the server board for simple fault isolation.

Multiple server management headers providing on-board interconnects to server management features.

SSI-compliant connectors for SSI interface support: front panel, floppy, and
ATA-33.

IPMI 1.5 and DMI 2.0 standard interfaces to management functions.

Dedicated service partition on hard disk.

7.10 Power Supply

Sun Fire V60x server power supply: the power supply is rated for 350 watts of power at the following voltages:

100-127 V at 50/60 Hz; 4.96 A max.

200-240 V at 50/60 Hz; 2.48 A maximum

Sun Fire V65x server power supply: the power supply cage can support up to two TPW 500W SSI power supply modules in a 1+1 configuration or a non-redundant single module configuration (1+0). The cage incorporates dual AC inputs with two EMI filters. The following voltages are supported:

100-127 V at 50/60 Hz; 7.2 A max.

200-240 V at 50/60 Hz; 3.5 A maximum

7.11 Dimensions

Sun Fire V60x server:

Height: 1.693 in. (43 mm)

Width 16.93 in. (430 mm)

Depth: 23.89 in. (609.2 mm)

Sun Fire V65x server:

Height: 3.504 in. (89 mm)

Width 16.93 in. (430 mm)

Depth: 25.51 in. (648 mm)

7.12 Mounting Options

Mid mount

Four point mount

Front mount (with limitations)

7.13 Environmental

7.13.1 Ambient Temperature

Operating Temperature: +10o C to +35o C

Non-Operating Temperature: -40o C to +70o C

7.13.2 Relative Humidity

Non-Operating Humidity: 90% at 35° C non-condensing

7.13.3 Shock

Operating shock: no errors with a half sine wave shock of 2G (with 11 millisecond duration)

7.13.4 Acoustics

Sound Pressure: 55 dBA (rackmount) in an idle state at typical office ambient temperature (23° C ± 2° C).

Sound Power: 7.0 dBA in an idle state at typical office ambient temperature (23° C ± 2° C)

7.13.5 ESD

±15 kV

7.13.6 Altitude

Up to 3000 meters (9842 feet)

^{1 (Footnote) Only DDR266 is supported with a 533-MHz FSB. DDR200 or DDR266 is supported with a 400-MHz FSB.}

^{2 (Footnote) If NIC 1 is used for server management, do not aggregate NIC 1 with any other NIC port.}