B - A P P E N D I X -

A P P E N D I X B

Console Output for the Automatic Software Install on the Cluster Nodes

The first portion of the installation installs the Solaris Operating Environment and configuration files, Solstice DiskSuite software, and patches on cluster node 1.

Resetting ...

screen not found.

Can't open input device.

Keyboard not present.  Using ttya for input and output.

Sun Enterprise 220R (2 X UltraSPARC-II 450MHz), No Keyboard

OpenBoot 3.23, 512 MB memory installed, Serial #12567953.

Ethernet address 8:0:20:bf:c5:91, Host ID: 80bfc591.

Rebooting with command: boot net - install

Boot device: /pci@1f,4000/network@1,1  File and args: - install

SunOS Release 5.8 Version Generic_108528-03 64-bit

Copyright 1983-2000 Sun Microsystems, Inc.  All rights reserved.

whoami: no domain name

Configuring /dev and /devices

Using RPC Bootparams for network configuration information.

NOTICE: SUNW,qfe7: No response from Ethernet network : Link Down - cable problem

Skipping interface qfe7

NOTICE: SUNW,qfe6: No response from Ethernet network : Link Down - cable problem

Skipping interface qfe6

Skipping interface qfe5

Skipping interface qfe4

NOTICE: SUNW,qfe3: No response from Ethernet network : Link Down - cable problem

Skipping interface qfe3

NOTICE: SUNW,qfe2: No response from Ethernet network : Link Down - cable problem

Skipping interface qfe2

Skipping interface qfe1

Configured interface qfe0

ifconfig: setifflags: SIOCSLIFFLAGS: qfe0: Cannot assign requested address

Configured interface hme0

Using sysid configuration file 192.212.87.38:/SOFTWARE/Solaris8_10-00/sysidcfg

The system is coming up.  Please wait.

Starting remote procedure call (RPC) services: sysidns done.

Starting Solaris installation program...

Searching for JumpStart directory...

Using rules.ok from 192.212.87.38:/SOFTWARE/Solaris8_10-00.

Checking rules.ok file...

Using profile: Profiles/sc3sconf1-n0.profile

Using finish script: Drivers/sc3sconf1-n0.driver

Executing JumpStart preinstall phase...

Searching for SolStart directory...

Checking rules.ok file...

Using begin script: install_begin

Using finish script: patch_finish

Executing SolStart preinstall phase...

Executing begin script "install_begin"...

Begin script install_begin execution completed.

Processing default locales

Processing profile

        - Selecting cluster (SUNWCXall)

        - Deselecting package (SUNWpmowm)

        - Deselecting package (SUNWpmowu)

        - Deselecting package (SUNWpmr)

        - Deselecting package (SUNWpmu)

        - Deselecting package (SUNWpmux)

- Deselecting package (SUNWpmux)

        - Selecting locale (en_US)

Installing 64 bit Solaris packages

        - Selecting all disks

        - Configuring boot device

        - Using disk (c0t0d0) for "rootdisk"

        - Configuring swap (c0t0d0s1)

        - Configuring /globaldevices (c0t0d0s6)

        - Configuring  (c0t0d0s7)

        - Configuring  (c0t1d0s1)

        - Configuring  (c0t1d0s6)

        - Configuring  (c0t1d0s7)

        - Configuring / (c0t0d0s0)

        - Configuring  (c0t1d0s0)

Verifying disk configuration

Verifying space allocation

        - Total software size:  734.50 Mbytes

Preparing system for Solaris install

Configuring disk (c0t0d0)

        - Creating Solaris disk label (VTOC)

Configuring disk (c0t1d0)

        - Creating Solaris disk label (VTOC)

Creating and checking UFS file systems

        - Creating / (c0t0d0s0)

        - Creating /globaldevices (c0t0d0s6)

Beginning Solaris software installation

Starting software installation

        TSBWvplu.u..done.  734.48 Mbytes remaining.

        TSBWvplr.u..done.  734.47 Mbytes remaining.

...

        SUNWnamos...done.    1.28 Mbytes remaining.

        SUNWnamow...done.    1.20 Mbytes remaining.

        SUNWnamox...done.    1.00 Mbytes remaining.

Completed software installation

Solaris 8 software installation succeeded

Customizing system files

        - Mount points table (/etc/vfstab)

        - Network host addresses (/etc/hosts)

Customizing system devices

        - Physical devices (/devices)

        - Logical devices (/dev)

Installing boot information

        - Installing boot blocks (c0t0d0s0)

Installation log location

        - /a/var/sadm/system/logs/install_log (before reboot)

        - /var/sadm/system/logs/install_log (after reboot)

Installation complete

Executing SolStart postinstall phase...

Executing finish script "patch_finish"...

Finish script patch_finish execution completed.

Executing JumpStart postinstall phase...

Executing finish script "Drivers/sc3sconf1-n0.driver"...

ROOT_DIR is set to /a.

FINISH_DIR is set to /tmp/install_config/Finish.

FILES_DIR is set to /tmp/install_config/Files.

Management Server "sc3sconf1-ms" (192.212.87.38) at 8:0:20:c2:1b:3c

Variable Settings (Final)

-------------------------------------------

Management Server's Default Router= "192.212.87.248"

Cluster Name= "sc3sconf1"

Terminal Server's Name= "sc3sconf1-tc"

Terminal Server's IP Address= "192.145.23.90"

First Node's Name= "sc3sconf1-n1"

First Node's IP Address= "192.145.23.91"

First Node's Ethernet Address= "9:8:50:bf:c5:91"

Second Node's Name= "sc3sconf1-n2"

Second Node's IP Address= "192.145.23.92"

Second Node's Ethernet Address= "8:9:10:cd:ef:b3"

building the /.profile file...

building the /etc/motd file to include cluster messages...

building the /.rhosts file to allow SDS rsh root access...

establishing the default router on the cluster node...

disabling software routing on the cluster node...

including customized environment in the /etc/hosts file...

UNAME is set to 5.8.

PACKAGE_MOUNT is set to 192.212.87.38:/SOFTWARE/Solaris8_10-00/Packages.

PACKAGE_DIR is set to /tmp/jumpstart-packages.

PATCH_MOUNT is set to 192.212.87.38:/SOFTWARE/Solaris8_10-00/Patches/.

PATCH_DIR is set to /tmp/install_config/Patches.

==============================================================

sc3sconf1-n0.driver: Driver started.

==============================================================

NOTICE: Mounting 192.212.87.38:/SOFTWARE/Solaris8_10-00/Packages on /a//tmp/jumpstart-packages.

NOTICE: Mounting 192.212.87.38:/SOFTWARE/Solaris8_10-00/Patches/ on /a//tmp/install_config/Patches.

==============================================================

sc3sconf1-n0.driver: Starting finish script: add_sds.fin

==============================================================

======================

Installing Package: SUNWmdg

===========================

Processing package instance <SUNWmdg> from </a/tmp/jumpstart-packages>

Solstice DiskSuite Tool

(sparc) 4.2.1,REV=1999.11.04.18.29

Copyright 2000 Sun Microsystems, Inc. All rights reserved.

## Executing checkinstall script.

Using </a> as the package base directory.

## Processing package information.

## Processing system information.

   4 package pathnames are already properly installed.

## Verifying disk space requirements.

Installing Solstice DiskSuite Tool as <SUNWmdg>

## Executing preinstall script.

## Installing part 1 of 1.

/a/usr/lib/lvm/X11/app-defaults/Metatool

/a/usr/lib/lvm/metatool-toolsmenu

[ verifying class <preserve> ]

## Executing postinstall script.

Killed

Killed

WARNING: Failed to register application "DiskSuite Tool" with solstice launcher.

Installation of <SUNWmdg> was successful.

===========================

Installing Package: SUNWmdja

===========================

Processing package instance <SUNWmdja> from </a/tmp/jumpstart-packages>

Solstice DiskSuite Japanese localization

(sparc) 4.2.1,REV=1999.12.09.15.37

Copyright 2000 Sun Microsystems, Inc. All rights reserved.

## Executing checkinstall script.

Using </a> as the package base directory.

## Processing package information.

## Processing system information.

   8 package pathnames are already properly installed.

## Verifying disk space requirements.

Installing Solstice DiskSuite Japanese localization as <SUNWmdja>

## Executing preinstall script.

## Installing part 1 of 1.

709 blocks

/a/usr/lib/lvm/X11/ja/app-defaults/Metatool

/a/usr/lib/lvm/locale/ja/metatool-toolsmenu

[ verifying class <preserve> ]

## Executing postinstall script.

Killed

Killed

WARNING: Failed to register application "DiskSuite Tool" with solstice launcher.

Installation of <SUNWmdja> was successful.

===========================

Installing Package: SUNWmdnr

===========================

Processing package instance <SUNWmdnr> from </a/tmp/jumpstart-packages>

Solstice DiskSuite Log Daemon Configuration Files

(sparc) 4.2.1,REV=1999.11.04.18.29

Copyright 2000 Sun Microsystems, Inc. All rights reserved.

## Executing checkinstall script.

Using </a> as the package base directory.

## Processing package information.

## Processing system information.

   3 package pathnames are already properly installed.

## Verifying disk space requirements.

Installing Solstice DiskSuite Log Daemon Configuration Files as <SUNWmdnr>

## Executing preinstall script.

## Installing part 1 of 1.

/a/etc/lvm/mdlogd.cf

[ verifying class <preserve> ]

## Executing postinstall script.

Installation of <SUNWmdnr> was successful.

===========================

Installing Package: SUNWmdnu

===========================

Processing package instance <SUNWmdnu> from </a/tmp/jumpstart-packages>

Solstice DiskSuite Log Daemon

(sparc) 4.2.1,REV=1999.11.04.18.29

Copyright 2000 Sun Microsystems, Inc. All rights reserved.

## Executing checkinstall script.

Using </a> as the package base directory.

## Processing package information.

## Processing system information.

   5 package pathnames are already properly installed.

## Verifying disk space requirements.

Installing Solstice DiskSuite Log Daemon as <SUNWmdnu>

## Installing part 1 of 1.

## Executing postinstall script.

Installation of <SUNWmdnu> was successful.

===========================

Installing Package: SUNWmdr

===========================

Processing package instance <SUNWmdr> from </a/tmp/jumpstart-packages>

Solstice DiskSuite Drivers

(sparc) 4.2.1,REV=1999.12.03.10.00

Copyright 2000 Sun Microsystems, Inc. All rights reserved.

## Executing checkinstall script.

Using </a> as the package base directory.

## Processing package information.

## Processing system information.

   8 package pathnames are already properly installed.

## Verifying disk space requirements.

Installing Solstice DiskSuite Drivers as <SUNWmdr>

## Executing preinstall script.

## Installing part 1 of 1.

/a/etc/lvm/devpath

/a/etc/lvm/md.cf

/a/etc/lvm/md.ctlrmap

/a/etc/lvm/md.tab

/a/etc/lvm/mddb.cf

/a/etc/lvm/runtime.cf

cp /a/tmp/jumpstart-packages/SUNWmdr/reloc/kernel/drv/md.conf /a/kernel/drv/md.conf

[ verifying class <preserve> ]

## Executing postinstall script.

Installation of <SUNWmdr> was successful.

===========================

Installing Package: SUNWmdu

===========================

Processing package instance <SUNWmdu> from </a/tmp/jumpstart-packages>

Solstice DiskSuite Commands

(sparc) 4.2.1,REV=1999.11.04.18.29

Copyright 2000 Sun Microsystems, Inc. All rights reserved.

## Executing checkinstall script.

Using </a> as the package base directory.

## Processing package information.

## Processing system information.

   10 package pathnames are already properly installed.

## Verifying disk space requirements.

Installing Solstice DiskSuite Commands as <SUNWmdu>

## Executing preinstall script.

## Installing part 1 of 1.

## Executing postinstall script.

Installation of <SUNWmdu> was successful.

===========================

Installing Package: SUNWmdx

===========================

Processing package instance <SUNWmdx> from </a/tmp/jumpstart-packages>

Solstice DiskSuite Drivers(64-bit)

(sparc) 4.2.1,REV=1999.11.04.18.29

Copyright 2000 Sun Microsystems, Inc. All rights reserved.

## Executing checkinstall script.

Using </a> as the package base directory.

## Processing package information.

## Processing system information.

   5 package pathnames are already properly installed.

## Verifying disk space requirements.

Installing Solstice DiskSuite Drivers(64-bit) as <SUNWmdx>

## Executing preinstall script.

## Installing part 1 of 1.

## Executing postinstall script.

Installation of <SUNWmdx> was successful.

==============================================================

sc3sconf1-n0.driver: Starting finish script: set_root_pw.fin

==============================================================

Setting password for root

Copying /a/etc/shadow to /a/etc/shadow.ORIG

==============================================================

sc3sconf1-n0.driver: Starting finish script: remote_root_enable.fin

==============================================================

===========================

Allowing remote root login.

===========================

==============================================================

sc3sconf1-n0.driver: Starting finish script: sds_file.fin

==============================================================

===================

Copying SDS Tool

===================

==============================================================

sc3sconf1-n0.driver: Starting finish script: set_mdtab_file.fin

==============================================================

========================

Copying SDS md.tab file

========================

==============================================================

sc3sconf1-n0.driver: Starting finish script: set_mirror_file.fin

==============================================================

==============================

Copying root/swap mirror file

==============================

==============================================================

sc3sconf1-n0.driver: Starting finish script: add_patch.fin

==============================================================

Patching Solaris 5.8

============================

Applying patch 108693-04

============================

Checking installed patches...

Verifying sufficient filesystem capacity (dry run method)...

Installing patch packages...

Patch number 108693-04 has been successfully installed.

See /a/var/sadm/patch/108693-04/log for details

Patch packages installed:

  SUNWmdg

  SUNWmdr

  SUNWmdu

  SUNWmdx

============================

Applying patch 108966-06

============================

Checking installed patches...

Verifying sufficient filesystem capacity (dry run method)...

Installing patch packages...

Patch number 108966-06 has been successfully installed.

See /a/var/sadm/patch/108966-06/log for details

Patch packages installed:

  SUNWcarx

  SUNWcsr

  SUNWhea

============================

Applying patch 109460-03

============================

Checking installed patches...

Verifying sufficient filesystem capacity (dry run method)...

Installing patch packages...

Patch number 109460-03 has been successfully installed.

See /a/var/sadm/patch/109460-03/log for details

Patch packages installed:

  SUNWhea

  SUNWluxd

  SUNWluxdx

  SUNWluxl

  SUNWluxlx

============================

Applying patch 109667-02

============================

Checking installed patches...

Verifying sufficient filesystem capacity (dry run method)...

Installing patch packages...

Patch number 109667-02 has been successfully installed.

See /a/var/sadm/patch/109667-02/log for details

Patch packages installed:

  SUNWntpu

NOTICE: Unmounting /a//tmp/jumpstart-packages.

NOTICE: Unmounting /a//tmp/install_config/Patches.

NOTICE: Unmounting /a/.

umount: /a busy

rmdir: directory "/a/": Directory is a mount point or in use

=============================================================

sc3sconf1-n0.driver: Driver finished.

=============================================================

Finish script Drivers/sc3sconf1-n0.driver execution completed.

The begin script log 'begin.log' is located in /var/sadm/system/logs after reboot.

The finish script log 'finish.log' is located in /var/sadm/system/logs after reboot.


	{2} ok boot net - install

Note - You can disregard the message, WARNING: Failed to register application "DiskSuit Tool" with solstice launcher. Solstice Launcher application is not installed.

After the first reboot, the second portion of the installation sets up the Solstice DiskSuite software.

Note - When prompted to "re-boot," type the reboot command.

screen not found.

Can't open input device.

Keyboard not present.  Using ttya for input and output.

Sun Enterprise 220R (2 X UltraSPARC-II 450MHz), No Keyboard

OpenBoot 3.23, 512 MB memory installed, Serial #12567953.

Ethernet address 8:0:20:bf:c5:91, Host ID: 80bfc591.

Rebooting with command: boot

Boot device: disk  File and args:

SunOS Release 5.8 Version Generic_108528-03 64-bit

Copyright 1983-2000 Sun Microsystems, Inc.  All rights reserved.

configuring IPv4 interfaces: hme0.

Hostname: sc3sconf1-n0

Configuring /dev and /devices

Configuring the /dev directory (compatibility devices)

The system is coming up.  Please wait.

checking ufs filesystems

/dev/rdsk/c0t0d0s6: is clean.

Configuring network interface addresses: hme0 qfe0 qfe1SUNW,qfe0: 100 Mbps half duplex link up - internal  transceiver

 qfe2NOTICE: SUNW,qfe2: No response from Ethernet network : Link Down - cable problem?

 qfe3NOTICE: SUNW,qfe3: No response from Ethernet network : Link Down - cable problem?

 qfe4 qfe5 qfe6NOTICE: SUNW,qfe6: No response from Ethernet network : Link Down - cable problem?

 qfe7NOTICE: SUNW,qfe7: No response from Ethernet network : Link Down - cable problem?

starting rpc services: rpcbind done.

Setting netmask of hme0 to 255.255.255.0

Setting netmask of qfe0 to 255.255.255.0

Setting default IPv4 interface for multicast: add net 224.0/4: gateway sc3sconf1-n0

syslog service starting.

Print services started.

Jan  3 17:03:58 sc3sconf1-n0 sendmail[446]: My unqualified host name (sc3sconf1-n0) unknown; sleeping for retry

volume management starting.

===========================

Setting up Meta DB's

===========================

============================================================

PLEASE WAIT: Setting up system for root and swap mirroring.

System will reboot after setup!

============================================================

d2: Concat/Stripe is setup

d3: Concat/Stripe is setup

d6: Concat/Stripe is setup

d7: Concat/Stripe is setup

d11: Concat/Stripe is setup

d12: Concat/Stripe is setup

d1: Mirror is setup

d5: Mirror is setup

d10: Mirror is setup

======================

odifying /etc/vfstab

======================

      Dump content: kernel pages

       Dump device: /dev/md/dsk/d5 (dedicated)

Savecore directory: /var/crash/sc3sconf1-n0

  Savecore enabled: yes

installing cluster software on the cluster nodes...

Found the sc3sconf1-n0  to be the first cluster node

** Installing SunCluster 3.0 **

        SUNWscr.....done

        SUNWscdev...done

        SUNWscu.....done

        SUNWscman...done

        SUNWscsal...done

        SUNWscsam...Jan  3 17:04:58 sc3sconf1-n0 sendmail[446]: unable to qualify my own domain name (sc3sconf1-n0) -- using short name

done

        SUNWscvm....done

        SUNWmdm.....done

Initializing cluster name to "sc3sconf1" ... done

Initializing authentication options ... done

Initializing configuration for adapter "qfe1" ... done

Initializing configuration for adapter "qfe5" ... done

Setting the node ID for "sc3sconf1-n0" ... done (id=1)

Checking for global devices global file system ... done

Checking device to use for global devices file system ... done

Updating vfstab ... done

Verifying that NTP is configured ... done

Installing a default NTP configuration ... done

Please complete the NTP configuration after scinstall has finished.

Verifying that "cluster" is set for "hosts" in nsswitch.conf ... done

Adding the "cluster" switch to "hosts" in nsswitch.conf ... done

Verifying that "cluster" is set for "netmasks" in nsswitch.conf ... done

Adding the "cluster" switch to "netmasks" in nsswitch.conf ... done

Verifying that power management is NOT configured ... done

Ensure network routing is disabled ... done

Please re-boot this machine.

Log file - /var/cluster/logs/install/scinstall.log.491

============================================================

System will reboot now!

============================================================

removing /etc/rc2.d/S94sds-mirror script...

Jan  3 17:05:12 sc3sconf1-n0 reboot: rebooted by root


	Resetting ...

After the second reboot, the system boots as a cluster node andjoins the cluster. The mirror metadevices are attached for the boot, swap, and global devices partitions.

Finally, node1 is mirrored and rebooted.

Boot device: disk  File and args:

SunOS Release 5.8 Version Generic_108528-03 64-bit

Copyright 1983-2000 Sun Microsystems, Inc.  All rights reserved.

WARNING: forceload of misc/md_trans failed

WARNING: forceload of misc/md_raid failed

WARNING: forceload of misc/md_hotspares failed

configuring IPv4 interfaces: hme0.

Hostname: sc3sconf1-n0

/usr/cluster/bin/scdidadm: Could not load DID instance list.

Cannot open /etc/cluster/ccr/did_instances.

Booting as part of a cluster

NOTICE: CMM: Node sc3sconf1-n0 (nodeid = 1) with votecount = 1 added.

NOTICE: CMM: Node sc3sconf1-n0: attempting to join cluster.

NOTICE: CMM: Cluster has reached quorum.

NOTICE: CMM: Node sc3sconf1-n0 (nodeid = 1) is up; new incarnation number = 978570394.

NOTICE: CMM: Cluster members: sc3sconf1-n0.

NOTICE: CMM: node reconfiguration #1 completed.

NOTICE: CMM: Node sc3sconf1-n0: joined cluster.

Configuring /dev and /devices

Configuring the /dev directory (compatibility devices)

Configuring DID devices

did instance 1 created.

did subpath /dev/rdsk/c0t0d0s2 created for instance 1.

did instance 2 created.

did subpath /dev/rdsk/c0t1d0s2 created for instance 2.

did instance 3 created.

did subpath /dev/rdsk/c0t6d0s2 created for instance 3.

obtaining access to all attached disks

The system is coming up.  Please wait.

starting rpc services: rpcbind done.

Setting netmask of lo0:1 to 255.255.255.255

Setting netmask of hme0 to 255.255.255.0

Setting default IPv4 interface for multicast: add net 224.0/4: gateway sc3sconf1-n0

syslog service starting.

obtaining access to all attached disks

Configuring the /dev/global directory (global devices)

obtaining access to all attached disks

Print services started.

Jan  3 17:08:51 sc3sconf1-n0 sendmail[329]: My unqualified host name (sc3sconf1-n0) unknown; sleeping for retry

d1: submirror d3 is attached

d5: submirror d7 is attached

d10: submirror d12 is attached

volume management starting.

The system is ready.

sc3sconf1-n0 console login:


	Rebooting with command: boot