| Netra 20 Installation and User's Guide |     |
| Netra 20 Installation and User's Guide | |
Netra 20 Installation and User's Guide
806-7334-13
|
Contents |
1. Introducing the Netra 20 Server
Before Installing the Netra 20 Server
Forced Air Cooling Requirements
3. Installing the Electrical Supply
Input Current, Power and Thermal Dissipation
Power and Grounding Connections
SCSI Cabling and Configuration
System Configuration Card Reader
7. System Start-Up and Operation
Introducing Lights Out Management
Powering On or Resetting the Server From the LOMlite2 Shell
Powering the Server On or Down to Standby Mode
Displaying the ok or kadb Prompt
Controlling the Server's Boot Behavior
Monitoring the Server From the LOMlite2 Shell
Checking the Current Status of All Components
Checking That a Component Has Been Fixed
Setting Up LOMlite2 Privileges for Named Users
Permissions Available for LOMlite2 Users
Creating a LOMlite2 User Account
Specifying the Password for a LOMlite2 User Account
Viewing Details of a LOMlite2 User Account
Changing Your Own User Password
Deleting a LOMlite2 User Account
Specifying Permissions for a Named User
Quitting a LOMlite2 Named User Session
Configuring the LOMlite2 Device
Setting the alarmon Software Flag
Setting the alarmoff Software Flag
Stopping LOMlite2 Sending Event Reports to the LOM Console Port
Separating LOMlite2 From the Console on the LOM Console Port
Dedicating the LOM console to LOMlite2
Sharing the LOM Console Port Between LOMlite2 and the Console
The LOMlite2 Shell Command List
11. Operating Lights Out Management from Solaris
Monitoring the System From Solaris
Viewing Online LOMlite2 Documentation
Checking the Power Supply Unit (lom -p)
Checking the Status of the PSU LEDs (lom -L)
Checking the Internal Circuit Breakers (lom -v)
Checking the Internal Temperature (lom -t)
Checking the Status of the Fault LED and Alarms (lom -l)
Changing the LOMlite2 Device's Watchdog Configuration (lom -w)
Viewing the LOMlite 2 Configuration (lom -c)
Viewing All Component Status Data and the LOMlite2 Configuration Data (lom -a)
Viewing the Event Log (lom -e)
Configuring the LOMlite2 to Restart the Server Automatically After a Lockup
Configuring the LOMlite2 Watchdog to Restart the System After a Lockup
Enabling the LOMlite2 Watchdog Process From Your Own Script or Command (lom -W on)
Setting the Hardware Reset Option From a Script or Command (lom -R on)
Other LOM Tasks Performed From Solaris
Turning Alarms On and Off (lom -A)
Turning the Fault LED On and Off (lom -F)
Changing the lom> Prompt Escape Sequence (lom -X)
Stopping LOMlite2 from Sending Reports to the Lom Console Port (lom -E off)
Removing Driver Protection From the LOMlite2 Driver (lom -U)
Making the LOMlite2 Interface Backward Compatible (lom -B)
Upgrading the LOMlite2 Firmware (lom -G filename)
Attaching the Antistatic Wrist Strap
Removing and Fitting the Mesh Screen
Changing a Disk Drive (Non Hot Swap)
Removing an Unmirrored Root Disk
Installing an Unmirrored Root Disk
C. Connecting to the Netra 20 Server
Connecting to the LOM Serial Port
Connecting to the Serial Ports
| Netra 20 Installation and User's Guide | 806-7334-13 | |
Copyright © 2003, Sun Microsystems, Inc. All rights reserved.