| Sun StorEdge 3000 Family Installation, Operation, and Service Manual |     |
| Sun StorEdge 3000 Family Installation, Operation, and Service Manual | |
Sun StorEdge
3000 Family Installation, Operation, and Service Manual
Sun StorEdge 3310 SCSI Array
816-7290-15
|
Contents |
1.1 Introducing the Array Models
2.3 Environmental Requirements
2.3.1 Electromagnetic Compatibility (EMC)
2.4 Electrical and Power Specifications
2.7 Console and Other Requirements
3. Inspecting the Array Package
3.2 Checking the Package Contents
3.5 Mounting Your Array in a Rack or Cabinet
3.6 Converting a JBOD to a RAID Array
4.1 Converting Your Front Bezel Locks So the Keys Cannot Be Removed
4.4 Connecting the Chassis to an AC Power Outlet
4.5 Connecting the Chassis to DC Power Outlets
4.6 Single and Dual Drive-Bus Configurations
4.7 Connecting Cables for a Single-Bus Configuration
4.8 Connecting Cables for a Dual-Bus Configuration
4.9 Connecting SCSI Ports to Host(s)
4.9.1 Connecting a Sun StorEdge 3310 RAID Array
4.9.2 Connecting a Sun StorEdge 3310 JBOD Array
4.10 Cabling Configurations with Two Expansion Units
4.11 Configuring a COM Port to Connect to a RAID Array
4.13 Setting Up Out-of-Band Management Over Ethernet
5.1 Controller Defaults and Limitations
5.2 Single-Controller Considerations
5.4 Write-Back Versus Write-Through Cache Options
5.5 Accessing the Management Tools
5.6 First-Time Controller Configuration
5.6.1 Viewing the Initial Firmware Windows
5.6.2 Configuring SCSI Channels as Host or Drive (Optional)
5.6.3 Creating Additional Host IDs (Optional)
5.6.4 Selecting Sequential or Random Optimization
5.6.4.1 Maximum Number of Disks and Maximum Usable Capacity for Random and Sequential Optimization
5.6.5 Reviewing Default Logical Drives and RAID Levels
5.6.6 Completing Basic Configuration
5.6.7 Creating Logical Drive(s) (optional)
5.6.8 Preparing for Logical Drives Larger Than 253 Gbytes on Solaris Systems
5.6.9 Changing a Logical Drive Controller Assignment (Optional)
5.6.10 Partitioning a Logical Drive (optional)
5.6.11 Planning for 128 LUNs (Optional)
5.6.12 Mapping Logical Drive Partitions to Host LUNs
5.6.13 Saving Configuration (NVRAM) to a Disk
5.7.1 Other Supported Software
6.1 LEDs When Array Is First Powered On
7.1 Introducing Key Screens and Commands
7.1.1 The Controller Firmware Initial Screen
7.1.3 Quick Installation (Reserved)
7.3.1 Logical Drive Status Table
7.3.2 Logical Volume Status Table
7.3.4 SCSI Channel Status Table
7.3.5 Controller Voltage and Temperature Status
7.3.7 Viewing Event Logs on the Screen
7.4 Restoring Your Configuration (NVRAM) From a File
7.5.2 Controller Firmware Upgrade Features
7.5.3 Installing Firmware Upgrades
7.5.4 Installing Controller Firmware Upgrades from the Firmware Application
7.6 Replacing the Front Bezel and Ear Caps
7.6.1 Removing the Front Bezel and Ear Caps
7.6.2 Placing the Bezel and Ear Caps Back Onto the Chassis
8.1 RAID LUNs Not Visible to the Host
8.2 JBOD Disks Not Visible to the Host
8.4.1 Automatic Logical Drive Rebuild
8.4.3 Concurrent Rebuild in RAID 1+0
8.4.4 Identifying a Failed Drive for Replacement
8.4.7 Flash All But Selected Drive
8.4.8 Recovering From Fatal Drive Failure
A.2 Summary of Sun StorEdge 3310 SCSI Array Specifications
A.3 Agency Approvals and Standards
B.1 Known Limitations Affecting Sun StorEdge 3310 SCSI JBOD Arrays
B.2 Cabling a Single-Bus JBOD with One Host Connection
B.3 Cabling a Single-Bus JBOD with Two Host Connections
B.4 Cabling a Dual-Bus Single-Initiator JBOD Configuration
B.4.1 Connecting a Dual-Bus JBOD to One Host
B.5 Cabling a Dual-Bus, Multi-Initiator JBOD Configuration
B.6 Downloading Firmware to Disk Drives in a JBOD
B.7 Replacing a Disk Drive in a Sun StorEdge 3310 SCSI JBOD Array
B.7.2 Installing a New Disk Drive
B.7.3 Installing an Air Management Sled
B.8 Enabling VERITAS DMP in a Single-Bus Configuration
C. Failed Component Alarm Codes
D.1 View and Edit Logical Drives
D.1.1 Logical Drive Information
D.1.2 Logical Drive Partition Information
D.4 View and Edit SCSI Channels
D.5 View and Edit Peripheral Devices
D.6 Save NVRAM to Disk, Restore from Disk
E.1 SCSI Host or Drive Connector
F. Configuring a Server Running the Solaris Operating Environment
F.1 Accessing the Firmware Application From a Host Running the Solaris Operating Environment
F.3 Enabling a Host Running the Solaris Operating Environment to Recognize New Devices and LUNs
F.5 Making JBODs Visible to Hosts Running the Solaris Operating Environment
G. Configuring a Windows 2000 Server
G.1 Setting Up the Serial Port Connection
G.2 Accessing the Firmware Application From a Windows 2000 Server
G.3 Enabling a Windows 2000 Server to Recognize New Devices and LUNs
H.2 Multiple LUN Linux Configuration
H.3 Making an ext3 Filesystem for Linux
H.5 Creating a Mount Point and Mounting the Filesystem Manually
H.6 Mounting the Filesystem Automatically
I. Configuring an IBM Server Running the AIX Operating Environment
I.1 Setting Up a Serial Port Connection
I.2 Accessing the Firmware Application From an IBM Server Running AIX
I.3 Identifying the Device On Which To Create a Logical Volume
I.4 Using SMIT to Enable an AIX Host to Recognize New LUNs
I.8 Mounting the New File System
I.9 Verifying That the New File System Is Mounted
J. Configuring an HP Server Running the HP-UX Operating Environment
J.1 Setting Up a Serial Port Connection
J.2 Accessing the Firmware Application From an HP Server Running HP-UX
J.5 Definitions of Common Terms
J.6 Creating a Physical Volume
J.9 Creating an HP-UX File System
J.10 Mounting the File System Manually
J.11 Mounting the File System Automatically
K. Configuring a Windows NT Server
K.1 Setting Up the Serial Port Connection
K.2 Accessing the Firmware Application From a Windows NT Server
K.3 Enabling a Windows NT Server to Recognize New Devices and LUNs
| Sun StorEdge 3000 Family Installation, Operation, and Service Manual | 816-7290-15 | |
Copyright © 2004, Sun Microsystems, Inc. All rights reserved.